|
|
Research on Measurement of Geometric Parameters of Optical Fiber Endface Based on Machine Vision |
JIN Ke,CHEN Xiao-rong |
School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China |
|
|
Abstract A measurement method of optical fiber geometric parameters based on machine vision is studied. This method uses digital image processing algorithm. First, read the image of fiber end face and use Deriche edge detection algorithm to segment the image. Then, the effective edges are extracted and merged by using the algorithm of removing false edges. Finally, the geometric parameters of fiber end face are measured by curve fitting. The experimental results show that the method is simple to operate, low algorithm complexity, high fitting accuracy of optical fiber endface edge, fast data detection speed, and can accurately and efficiently detect the geometric parameters of optical fiber end face. The repeated measurement accuracy of coating layer diameter can reach 0.021 μm, and the repeated measurement accuracy of coating layer out of roundness can reach 0.043%.
|
Received: 26 October 2021
Published: 21 February 2023
|
|
|
|
|
|
Deng Y. Research on optical fiber communication technology and optical fiber transmission system[J]. Low Carbon World, 2018(1): 372-373.
|
[6] |
庞云龙, 刘佳, 王林. BCF-92 POF端面不圆度测量及应用[J]. 光通信技术, 2020, 44(7): 59-62.
|
[7] |
GB/T 15972. 20-2008光纤试验方法规范第20部分: 尺寸参数的测量方法和试验程序——光纤几何参数[S].
|
[9] |
李一鸣, 郑刚, 涂建坤, 等. 任意椭圆函数拟合法测量光纤几何参数[J]. 光电工程, 2019, 46(5): 32-39.
|
[11] |
邢雪亮, 甘文波, 蒋朝根. 基于机器视觉的航空铆钉尺寸检测技术[J]. 计量学报, 2020, 41(5): 518-523.
|
[12] |
孔明, 徐志玲, 徐勇, 等. 实际边缘轮廓下的螺栓综合尺寸质量检测[J]. 计量学报, 2021, 42(6): 724-730.
|
[2] |
Chen W, Yuan J, Zuo-Wei H E, et al. The Research Progress of High-end Optical Fiber Technologies for Large-capacity Communication[J]. Study on Optical Communications, 2017,1: 27-29+33.
|
|
Ouyang C. Measurement of Optical Fiber Geometric Parameters Based on Cubic Spline Function Fitting Method[J]. Digital Technology and Application, 2020, 38(12): 50-52.
|
|
Gui X, Li Z Y, Wang H M, et al. Review of Distributed Optical Fiber Sensing Technology and Application Based on Large-Scale Grating Array Fiber[J]. Journal of Applied Sciences, 2021, 39(5): 747-776.
|
[8] |
刘育彰, 高宏堂, 程银宝, 等. 基于单稳频激光的端面距离微尺寸测量方法[J]. 计量学报, 2021, 42(2): 144-149.
|
|
Kong M, Xu Z L, Xu Y, et al. Quality Inspection of Overall Bolt Dimension with Actual Edge Profile[J]. Acta Metrologica Sinica, 2021, 42(6): 724-730.
|
[14] |
Sinué Ontiveros, Roberto Jiménez, José A Yagüe-Fabra, et al. Analysis of Surface Extraction Methods Based on Gradient Operators for Computed Tomography in Metrology Applications. [J]. Materials, 2018, 11(8): 1461.
|
|
Zhou X. Rapid Detection for small Module Gear[J]. Techniques of Automation and Applications, 2017, 36(10): 104-107, 127.
|
[17] |
刘琰. 基于机器视觉的电子连接器注塑件尺寸检测[D]. 西安: 西安理工大学, 2021.
|
[19] |
刘斌, 董正天,胡春, 等. 基于机器视觉的丝网印刷样板尺寸测量方法[J]. 计量学报, 2021, 42(2): 150-156.
|
[20] |
GB/T 15972. 20-2021光纤试验方法规范第20部分: 尺寸参数的测量方法和试验程序——光纤几何参数[S].
|
[1] |
邓勇. 光纤通信技术与光纤传输系统的研究[J]. 低碳世界, 2018(1): 372-373.
|
[4] |
桂鑫, 李政颖, 王洪海, 等. 基于大规模光栅阵列光纤的分布式传感技术及应用综述[J]. 应用科学学报, 2021, 39(5): 747-776.
|
[5] |
Lu P, Mihailov S J, Ding H, et al. Plane-by-plane inscription of grating structures in optical fibers[C]// International Conference on Optical Fibre Sensors, Jeju, Korea, 2017.
|
|
Pang Y L, Liu J, Wang L. BCF-92 POF end face out-of-roundness measurement and application[J]. Optical Communication Technology, 2020, 44(7): 59-62.
|
[10] |
姜辉, 陈殿印, 朱一, 等. 光纤陀螺用光学器件的匹配优化[C]// 中国惯性技术学会第七届学术年会论文集, 武汉, 中国, 2015: 4.
|
[15] |
蒋凡. 基于图像处理的车载式隧道衬砌裂缝检测系统研究[D]. 西安: 长安大学, 2018.
|
[16] |
周鑫. 小模数齿轮的快速检测[J]. 自动化技术与应用, 2017, 36(10): 104-107, 127.
|
[18] |
孔盛杰, 黄翔, 周蒯, 等. 基于机器视觉的齿形结构齿顶圆检测方法[J]. 仪器仪表学报, 2021, 42(4): 247-255.
|
[3] |
欧阳琛. 基于三次样条函数拟合法测量光纤的几何参数[J]. 数字技术与应用, 2020, 38(12): 50-52.
|
|
Liu Y Z, Gao H T, Cheng Y B, et al. Measurement of Micro Transverse Spacing Using Single Frequency-stabilized Laser[J]. Acta Metrologica Sinica, 2021, 42(2): 144-149.
|
|
Li Y M, Zheng G, Tu J K, et al. Measurement of optical fiber geometry with arbitrary ellipse curve fitting[J]. Opto-Electronic Engineering, 2019, 46(5): 32-39.
|
|
Xing X L, Gan W B, Jiang C G. Technology of Size Detection of Air Rivets Based on Machine Vision[J]. Acta Metrologica Sinica, 2020, 41(5): 518-523.
|
[13] |
许海涛. 焊接机器人焊缝识别跟踪技术研究[D]. 南京: 东南大学, 2019.
|
|
Liu B, Dong Z T, Hu C, et al. Measurement Method of Screen Printing Template Size Based on Machine Vision[J]. Acta Metrologica Sinica, 2021, 42(2): 150-156.
|
|
Kong S J, Huang X, Zhou K, et al. Detection method of addendum circle of gear structure based on machine vision[J]. Chinese Journal of Scientific Instrument, 2021, 42(4): 247-255.
|
|
|
|