|
|
Research on 110 GHz Traceable Multi-TRL Calibration Standard Based on On-wafer GaAs |
YUAN Si-hao1,LIU Xin-meng1,HUANG Hui2 |
1.National Institute of Metrology, Beijing 100029, China
2.Xinchen Technologies Co. Ltd, Beijing 100013, China |
|
|
Abstract To study the technique of on-wafer self-calibration, a GaAs-based Multi-TRL calibration standard kit on coplanar waveguideis is developed. It can be used for measurement system of on-wafer scattering parameters from 1 GHz to 110 GHz. The design of the calibration kitis is demonstrated and shows that good agreement with foreign commercial calibration kit and metrological calibration reference material.
|
Received: 16 May 2018
Published: 01 September 2019
|
|
|
|
|
[1]王一帮,栾鹏,吴爱华,等. 基于Multi-TRL算法的传输线特征阻抗定标[J]. 计量学报,2017,38(2):225-229.
Wang Y B,Luan P,Wu A H, et al. An Accurate Determination Method of Characteristic Impedance of Transmission Line Based on Multi-TRL Algorithms[J]. Acta Metrologica Sinica, 2017, 38(2):225-229.
[2]殷玉喆, 张旭勤, 高猛,等. GaAs衬底共面波导S参数标准样片研制[J]. 微波学报, 2017, 33(5):44-49.
Yin Y Z, Zhang X Q, Gao M, et al. Development of GaAs substrate coplanar waveguide S parameter standard prototype [J]. Journal of Microwave, 2017, 33(5):44-49.
[3]黄辉. 毫米波在片散射参数计量方法与技术研究[D]. 北京:北京理工大学,2013.
[4]Hoer C A. Choosing Line Lengths for Calibrating Network Analyzers[J]. IEEE Transactions on Microwave Theory & Techniques, 2003, 31(1):76-78.
[5]Reference Material 8130 Coplanar waveguide calibration set[R]. Report of Investigation,NIST, Gaithersburg, MD 20899 , USA, 1998.
[6]Lu H, Zhou Z, Cheng W, et al. A new on-wafer multiline thru-reflect-line (TRL) calibration standard design[C]// Antennas and Propagation,IEEE.Harbin, China,2014,934-936. |
|
|
|