|
|
Detecting Roundness Error Based on Quantum Genetic Algorithm |
SHEN Cui-xiang1,ZHANG Xiao-yu2 |
1.Sanmenxia Health School, Sanmenxia, Henan 472143, China
2.Henan CATV Group Sanmenxia Branch, Sanmenxia, Henan 472143, China |
|
|
Abstract In order to improve the roundness measurement accuracy, quantum genetic algorithm was proposed. Firstly, the center coordinates and the radius of the roundness image of the modeling data were established using the least square fitting. Secondly, unacceptable roundness data were rejected in the roundness calculation. Thirdly, multi-bit coding was completed using quantum genetic algorithm, and quantum revolving gate non-fixed step size adjustment and updating were implemented. Finally, the procedure for measuring the roundness error was presented. Simulation results indicated that the proposed algorithm produces accurate measurements, and when compared with the three-coordinate measuring machine, the error is within 0.0058mm, and the relative error of radius is within -0.19%, the maximum measurement errors all being within 0.01%.Further, the maximum error fluctuation is stable, and relative to other methods, the measurement uncertainty is lower.
|
Received: 30 December 2016
Published: 11 February 2018
|
|
|
|
|
[1]王东霞,宋爱国,温秀兰. 微分进化算法在圆度误差评定中的应用[J].计量学报,2015, 36(2): 123-127.
[2]吴新杰,王苗苗,黄国兴.基于粒子滤波和机器视觉的圆形零件尺寸测量[J].机械设计与制造,2012,(11):49-51.
[3]宋康,廖俊必, 林长青,等.圆度仪的调平和圆柱度误差评定[J].光学精密工程,2014,22(12):3360-3367.
[4]de Souza G B, Marana A N.HTS and HTSn: New shape descriptors based on Hough transform statistics[J].Computer Vision and Image Understanding,2014,127(10):43–56.
[5]杨俊超,于大国,徐文凯,等.一孔截面测算多圆心法检测深孔轴线直线度[J].科学技术与工程,2015,15(34):172-176.
[6]李帆,周芬芬,李兴林,等.精密轴承钢球圆度测量误差分离技术研究现状[J].轴承,2015,(6):50-55.
[7]周勇亮,金燕,何萍,等.随机Hough变换圆检测累计加速算法[J].计算机辅助设计与图形学学报,2014,26(4): 574-580.
[8]龚立雄,黄敏.基于改进Hough变换的圆形零件尺寸测量研究[J].现代制造工程,2014,(2):98-102.
[9]王健全,田欣利,张保国,等.微纳尺寸零件曲率半径测量方法[J].解放军理工大学学报(自然科学版),2014,15(1):56-61.
[10]刘长青,李军,席巍.基于机器视觉的零件在线分选系统研究[J].数字技术与应用,2012,(4):71-73.
[11]刘庆民,张蕾,吴立群,等.基于机器视觉的非均匀分布点圆度误差评定[J].计量学报,2016, 37(6): 567-570.
[12]沈微微,华明正,史洪玮.一种基于高校排课问题的新型量子遗传进化算法[J].现代电子技术,2013,36(20):7-10.
[13]张磊,方洋旺,毛东辉,等.一种新的相位角编码量子进化算法[J].控制与决策,2015,30(4):739-744. |
|
|
|