Acta Metrologica Sinica
Current Issue | Archive | Adv Search |
Automatic Calibration System of Reference Level DC Standard Voltage Source
LI Jing-jing,WANG Qian-juan,SUN Zhi,JIN Hai-bin,LUO Chun-mei,HUANG Wen-yu
Beijing Oriental Institute of Measurement and Test, Beijing 100086, China
Download: PDF (501 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract  To calibrate high precision voltage source and simplify its calibration process, based on programmed low thermal potential switch matrix, an automatic calibration system for reference DC standard voltage source was developed. The composition of the system, the development of the low thermal potential switch matrix and the calibration method of the reference level DC standard voltage source were introduced. The uncertainty of the calibration system was also evaluated with DC voltage 100V reaching 2×10-6(k=2).
Key wordsmetrology      DC standard voltage source;switch matrix;automatic calibration system;uncertainty     
PACS:  TB971  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
LI Jing-jing
WANG Qian-juan
SUN Zhi
JIN Hai-bin
LUO Chun-mei
HUANG Wen-yu
Cite this article:   
LI Jing-jing,WANG Qian-juan,SUN Zhi, et al. Automatic Calibration System of Reference Level DC Standard Voltage Source[J]. Acta Metrologica Sinica, 2020, 41(3): 306-310.
URL:  
http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2020.03.07     OR     http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2020/V41/I3/306
Copyright © Editorial Board of Acta Metrologica Sinica
Supported by:Beijing Magtech