[1]易军, 黄蓓. JJF 1101—2003与GB/T 5170的异同分析[J]. 电子产品可靠性与环境试验, 2014, 32(6): 21-25.
Yi J, Huang B.Similarities and Differences Between JJF 1101—2003 and GB/T 5170 [J]. Electronic Product Reliability and Environmental Testing, 2014, 32(6): 21-25.
[2]刘中华. 热真空试验标准与方法分析[J]. 电子产品可靠性与环境试验, 2016, 34(4): 16-20.
Liu Z H.Analysis of the Standards and Methods of Thermal Vacuum Test [J]. Electronic Product Reliability and Environmental Testing, 2016, 34(4): 16-20.
[3]Anderson A D, Tannehill J C, Pletcher R H. Computational fluid mechanics and heat transfer [M]. Washington DC: Hemisphere Publishing Corp, 1984.
[4]Sun P J, Wu J Y. Numerical and experiment studies of temperature field characteristic inside and irregularly-shaped cavity of a space environment simulator system [J]. Experimental Thermal and Fluid Science, 2009, 33(5): 912-921.
[5]闫格, 杨建斌, 刘强, 等. 热真空环模试验中温度参数的探讨[J]. 真空与低温, 2011, 17(1): 32-36.
Yan G, Yang J B, Liu Q, et al. The Research of The Temperature in The Thermal Vacuum Environment Simulate Test [J]. Vacuum and Cryogenics, 2011, 17(1): 32-36.
[6]黄永华, 承磊, 吴静怡, 等. 基于斯特林制冷机的氦气氛高低温箱深冷试验研究[J]. 上海交通大学学报, 2014, 48(9): 1309-1314.
Huang Y H, Cheng L, Wu J Y, et al. Experimental study on cooling performance of a thermal environment simulation chamber with helium atmosphere based on a Stirling cryogenerator [J]. Journal of Shanghai Jiaotong University, 2014, 48(9): 1309-1314.
[7]杨世铭, 陶文铨. 传热学[M]. 4版. 北京: 高等教育出版社, 2006: 395-438.
[8]戴景民, 王新北. 材料发射率测量技术及其应用[J]. 计量学报, 2007, 28(3): 232-236.
Dai J M, Wang X B.Review of Emissivity Measurement and Its Application [J]. Acta Metrologica Sinica, 2007, 28(3): 232-236.
[9]余时帆, 崔超, 王晓, 等. 固定发射率工作用辐射温度计校准方法研究[J]. 计量学报, 2017, 38(1): 40-42.
Yu S F, Cui C, Wang X, et al. The Calibration Method of Working Radiation Thermometer with Fixed Emissivity [J]. Acta Metrologica Sinica, 2017,38(1): 40-42. |