|
|
Method of Deformation Measurement for Vertical Tank Based on 3D Laser Scanning Method for Production Safety Oil Depot |
WANG Jin-tao,LIU Xiang,TONG Lin,LIU Zi-yong,BAO Xue-song |
National Institute of Metrology, Beijing 100029, China |
|
|
Abstract In view of the quality and improper operation of the vertical tank, the deformation of the vertical metal storage tank will affect the normal operation and safe operation of the tank and the accuracy of volume measurement. Application of 3D modeling technology of laser scanning, a new method for deformation measurement of large vertical metal tank analysis based on point cloud data is studied and calculated by the iterative algorithm of geometry radius of each plate. High accuracy of the vertical tank plate model was obtained using the geometric radius calculated. The wall deformation measurement platform is used to measure the deformation parameters of the local area, and the synchronous measurement of the whole and local deformation of the vertical tank plate is realized. A 10104m3 vertical floating roof tank (diameter 79.937m) is used as the experimental study, which verified the effectiveness of this method.
|
Received: 13 December 2017
Published: 11 February 2018
|
|
Corresponding Authors:
Jintao Wang
E-mail: wangjt@nim.ac.cn
|
|
|
|
[1]廉育英. 容量计量技术[M]. 北京:北京计量出版社,2006:10-18.
[2]廉育英, 刘子勇, 何力, 等. 立式金属计量罐大容量的新测量方法[J]. 计量学报,1988, 9(4):241-247.
[3]国家质量监督检验检疫总局. JJG 168-2005 立式金属罐容量[S].2005:2-10.
[4]ISO7507-1. Petroleum and liquid petroleum products-volumetic calibration of vertical cylindrical tanks[S]. 2003: 6-11.
[5]吴斌,丁文,杨峰亭,等. 非正交轴系全站仪坐标测量系统误差分析技术研究[J]. 计量学报, 2017,38(6):661-666.
[6]ISO7507-2. Petroleum and liquid petroleum products volumetric calibration of vertical cylindrical tanks part2: optical reference line method[S].2003:6-16.
[7]ISO7505-3 . Petroleum and liquid prtroleum products volumetric calibration of vertical cylindrical tanks part3: optical triangulation method[S].2006:1-7.
[8]刘鎏, 刘丽川, 周玉君, 等.一种基于余弦定理罐壁变形测量的新方法[J]. 后勤工程学院学报, 2010, 26(2):29-32.
[9]佟仕忠,谢植,尹薇薇,等. 立式金属罐浮顶与罐底检定方法的研究[J]. 计量学报, 2011, 32(5): 446-449.
[10]Richard M.S. Calibration of storage tanks[C]// Proceedings of the Internation School of Hydrocarbon Measurement, 1985:428-432.
[11]徐忠阳, 张良琚, 魏进祥. 基于徕卡TCR系列全站仪的立式油罐容量标定测量系统[J]. 测绘信息与工程, 2002,27(4):1-2.
[12]刘江, 巩晓晴, 李积云. 逆向工程中多视点云对齐方法研究[J]. 工程图学学报, 2009, 30(6):170-173. |
|
|
|