|
|
Study on the Stack Cross Section Area Calibration Facility and Its Uncertainty Evaluation |
YANG Yang1,2,ZHANG Liang2,3,ZHANG Hong-jun1,WANG Chi2,3,KONG Hai-yan4,5,ZHU Ze-jun4,5 |
1.中国计量大学 计量测试工程学院, 浙江 杭州 310018
2.中国计量科学研究院, 北京 100029
3.郑州计量先进技术研究院, 河南 郑州 450001
4.河南省环境监测技术重点实验室, 河南 郑州 450004
5.河南省生态环境监测中心,河南郑州450004 |
|
|
Abstract In order to ensure the accuracy of stack flowrate measurement based on velocity area method,it is necessary to accurately measure the stack cross section area.A stack cross section area calibration facility is developed,which can accurately measure the internal geometry of stack,and then calculat cross section area.At the same time,the cross section area fitting characteristics of random sampling method and least square method are discussed.After comparison and optimization,the maximum error of the average value of the fitted model is 0.02%,and the facility repeatability is 0.013%.Meanwhile the measurement uncertainty of the facility is evaluated,and the relative expended uncertainty is 0.17%(k=2).
|
Received: 20 December 2019
Published: 02 November 2020
|
|
|
|
|
[1]邹冰妍, 林鸿, 张亮, 等. 点排放源中二氧化碳浓度的测量研究 [J]. 计量学报, 2019, 40 (2): 246-251.
Zou B Y, Lin H, Zhang L, et al. Investigation on CO2 Concentration Measurement for Point Emission Source [J]. Acta Metrologica Sinica, 2019, 40 (2): 246-251.
[2]胡鹤鸣, 王池, 张金涛. 城市区域碳排放测量反演研究国际进展 [J]. 计量学报, 2017, 38 (1): 7-12.
Hu H M, Wang C, Zhang J T. International Research Overview of Inversion Approach of Carbon Emission Measurement in Urban Area [J]. Acta Metrologica Sinica, 2017, 38 (1): 7-12.
[3]Zhu L, Wei W. Reduced carbon emission estimates from fossil fuel combustion and cement production in China [J]. Nature, 2015, 524: 335-338.
[4]Katherine V,Eric T. Comparison of Two U. S. Power-Plant carbon dioxide emissions data sets [J]. Environ Sci Technol, 2008, 42 (15): 5688-5693.
[5]田晓峰, 陈崧. 火电厂烟气排放连续监测系统的检测 [J]. 电力环境保护, 2009, 25 (5): 61-62.
Tian X J, Cheng S. Verification of continuous emissions monitoring system in the mal power plants [J]. Electric Power Environmental Protection, 2009, 25 (5): 61-62.
[6]杨凯, 周刚, 王强, 等. 烟尘烟气连续自动监测系统技术现状和发展趋势 [J]. 中国环境监测, 2019, 40 (2): 246-251.
Yang K, Zhou G, Wang Q, et al. The Current Technical Situation and Development Tendency of Continuous Emis-sion Monitoring System [J]. Environmental Monitoring in China, 2019, 40 (2): 246-251.
[7]邓千封, 张亮, 方立德,等. 烟道流量计量标准装置 [J]. 计量学报, 2020, 41 (5): 567-572.
Deng Q F, Zhang L, Fang L D, et al. Stack flowrate standard facility [J]. Acta Metrologica Sinica, 2020, 41 (5): 567-572.
[8]马若梦, 林鸿, 张亮等. 基于多次反射直接吸收精确测量二氧化碳浓度的研究 [J]. 计量学报, 2020, 41 (4): 425-429.
Ma R M, Ling H, Zhang L et al. Research based on accurate measurement of carbon dioxide concentration by multiple reflection direct absorption [J]. Acta Metrologica Sinica, 2020, 41 (4): 425-429.
[9]王崇倡, 王晓婉, 徐晓昶. 圆柱面拟合方法研究 [J]. 测绘工程, 2014, 23 (3): 5-9.
Wang C C, Wang X W, Xu X C. Study on the cylindrical surface fitting method [J]. Engineering of Surveying and Mapping, 2014, 23 (3): 5-9.
[10]吴剑亮, 李艳, 高扬, 等. 基于改进RANSAC算法的道路直线提取方法 [J]. 地理空间信息, 2017, 15 (5): 42-44.
Wu J L, Li Y, GAO Y, et al. Road straight line extraction method based on improved RANSAC algorithm [J]. Geospatial Information, 2017, 15 (5): 42-44.
[11]吴子为. 随机抽样一致性算法在三维点云数据中轴线拟合中的应用研究 [J]. 测绘地理信息, 2018, 43 (3): 51-54.
Wu Z W. Application of Random Sample Consensus Algorithm in Central Axis Fitting of 3D Point Cloud [J]. Journal of Geomatics, 2018, 43 (3): 51-54.
[12]袁建刚, 潘轶. 一种圆柱面拟合方法 [J]. 工程勘察, 2017, 45 (12): 60-64.
Yuan Z G, Pang Y. A cylindrical surface fitting method [J]. Geotechnical Investigation, 2017, 45 (12): 60-64.
[13]王中宇, 付继华, 孟浩. 二维表面粗糙度最小二乘评定基准线的改进 [J]. 计量学报, 2008, 29(3): 203-206.
Wang Z Y, Fu J H, Meng H. Modified Least Square Reference Line for Surface Roughness Evaluation [J]. Acta Metrologica Sinica, 2008, 29(3): 203-206.
[14]王汉斌, 黄垚, 薛梓, 等. 激光小角度基准测量不确定度评定 [J]. 计量学报, 2019, 40(6): 970-974.
Wang H B, Huang Y, Xue Z, et al. Measurement Uncertainty Evaluation for the Laser Small Angle Primary Standard [J]. Acta Metrologica Sinica, 2019, 40(6): 970-974.
[15]张强. 计量测试误差影响及对测量不确定度的评定探讨 [J]. 计量与测试技术, 2017, 44 (5): 49-51.
Zhang Q. Influence of Measurement Error and Evaluation of Measurement Uncertainty [J]. Measurement Technique, 2017, 44 (5): 49-51.
[16]张岩, 孙世宇, 胡永江, 等. 基于特征距离与内点的随机抽样一致性算法 [J]. 电子与信息学报, 2018, 40 (4): 928-935.
Zhang Y, Sun S Y, Hu Y J, et al. Random Sample Consensus Algorithm Based on Feature Distance and Inliers [J]. Journal of Electronics and Information Technology, 2018, 40 (4): 928-935. |
|
|
|