Abstract A computing method based on plane geometry which is used to calculate the isotropy of E-field probe is purposed. And the generality and reasonability of the method have been proved through theoretical deduction and experiment validation. Based on the experimental results, it shows that the results difference between the new method and the one used in Standard IEEE-1309 is 0.01~0.08 dB. But through comparison of the new method to the one used in IEEE-1309, it shows that the method can not only evaluate the isotropy of E-field probe but also can have positive effects on the improvement of isotropy of E-field probe at the same time.
XIONG Yu-fei,ZHOU Feng,LIU Jian-zhe. A Computing Method for Isotropy of E-field Probe Based on Plane Geometry[J]. Acta Metrologica Sinica, 2018, 39(4): 559-561.
［1］谢鸣,王维龙,黄攀,等. 10 MHz ～ 1 GHz 电场探头校准系统［J］. 安全与电磁兼容, 2007,(5) : 23-27.
［2］郭启勇,梁琼崇,骆德汉,等. 基于TEM小室的电场探头校准［J］. 广东工业大学学报,2016,33(3):19-25.
［3］刘潇,李渤,谢鸣. 基于TEM小室的探头校准系统不确定度评定［J］. 计量学报, 2015,36(3): 318-323.
［4］谢鸣,孟东林,黄攀,等. 1~18 GHz功率通量密度标准研究［J］. 计量学报,2009, 30（4）:354-357.
［5］Wang H,Zhong C. Compensation method for the coupling error between the EUT and TEM cell in E-field probe isotropic calibration［C］// Proceedings of 2015 IEEE International Symposium on Electromagnetic Compatibility (EMC),2015,USA:2015.
［6］孟东林,吴钒,王维龙. NIM球面近场法天线校准装置的测量不确定度评定［J］. 计量学报,2017,38(6): 758-762.
［7］IEEE-1309. IEEE Standard for Calibration of Electromagnetic Field Sensors and Probes (Excluding Antennas) from 9 kHz to 40 GHz［S］.2013.
［8］周峰,王景伟,熊宇飞,等.IEEE STD 1309—2013电场校准标准的公式与计算讨论［J］. 计量学报,2017,38(6): 763-764.
2018, Vol. 39 
