[1]Lin Y, Zhao H, Ding H. Posture optimization methodology of 6R industrial robots for machining using performance evaluation indexes [J]. Robotics & Computer Integrated Manufacturing, 2017, 48:59-72.
[2]Mejri S, Gagnol V, Le T, et al. Dynamic characterization of machining robot and stability analysis [J]. International Journal of Advanced Manufacturing Technology, 2016, 82 (1-4): 351-359.
[3]Lehmann C, Pellicciari M, Drust M, et al. Machining with industrial robots: the COMET project approach [J]. Robotics in Smart Manufacturing. 2013, 371 (4):27-36.
[4]Jiao J, Tian W, Liao W, et al. Processing confi-guration off-line optimization for functionally redundant robotic drilling tasks [J]. Robotics & Autonomous Systems, 2018, 110: 112-123.
[5]杨守瑞, 尹仕斌, 任永杰, 等. 机器人柔性视觉测量系统标定方法的改进 [J]. 光学精密工程, 2014, 22 (12): 3239-3246.
Yang S R, Yin S B, Ren Y J, et al. Improvement of calibration method for robotic flexible visual measurement systems[J]. Optics and Precision Engineering, 2014, 22 (12): 3239-3246.
[6]Joubair A, Bonev I. Kinematic calibration of a six-axis serial robot using distance and sphere constraints [J]. International Journal of Advanced Manufacturing Technology, 2015, 77 (1-4): 515-523.
[7]张旭, 郑泽龙, 齐勇. 6自由度串联机器人D-H模型参数辨识及标定 [J]. 机器人, 2016, 38 (3): 360-370.
Zhang X, Zheng Z L, Qi Y. Parameter Identification and Calibration of D-H Model for 6-DOF Serial Robots [J]. Robot/Jiqiren, 2016, 38 (3): 360-370.
[8]陆艺,葛文琦,郭斌.基于标准球距离约束的工业机器人参数标定[J]. 计量学报, 2020, 41(9): 1048-1054.
Lu Y, Ge W Q, Guo B. Calibration of Industrial Robot Parameters Based on Standard Ball Distance Constraints[J]. Acta Metrologica Sinica, 2020, 41(9): 1048-1054.
[9]Judd R, Knasinski A. A technique to calibrate industrial robots with experimental verification [J]. IEEE Tran-sactions on Robotics and Automation, 1990, 6 (1): 20-30.
[10]Chen G, Li T, Chu M, et al. Review on kinematics calibration technology of serial robots [J]. International Journal of Precision Engineering and Manufacturing, 2014, 15 (8): 1759-1774.
[11]任瑜,张丰,郭志敏,等.一种通用的工业机器人位姿检测方法[J]. 计量学报, 2018, 39 (5): 615-621.
Ren Y, Zhang F, Guo Z M, et al. A General Pose Testing Method of Industrial Robot[J]. Acta Metrologica Sinica, 2018, 39 (5): 615-621.
[12]温秀兰,崔俊宇,芮平,等.轴线测量与迭代补偿的机器人几何参数标定[J]. 计量学报, 2018, 39(4): 449-454.
Wen X L, Cui J Y, Rei P, et al. Robot Geometric Parameters Calibration Based on Axis Measurement and Iterative Compensation[J]. Acta Metrologica Sinica, 2018, 39(4): 449-454.
[13]林嘉睿, 邾继贵, 张皓琳,等.激光跟踪仪测角误差的现场评价 [J]. 仪器仪表学报, 2012, 33 (2): 463-468.
Lin J R, Zhu J G, Zhang H L, et al. Field evalua-tion of laser tracker angle measurement error [J]. Chinese Journal of Scientific Instrument, 2012, 33 (2): 463-468.
[14]Schmitt R, Peterek M, Morse E, et al. Advances in Large-Scale Metrology-Review and future trends [J]. Cirp Annals-Manufacturing Technology, 2016, 65 (2): 643-665.
[15]任瑜, 刘芳芳, 张丰, 等. 激光跟踪仪多边测量的不确定度评定 [J].光学精密工程, 2018, 26 (10): 2415-2422.
Ren Y, Liu F F, Zhang F, et al. Evaluation of uncertainty in multilateration with laser tracker[J]. Optics And Precision Engineering, 2018, 26 (10): 2415-2422.
[16]Zhang G, Li X, Lin Y, et al. A study on the optimal design of laser-based multi-lateration systems [J]. CIRP Annals, 2003, 52 (1): 427-430.
[17]林永兵, 张国雄, 李真, 等. 四路激光跟踪干涉三维坐标测量系统自标定与仿真 [J]. 仪器仪表学报, 2003, 24 (2): 205-210.
Lin Y B, Zhang G X, Li Z, et al. Selfcalibration and Simulation of the Four-beam Laser Tracking Interfero-meter System for 3D Coordinate Measurement [J]. Chinese Journal of Scientific Instrument, 2003, 24 (2): 205-210.
[18]Zhang D, Rolt S, Maropoulos P. Modelling and optimization of novel laser multilateration schemes for high-precision applications [J]. Measurement Science & Technology, 2005, 16 (12): 2541.
[19]Aguado S, Santolaria J, Samper D, et al. Influence of measurement noise and laser arrangement on meas-urement uncertainty of laser tracker multi-lateration in machine tool volumetric verification [J]. Precision Engineering, 2013, 37 (4): 929-943.
[20]Conte J, Majarena A, Aguado S, et al. Calibration strategies of laser trackers based on network measur-ements [J]. International Journal of Advanced Manu-facturing Technology, 2016, 83 (5-8): 1161-1170.
[21]Wang J, Guo J, Zhou B, et al. The detection of rotary axis of NC machine tool based on multi-station and time-sharing measurement [J]. Measurement, 2012, 45 (7): 1713-1722.
[22]邓玉芬, 郭俊杰, 王金栋, 等. 激光跟踪仪在重型车床几何精度检测中的应用 [J]. 西安交通大学学报, 2013, 47 (1): 74-79.
Deng Y F, Guo J J, Wang J D, et al, Laser Tracker in Geometric Precision Detection for Large Horizontal Lathe [J]. Journal of Xian Jiaotong University, 2013, 47 (1): 74-79.
[23]Zhang Z, Hu H, Measurement and compensation of geometric errors of three-axis machine tool by using laser tracker based on a sequential multilateration scheme [J]. Proceedings of the Institution of Mechanical Engin-eers, Part B: Journal of Engineering Manufacture, 2014, 228 (8): 819-831.
[24]陈洪芳, 闫昊, 石照耀. 面向特大型齿轮的激光跟踪多站位定位 [J]. 光学精密工程, 2014, 22 (9): 2375-2380.
Chen H F, Yan H, Shi Z Y. Laser tracking multi-station positioning method for Mega-gear [J]. Optics and Precision Engineering, 2014, 22 (9): 2375-2380.
[25]Muelaner J, Wang Z, Jamshidi J, et al. Verification of the indoor GPS system by comparison with points calib-rated using a network of laser tracker measurements[C]//Proceedings of the 6th CIRP-Sponsored Interna-tional Conference on Digital Enterprise Technology. Springer, Berlin, Heidelberg, 2010: 607-619.
[26]Wendt K, Franke M, Hrtig F. Measuring large 3D structures using four portable tracking laser interfer-ometers [J]. Measurement, 2012, 45 (10): 2339-2345.
[27]GB/T 12642—2013 工业机器人性能规范及其试验方法标准[S]. |