|
|
Research on Calibration Method of Cable Analyzer in Far-end Attenuation-to-Crosstalk Ratio Parameter |
CHEN Long-quan,XU Wei,HUANG Zhen,ZHANG Ying-yan |
Telecom Technology Lab, China Academy of Telecommunication Research, Ministry of Industry and Information Technology, Beijing 100191, China |
|
|
Abstract Far-end attenuation-to-crosstalk ratio (ACR-F) is the primary parameter of digital balanced cable, also the essential test item in cable analyzer. Have proposed a calibration method on ACR-F of cable analyzer, which utilize network analyzer (NA) and impedance converter to measure insertion loss (IL) and far-end crosstalk (FEXT) in reference cable separately, and acquire the derived results. And the calibration method of ACR-F is direct comparison between the NA and cable analyzer on the reference cable. The method is confirmed through comparison with Psiber Wirexpert series cable analyzer, and extended uncertainty is also listed.
|
Received: 12 March 2017
Published: 12 April 2018
|
|
|
|
|
[1]Stelcner M. Structured cabling for intelligent buildings[C]//Conf Proc Intelligent Buildings: Realising the Benefits. BRE, 1998.
[2]YD/T 926.3—2009 大楼通信综合布线系统 第3部分:连接硬件和接插软线技术要求[S]. 2009.
[3]IEC 61935-1 Specification for the Testing of Balanced and Coaxial Information Technology Cabling—Part 1: Installed Balanced Cabling as Specified in ISO/IEC 11801 and Related Standards, Edition 3[S].2009.
[4]Sellone M, Oberto L, Shan Y, et al. Comparison of S-Parameter measurements at millimeter wavelengths between INRIM and NMC[J]. IEEE Transactions on Instrumentation & Measure, 2014, 63(7):1810-1817.
[5]李胜海, 杨桥新. 网络线缆分析仪近端串扰的校准研究[J]. 电子产品可靠性与环境试验, 2011, 29(5): 54-57.
[6]赵才军,蒋全兴,何鹏,等. 一种使用矢量网络分析仪的阻抗测量改进方法[J]. 计量学报,2010,31(2): 160-164.
[7]Meng Y S, Patel A C,Shan Y, et al. Performance evaluation of a handheld network analyzer for testing of balanced twisted-pair copper cabling[C]// Conference on Precision Electromagnetic Measurements (CPEM 2014), 2014:348-349.
[8]刘晨,吴爱华,孙静,等. 宽带在片SOLT校准件研制及表征[J]. 计量学报,2017,38(1): 98-101. |
|
|
|