|
|
|
| Research on Calibration Device Design and Calibration Method of Video Extensometer |
| FANG Yong-qiang1,YU Ze-li1,YANG Jun-hong1,2,WEI Kang1,MA Xiao-chen1,ZHENG Yi1,YU Sen2 |
|
|
|
|
Abstract The video extensometer is used to measure the deformation of the material and needs online calibration and calibration. However, there is there is no guidance of corresponding standards and calibration specifications. An online calibration device of grating extensometer is designed, which is mainly composed of the controller, stepping motor, mechanical transmission mechanism, grating displacement sensor, a display and the composition of board, the calibration on board.The third-party calibration results show that the maximum relative error of the calibration distance is 0.07% (Urel=0.04%,k=2).Technical index of grating displacement: when less than or equal to 1/3mm, absolute error is less than 0.3μm (U=0.1μm, k=2); when greater than 1/3mm, relative error is less than 0.1% (Urel=0.04%, k=2), the technical index is obviously better than the requirements.The device is used to verify the repeatability and stability of the video extensometer, and the uncertainty of the calibration results is evaluated. The results show that the technical specifications of the device can fully meet the online calibration of the video extensometer.
|
|
Received: 19 November 2021
Published: 20 August 2022
|
|
|
|
|
|
［1］王春华, 陈武. 引伸计［M］. 北京: 中国计量出版社, 2008.
［2］胡世军, 张红香, 张代录, 等. 非接触式视频引伸计在力学性能试验中的应用 ［J］. 科技导报, 2012, 30 (19): 60-62.
Hu S J, Zhang H X, Zhang D L, et al. Application of Non-contact Video Extensometer in Mechanical Properties Test［J］. Science & Technology Review, 2012, 30 (19): 60-62.
［3］张悦, 潘兵, 郭广平, 等. 接触式与非接触式引伸计应变和泊松比测量精度比较 ［J］. 实验力学, 2018, 33 (1): 59-68.
Zhang Y, Pan B, Guo G P, et al. Comparison of strain and Poisson's ratio measurement accuracy between contact and non-contact extensometer ［J］. Experimental Mechanics, 2018, 33 (1): 59-68.
［4］Cantatore A, Ciga A, Sala R, et al. Hyperbolic tangent algorithm for periodic effect cancellation in subpixel resolution edge displacement measurement ［J］. Measurement, 2009, 42 (8): 1226-1232.
［5］Baida H A, Kermouche G, Langlade C. Development of an improved method for identifying material stress-strain curve using repeated micro-impact testing ［J］. Mech Mater, 2015, 86 (2): 11-20.
［6］Qu Z, Fang X E, Su H H, et al. Measurements for displacement and deformation at high temperature by using edge detection of digital image ［J］. Applied Optics, 2015, 54 (29): 8731-8737.
［7］张新洁, 谢哲东. 用于精密位移测量的视频引伸计系统的研究 ［J］. 仪器仪表学报, 2011, 32 (6): 61-65.
Zhang X J, Xie Z D. Research on video extensometer system for precision displacement measurement ［J］. Chinese Journal of Scientific Instrument, 2011, 32 (6): 61-65.
［8］包能胜, 方海涛. 连续运动螺纹尺寸自适应机器视觉检测 ［J］. 计量学报, 2020, 41 (9): 1062-1069.
Bao N S, Fang H T. Continuous motion thread size detection with adaptive machine vision ［J］. Acta Metrologica Sinica, 2020, 41 (9): 1062-1069.
［9］苏恒强, 冯雪, 于合龙, 等. 基于Harris角点检测的位移测量算法 ［J］. 实验力学, 2012, 27 (1): 45-53.
Su H Q, Feng X, Yu H L, et al. A New Algorithm for Displacement Measurement Based on Harris Corner Detection ［J］. Journal of Experimental Mechanice, 2012, 27 (1): 45-53.
［10］梁飞, 尹秋霞. 视频引伸计中Harris角点算法的改进 ［J］. 工具技术, 2018, 52 (3): 139-141.
Liang F, Yin Q X. Improvement and Application of Harris Corner Detection in Video Extensometer ［J］. Tool Engineering, 2018, 52 (3): 139-141.
［11］张吉雷, 郑会宝, 张永侠. 视频引伸计用纤维复丝拉伸测试技术的研究 ［J］. 计量与测试技术, 2017, 44 (6): 74-76.
Zhang J X, Zheng H B, Zhang Y X. Study on tensile testing technology of fiber complex wire for video extensometer ［J］. Metrology and Measurement Technology, 2017, 44 (6): 74-76.
［12］Fang X, Yu H, Zhang G, et al. In situ observation and measurement of composites subjected to extremely high temperature ［J］. Review of Scientific Instruments, 2014, 85 (3): 1409-1839.
［13］Fang X, Jia J, Feng X. Three-point bending test at extremely high temperature enhanced by real-time observation and measurement ［J］. Measurement, 2015, 59: 171-176.
［14］杨俊, 孙叶青, 申屠南瑛, 等. 基于Mask R-CNN算法的尾矿库干滩长度视频测量研究 ［J］. 计量学报, 2020, 41 (12): 1468-1474.
Yang J, Sun Y Q, Shentu N Y, et al. Research on video Measurement of dry beach length of tailings pond based on Mask R-CNN algorithm ［J］. Acta Metrologica Sinica, 2020, 41 (12): 1468-1474.
［15］GB/T 12160—2019 金属材料单轴试验用引伸计系统的标定 ［S］.
［16］JJG 762—2007 引伸计［ S］.
［17］ISO 9513: 2012 (E) Metallic materials-Calibration of extensometer systems used in uniaxial testing ［S］.
［18］刘美. 视频引伸计系统研究 ［D］. 长春: 吉林大学, 2015.
［19］卢建国, 朱瑞, 杨康顶. 一种全自动视频引伸计: 中国, CN202011382372.7［P］. 2021-04-20.
［20］刘仁云, 孙秋成, 王春艳. 数字图像中边缘检测算法研究 ［M］. 北京: 科学出版社, 2016.
［21］柴兴华, 张静, 陈昕, 等. 视频引伸计离面位移误差及校正方法 ［J］. 计量学报, 2017, 38 (6): 717-720.
Chai X H, Zhang J, Chen X, et al. Out-plane Error and Correction in Measurement Using Video Extensometer ［J］. Acta Metrologica Sinica, 2017, 38 (6): 717-720.
［22］张敬敏, 王春华, 周巍松, 等. 视频引伸计的误差源解析 ［J］. 物理测试, 2013, 31 (3): 25-28.
Zhang J M, Yu C H, Zhou W S, et al. Error source analysis of video extensometer ［J］. Physics Examination and Testing, 2013, 31(3): 25-28.
［23］房永强, 魏康, 朱路瑶, 等. 一种非接触式视频引伸计的校准装置: 中国, 202122859039. 7［P］. 2021-11-22.
［24］房永强, 郑铱, 王柯, 等. 一种非接触式视频引伸计校准用标定板安装台: 中国, 202122859038.2［P］. 2021-11-22.
［25］江文松,尹肖,李泓洋,等. 基于参数辨识的力传感器动态校准方法［J］. 计量学报, 2021, 42(5): 603-608.
Jiang W S,Yin X,Li H Y,et al. Dynamic Calibration Method of a Force Transducer Based on Parameter Identification［J］. Acta Metrologica Sinica, 2021, 42(5): 603-608.
［26］荆根强, 郭鸿博, 刘璐, 等. 双轮式摩擦仪测量模型的共激励源动态标定方法 ［J］. 计量学报, 2019, 40 (6): 1071-1076.
Jin G Q, Guo H B, Liu L, et al. Dynamic calibration method of common excitation source for dual-wheel friction instrument measurement model ［J］. Acta Metrologica Sinica, 2019, 40 (6): 1071-1076.
［27］北京航天计量测试技术研究所. 基于零膨胀陶瓷标定板的视觉测量系统动态校正方法: 中国, CN202011382690.3 ［P］. 2021-04-09.
［28］肖晓芳, 陈丽梅, 程敏熙. 测量玻璃热膨胀系数和折射率温度系数实验 ［J］. 实验室研究与探索, 2010, 29 (4): 24-26.
Xiao X F, Chen L M, Cheng M X. Experiment of Measuring the Thermal Expansion Coefficient and the Coefficient of Glass Refraction Index Against Temperature ［J］. Research and Exploration in Laboratory, 2010, 29 (4): 24-26. |
|
|
|
2022, Vol. 43 
