|
|
|
| A Rapid Dimensional Measuring System for Ranged Gaps on Freeform Shape |
| ZHOU Sen,XU Jian,TAO Lei,YAN Yu,JIANG Cong,ZHONG Hua |
| Chongqing Academy of Metrology and Quality Inspection, Chongqing 401121, China |
|
|
|
|
Abstract According to 3D geometric characters of ranged gaps on freeform shape, a novel rapid dimensional measuring system integrating laser scanning technologies and virtual measuring environments was developed. Based on the geometric information of acquired feature points of measured gap, the view angle and scanning depth of laser scanner can be determined step by step, thus automated generating an effective sampling path. Then, the positions of feature points have been identified and located by the respect of their absolute difference in the finding direction. In the global coordinate, the shape of measured ranged gaps was constructed by critical feature points set based on non-linear least-square method and the geometric dimensional can be also real-time obtained. The experiments on special gap artifact (200 mm×50 mm×32 mm) with freeform curve and multi-scale features were carried out to determine the accuracy and reliability of measuring system, the experimental results indicate that the dimension of gap artifact, including width, depth and flush, were perfectly measured in only 60s with the resolution less than 0.005mm and the measuring precision over 0.025mm. According to the actual operation results, the proposed measuring system is characterized by high automation and high efficiency, and can be well acceptable for application as online dimensional inspection for range gap on freeform shape on the automobile or aerospace production line.
|
|
|
|
|
|
|
|
［1］Brosed F J, Aguilar, J J,Guillomía D, et al. 3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot［J］. Sensor, 2011, 11(1): 90-110.
［2］Kosmopoulos D, Varvarigou T. Automated inspection of gaps on the automobile production line through stereo vision and specular reflection［J］. Computer In Industry, 2001, 46(1): 49-63.
［3］康岩辉, 张恒, 李颖仲. 基于多电容传感大型主轴圆度的精密测量［J］. 计量学报, 2012, 33(6): 490-494.
［4］刘庆民, 张蕾, 吴立群, 等. 基于机器视觉的非均匀分布点圆度误差评定［J］. 计量学报, 2016, 37(6): 490-494.
［5］裘祖荣, 石照耀, 李岩. 机械制造领域测量技术的发展研究［J］. 机械工程学报, 2010, 46(14): 1-11.
［6］周森, 郭永彩, 高潮, 等. 基于三维激光扫描的移动大尺寸圆柱体工件长度快速检测系统［J］. 光学精密工程, 2014, 22(6): 1524-1530.
［7］卢荣胜, 吴昂, 张腾达,等. 自动光学(视觉)检测技术及其在缺陷检测中的应用综述［J］. 光学学报, 2018, 38(8): 0815002.
［8］程银宝, 陈晓怀,王汉斌,等. CMM尺寸测量的不确定度评定模型研究［J］. 计量学报, 2016, 37(5): 462-467.
［9］尹仕斌, 任永杰,刘涛,等. 机器视觉技术在现代汽车制造中的应用综述［J］. 光学学报, 2018, 38(8): 0805101.
［10］Son S, Park H, Lee K H. Automated laser scanning system for reverse engineering and inspection［J］. International Journal of Machine Tools, 2002, 42(8): 889-897.
［11］Gerbino S, Giudice D M D, Staiano G, et al. On the influence of scanning factors on the laser scanner-based 3D inspection process［J］. International Journal of Advanced Manufacture Technology, 2016, 84(9-12): 1787-1799. |
|
|
|
2018, Vol. 39 
