[1]Afkhami B, Akbarian B, Beheshti A N, et al. Energy consumption assessment in a cement production plant[J]. Sustainable Energy Technologies and Assessments, 2015, 10:84-89.
[2]卢小丰, 原遵东, 董伟, 等. 应用高温固定点校准精密光电高温计[J]. 计量学报, 2017, 38(5): 584-588.
Lu X F, Yuan Z D, Dong W, et al. Calibrating pyrometers with high temperature fixed points[J]. Acta Metrologica Sinca, 2017,38(5):584-588.
[3]王烨, 杨立. 高温管道内流体流量及温度识别研究[J]. 计量学报, 2017,38(4): 477-480.
Wang Y, Yang L. Research on identification of flow rate and temperature in the high temperature pipeline[J]. Acta Metrologica Sinca,2017,38(4): 477-480.
[4]Locher G, Klein H. Mathematical models for the cement clinker burning process, Part4. Grate cooler[J]. ZKG-International,2002,22(6):46-57.
[5]Touil D, Belabed H F, Frances C, et al. Heat exchange modeling of a grate clinker cooler and entropy production analysis[J]. International Journal of Heat and Technology, 2005,23(1):61-68.
[6]Mujumdar K S, Ganesh K V, Kulkarni S B, et al. Rotary cement kiln simulator (RoCKS): Integrated modeling of pre-heater, calciner, kiln and clinker cooler[J]. Chemical Engineering Science, 2007,62(9):2590-2607.
[7]冯绍航, 徐德龙, 李辉, 等. 篦冷机中气固两相换热过程的模拟研究[J]. 西安建筑科技大学学报, 2007,39(2):224-234.
Feng S H, Xu D L, Li H, et al. Simulation study on heat transfer between clinker and gas of the grate cooler[J]. Journal of Xian University of Architecture and Technology, 2007,39(2):224-234.
[8]刘彬, 郝晓辰. 篦冷机熟料多通道冷却气固热交换模型研究[J]. 硅酸盐通报, 2008, 27(2): 247-253.
Liu B, Hao X C. Research on gas-solid heat exchange model of clinker grate cooler[J]. Bulletin of the Chinese Ceramic Society,2008,27(2):247-253.
[9]刘彬,刘永记,刘浩然,等. 基于改进遗传爬山算法的篦冷机熟料换热二次风温故障诊断[J]. 计量学报, 2018,39(5):651-658.
Liu B, Liu Y J, Liu H R, et al. Fault Diagnosis of Secondary Air Temperature of Grate Cooler Cement
Clinker Heat Transfer Based on Improved Genetic Hill Climbing Algorithm[J]. Acta Metrologica Sinica, 2018,39(5):651-658.
[10]郑坤灿, 温治, 刘训良, 等. 高温散料气-固换热过程通用数学模型的研究[J]. 冶金能源,2010,29(2):27-30.
Zheng K C, Wen Z, Liu X L, et al. Investigating the general mathematics model of gas-solid heat transfer in the cooling process of high temperature clinker and sintered material[J]. Energy for Metallurgical Industry,2010,29(2):27-30.
[11]闻岩, 王佳顺, 岳海龙, 等. 篦冷机熟料多孔介质直管等效换热模型[J]. 化工学报,2014,65(9):3434-3440.
Wen Y, Wang J S, Yue H L, et al. Equivalent straight pipe heat transfer model of cement clinker porous media in grate cooler[J]. Journal of Chemical Industry and Engineering,2014, 65(9):3434-3440.
[12]尹洪超, 朱元师, 李德付. 基于耦合气固传热篦冷机的数值模拟与研究[J]. 热科学与技术,2012,11(3):229-233.
Yin H C, Zhu Y S, Li D F. Numerical simulation and study of clinker cooler based on coupling of gas-solid heat transfer[J]. Journal of Thermal Science and Technology,2012,11(3):229-233.
[13]Wang M Q, Liu B, Wen Y, et al. Seepage Heat Transfer Between Clinker and Cooling Air with Variable Properties in Grate Cooler[J].Heat Transfer Research,2017,48(3): 263-281.
[14]罗峰, 欧阳小龙, 高诚,等. 空气与高温烧结水泥颗粒球间气固换热规律研究[J]. 工程热物理学报,2012, 33(9):1580-1584.
Luo F, Ouyang X L, Gao C, et al. Investigation on heat transfer between air and sintered cement ball of high temperature[J]. Journal of Engineering Thermophysics,2012,33(9):1580-1584.
[15]Mukhopadhyay S, Layek G C. Effects of thermal radiation and variable fluid viscosity on free convective flow and heat transfer past a porous stretching surface[J]. International Journal of Heat and Mass Transfer,2008,51:2167-2178.
[16]Magyari E, Pantokratoras A. Note on the effect of thermal radiation in the linearized Rosseland approximation on the heat transfer characteristics of various boundary layer flows[J]. International Communications in Heat and Mass Transfer, 2011,38: 554-556.
[17]闻岩, 李斌, 王佳顺, 等. 水泥熟料堆积体等效导热系数模型与实验研究[J]. 硅酸盐通报, 2014,33(7):1589-1593.
Wen Y, Li B, Wang J S, et al. Model and experimental study of equivalent thermal conductivity for cement clinker accumulation body[J].Bulletin of the Chinese Ceramic Society,2014, 33(7):1589-1593.
[18]孔祥言. 高等渗流力学[M]. 合肥: 中国科学技术大学出版社, 1999: 22-23.
[19]Dehghan M, Valipour M S, Keshmiri A, et al. On the thermally developing forced convection through a porous material under the local thermal non-equilibrium condition: an analytical study[J]. International Journal of Heat and Mass Transfer,2016,92:815-823.
[20]冯绍航. 篦式冷却机的换热理论研究[D]. 西安: 西安建筑科技大学,2004.
[21]胡道和, 徐德龙, 蔡玉良. 气固过程工程学及其在水泥工业中的应用[M]. 武汉: 武汉理工大学出版社,2003:132-133.
[22]姜培学, 司广树, 任泽霈. 粘性耗散及变物性对多孔介质中对流换热的影响研究[J]. 工程热物理学报,2000,21(5):590-594.
Jiang P X, Si G S, Ren Z P. Numerical investigation on the effects of viscous dissipation and variable thermophysical properties on forced convection heat transfer in porous media[J]. Journal of Engineering Thermophysics,2000,21(5):590-594.
[23]屠传经, 沈珞婵, 胡亚才. 高温传热学[M]. 杭州:浙江大学出版社,1997:20-21. |