| ［1］梁志国,张大治,吕华溢.动态校准、动态测试与动态测量的辨析［J］.计测技术,2017,37(1):30-34.
Liang Z G, Zhang D Z, Lv H Y. Discussion on Dynamic Calibration, Dynamic Test and Dynamic Measurement［J］. Metrology & Measurement Technology, 2017, 37(1):30-34.
［2］梁志国,曹英杰,孙璟宇,等.飞机地面测试试验系统综合校准述评［J］.航空计测技术,2001,21(5):7-9.
Liang Z G, Cao Y J, Sun J Y, et al. Review about the Overall Calibration of Ground Measuring and Testing System of Aircraft［J］. Metrology & Measurement Technology, 2001, 21(5):7-9.
［3］王魁汉.在线原位校准——测温系统校准的新理念［J］.计量学报,2012,33 (z2):62-65.
Wang K H. On-line Calibration in Original Position-A New Concept of the Calibration Method in Temperature Measurement System［J］. Acta Metrologica Sinica, 2012, 33 (z2): 61-65.
［4］王一,刘常杰,杨学友,等.工业机器人视觉测量系统的在线校准技术［J］.机器人,2011,33 (3):299-302.
Wang Y, Liu C J, Yang X Y, et al. Online Calibration of Visual Measurement System Based on Industrial Robot［J］. Robot, 2011,33 (3) :299-302.
［5］李长武,张东飞,袁明,等.液体流量仪表在线校准方法研究［J］.中国测试,2009,35 (5):27-29.
Li C W, Zhang D F, Yuan M, et al. Study of online calibration method for liquid flowmeter［J］. China Measurement & Test, 2009, 35 (5) :27-29.
［6］王锋,陈凯,陈小平.一种含间隙机械臂的在线校准方法［J］.机器人,2013,35 (5):521-526.
Wang F, Chen K, Chen X P. An Online Calibration Method for Manipulator with Joint Clearance［J］. Robot, 2013,35 (5) :521-526.
［7］章述汉,雷民,熊前柱,等.电力互感器在线校准用数据采集装置的研制［J］.电测与仪表,2012,49 (12):82-85.
Zhang S H, Lei M, Xiong Q Z, et al. Development of Data Acquisition Device Used for Power Transformer on-line Calibration［J］. Electrical Measurement & Instrumentation, 2012,49 (12) :82-85
.
［8］周小敏,于坤.传感器在线校准系统［J］.电测与仪表,1993, 30(9):45-46.
Zhou X M, Yu K. On-line calibration system for sensors［J］. Electrical Measurement & Instrumentation, 1993,30 (9) :45-46
.
［9］陆佳艳,劳嫦娟,瞿剑苏,等.舰船模型水上试验测速系统的在线校准［J］.计量学报,2014,35 (z1):99-103.
Lu J Y, Lao C J, Qv J S, et al.The Online Calibration of Velocity-measuring System in Ship Model Water-based Test［J］. Acta Metrologica Sinica, 2014 (z1) : 99-103.
.
［10］许乔奇,姬忠礼,刘刚,等.高压天然气管道内颗粒物在线检测结果校正方法［J］.过程工程学报,2012,12 (5): 870-875.
Xu Q Q, Ji Z L, Liu G, et al. Experimental Research on Online Determination Technology of Particles in High Pressure Natural Gas Pipeline［J］. The Chinese Journal of Process Engineering, 2012,12 (5) : 870-875
.
［11］黄家才,陶建武,温秀兰.电磁矢量传感器原位误差校正方法［J］.电子学报,2009,37 (2): 351-356.
Huang J C, Tao J W, Wen X L. Calibration Algorithm Against Orientation Errors of Electromagnetic Vector Sensors［J］. Acta Electronica Sinica, 2009,37 (2) : 351-356
.
［12］吴行章,张龙发,蒋世奇,等.发动机燃油流量现场校准装置［J］.燃气涡轮试验与研究,1999,12(3):48-51.
Wu X Z, Zhang L F, Jaing S Q, et al. The in -situ calibration unit of fuel flow rate of engine［J］. Gas Turbine Experiment and Research, 1999 (3) :48-51
.
［13］姜昆,梁廷伟,董海峰.直升机发动机扭矩测控系统现场校准装置［J］.计测技术,2006,26 (4):17-18.
Jiang K, Liang T W, Dong H F. The Field Verifying Unit of Torque Measuring and Control System for Helicopter Engine［J］. Metrology & Measurement Technology, 2006,26 (4) :17-18
.
［14］赵涌,侯敏杰,陈冕,等.航空发动机高空模拟试验燃油流量原位校准系统设计与检验［J］.燃气涡轮试验与研究,2013,26(1):5-8.
Zhao Y, Hou M J, Chen M, et al. Design and Verification of an In-Situ Calibration System for Aero-Engine Fuel Flow Rate Measurement in Altitude Simulation Test［J］. Gas Turbine Experiment and Research, 2013,26(1) :5-8
.
［15］赵自文,徐毓雄,严宜强.空空导弹地面检测设备校准方法研究［J］.中国测试,2017, (12):63-68.
Zhao Z W, Xu Y X, Yan Y Q, et al. Research on calibration method for ground test equipment of airborne missile［J］. China Measurement & Testing Technology, 2017, (12) :63-68
.
［16］朱青,徐建阳.CS-01高空台推力测量和校准装置研制［J］.燃气涡轮试验与研究,2002,15 (3):38-42.
Zhu Q, Xu J Y. Development of Thrust Measurement and Calibration System in a High Altitude Test Facility［J］. Gas Turbine Experiment and Research, 2002,15 (3) :38-42
.
［17］吴惠明,焦献瑞.发动机试车台推力测量系统中心加载现场校准技术研究［J］.计测技术,2009,29 (1):28-30.
Wu H M, Jiao X R. Study of In-situ Calibration Technology of Test Cell Thrust Force Measuring System［J］. Metrology & Measurement Technology, 2009,29 (1) :28-30
.
［18］张广军,黄俊钦.热敏传感器现场动态校准方法初探［J］.中国测试,1993, (4):10-11.
Zhang G J, Huang J Q. research on in-situ dynamic calibration method of foment sensors［J］. Metrology and measurement, 1993, (4) :10-11
.
［19］张广军,黄俊钦,李行善,等.温度传感器现场动态校准方法与实验研究［J］.北京航空航天大学学报,1997, (3): 311-315.
Zhang G J, Huang J Q, Li X S, et al. Spot calibration method for dynamic performance of temperature transducers and its experimental study［J］. Journal of Beijing University of Aeronautics and Astronautics, 1997, (3) : 311-315
.
［20］习振华,李得天,成永军,等.现场真空校准装置性能研究［J］.真空科学与技术学报,2016,36 (12): 1400-1406.
Xi Z H, Li D T, Cheng Y J, et al. Portable Ultra High Vacuum Apparatus for Field Calibration of Low Pressure System［J］. Chinese Journal of Vacuum Science and Technology, 2016,36 (12) : 1400-1406
.
［21］汪静,欧阳红军,蒋薇.ATE可计量性信息流建模与分析研究［J］.仪器仪表学报,2012,33 (11): 2503-2508.
Wang J, Ouyang H J, Jiang W. Study on information flow modeling and analysis of ATE measurability, Chinese Journal of Scientific Instrument［J］. Chinese Journal of Scientific Instrument,2012,33 (11) : 2503-2508
.
［22］蒋薇,张玘,汪静.装备可计量性的相关性模型研究与分析［J］.电子测量与仪器学报,2012,26 (4): 299-304.
Jiang W, Zhang Q, Wang J. Dependency model research and analysis of equipment measurability［J］. Journal of Electronic Measurement and Instrument, 2012,26 (4) : 299-304
.
［23］梁志国,张大治.复杂系统的计量性设计与评估［J］.计测技术,2017,37 (5): 1-6.
Liang Z G, Zhang D Z. Design and Evaluation of the Measure Ability of Complex Products［J］. Metrology & Measurement Technology, 2017,37 (5) : 1-6
.
［24］刘民,曾令儒,蒋方亮.远程计量校准研究［J］.电子测量与仪器学报,2005,19 (3): 1-4.
Liu M, Zeng L R, Jiang F L. Study of Tele-calibration［J］. Journal of Electronic Measurement and Instrument, 2005,19 (3) : 1-4
.
［25］梁志国,孟晓风.数据采集系统的远程校准［J］.测试技术学报,2009,23(6):526-529.
Liang Z G, Meng X F. Discussion on the Remote Calibration of Data Acquisition Systems［J］. Journal of Test and Measurement Technology, 2009,23(6):526-529.
［26］国防科工委科技与质量司.热学计量［M］. 北京:原子能出版社,2002:20-26. |
2019, Vol. 40 
