差阻式读数仪校准方法的研究及不确定度分析

doi:10.3969/j.issn.1000-1158.2020.Z1.29

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (1096 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In view of the fact that the only measurement method can not meet the calibration requirements of high accuracy and full range differential resistor reading instrument, the digital multimeter is proposed as the measurement standard, and the comparison method is used to calibrate the resistance ratio indication error, resistance indication error. The uncertainty of measurement results of resistance ratio indication error is analyzed, and the expanded uncertainty is 6×10^-5(k=2). In order to improve the accuracy of measurement results, the method of adding variable resistance into the calibration circuit is used to measure the influence of core wire resistance on indication value. At the same time, the four wire resistance linearity experiment is carried out to analyze the reliability of DMM as the measurement standard, and then verify the scientificity of calibration method.

Key words： metrology differential resistor reading instrument digital multimeter resistance ratio calibration uncertainty analysis

PACS:

TB971

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HE Hao-peng
	ZHANG Xin

Cite this article:

HE Hao-peng,ZHANG Xin. Study on Calibration Method of Differential Resistor Reading Instrument and Uncertainty Analysis[J]. Acta Metrologica Sinica, 2020, 41(12A): 162-166.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2020.Z1.29 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2020/V41/I12A/162

［1］储海宁, 张德康. 差阻式仪器的发展和应用［J］. 大坝与安全, 2005,(5): 44-48.
Chu H N, Zhang D K. Research and Developmwnt on the differential resistance type instruments［J］. Dam and Safety, 2005,(5): 44-48.
［2］卢欣春, 吕刚, 李杰. 差阻式仪器和振弦式仪器的性能特点及改进［J］. 水电自动化与大坝监测, 2011, 35(2): 56-58.
Lu X C, Lü G, Li J. Characteristics and Improvement of Differential Resistance and Vibrating Wire Instruments［J］. Hydropower Automation and Dam Monitoring, 2011, 35(2): 56-58.
［3］刘敏飞. 已埋设差动电阻式传感器的鉴定［J］. 大坝与安全, 2005,(5): 53-57.
Liu M F. Identification of differential resistance sensors embedded［J］. Dam and Safety, 2005,(5): 53-57.
［4］黄兰. 电桥率定器校准结果不确定度评定中相关问题的探讨［J］. 中国计量, 2007,(3): 85-86.
Huang L. Discussion on Uncertainty Evaluation of calibration results of bridge calibrator［J］. China Metrology, 2007,(3): 85-86.
［5］邵灿辉, 倪维东, 施海莹. 基于MSP430的新一代差阻式读数仪的设计与实现［J］. 自动化与仪表, 2013,(5): 18-21.
Shao C H, Ni W D, Shi H Y. Design and Realization of A New Generation Differential Resistor Reading Instrument Based on MSP430［J］. Automation & Instrumentation, 2013,(5): 18-21.
［6］储海宁. 关于差值式仪器的几个技术问题［J］. 大坝与安全, 2007,(1): 21-28.
Chu H N. Some technique points about the differential resistance type instruments［J］. Dam and Safety, 2007,(1): 21-28.
［7］李广彪, 叶红, 储华平, 等. 差动电阻式仪器的自动化测量及应用［J］. 水利水文自动化, 2005,(2): 34-37.
Li G B, Ye H, Chu H P, et al. Automatic Measurement and Application of Differential Resistance type Instruments［J］. Automation in Water Resources and Hydrology, 2005,(2): 34-37.
［8］莫正潮, 储华平. 差动电阻式仪器的自动化测量及在江垭大坝的应用［J］. 大坝与安全, 2004,(5): 70-71.
Mo Z C, Chu H P. Differential Resistance apparatus automation and application in Jiangya dam［J］. Dam and Safety, 2004,(5): 70-71.
［9］江晓明. 再谈差阻式仪器电阻比测量误差的分析方法［J］. 大坝与安全, 2012,(6): 27-32.
Jiang X M. Further discussion on the analysis method of resistance ratio error of Carlson transducer［J］. Dam and Safety, 2012,(6): 27-32.
［10］江晓明, 张德康. 重新认识差阻式传感器［J］. 西北水电, 2011, (S1): 111-114.
Jiang X M, Zhang D K. Re-understanding of Carlson transducer［J］. Northwest Hydropower (Supplement), 2011, (S1): 111-114.
［11］吴婉玲. 差阻式观测资料的参见误差分析［J］. 大坝与安全, 2004,(1): 57-59.
Wu W L. Error analysis on original observational data of differential-resistance meters［J］. Dam and Safety, 2004,(1): 57-59.
［12］DL/T 1742-2017 差动电阻式仪器测量仪表［S］. 2017.
［13］胡毅飞, 赵伟, 朱珠, 等. 直流数字纳伏表校准装置研究［J］. 计量学报, 2007, 28(1): 5-9.
Hu Y F, Zhao W, Zhu ZH, et al. A Study of Calibration System of DC Digital Nanovoltmeter［J］. Acta Metrologica Sinica, 2007, 28(1): 5-9.
［14］马原. 电测仪表所受干扰的分析及预防方法分析［J］. 电子测试, 2020,(4): 52-53.
Ma Y. Analysis and prevention of interference on electric measuring instrument［J］. Electronic Testing, 2020,(4): 52-53.
［15］张建永, 岳伟, 贾云涛. 一种数字表检定标准电阻的方法［J］. 电子测量技术, 2013, 36(5): 41-44.
Zhang Y J, Yue W, Jia Y T. Calibration method of resistances with digital millimeters［J］. Electronic measurement Technology, 2013, 36(5): 41-44.
［16］DL/T 1254-2013 差动电阻式监测仪器鉴定技术规程［S］. 2013.