Acta Metrologica Sinica  2018, Vol. 39 Issue (1): 66-71    DOI: 10.3969/j.issn.1000-1158.2018.01.15
Current Issue | Archive | Adv Search |
Analyses of Measurement Errors of Shear Bands with Constant Strains Based on the One-and Two-order DIC Methods
DU Ya-zhi1,WANG Xue-bin1,2,DONG Wei1,FENG Wei-wu1,HOU Wen-teng1
1. College of Mechanics and Engineering, Liaoning Technical University, Fuxin, Liaoning 123000, China
2. Institute of Computational Mechanics, Liaoning Technical University, Fuxin, Liaoning 123000, China
Download: PDF (2698 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract  The horizontal and oblique shear band with constant strains are produced, using the digital image correlation (DIC) method, the displacement field and strain field of the inside and outside the shear band were measured, the influences of the shape function, subset size and spacing of points on displacement were analyzed. The results showed that the displacement error limits of the one-or two-order DIC methods are high nearby the boundary of a shear band, because a subset covers a part of a shear band. The larger the subset size is or the shorter the distance from the subset center to the boundary of a shear band is, the higher the displacement error limit is. Usually, the displacement error limits of the two-order DIC method are much lower than those of the one-order DIC method nearby the boundary of a shear band. With the increase of the spacing of points, the shear strain-coordinate curves of the shear band in the normal direction of one- or two-order DIC methods change from steep to gentle, and widths of shear bands increase.
Key wordsmetrology      shear band      digital image correlation method      shape function      measurement error     
Received: 11 July 2016      Published: 29 December 2017
PACS:  TB931  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
DU Ya-zhi
WANG Xue-bin
DONG Wei
FENG Wei-wu
HOU Wen-teng
Cite this article:   
DU Ya-zhi,WANG Xue-bin,DONG Wei, et al. Analyses of Measurement Errors of Shear Bands with Constant Strains Based on the One-and Two-order DIC Methods[J]. Acta Metrologica Sinica, 2018, 39(1): 66-71.
URL:  
http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2018.01.15     OR     http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2018/V39/I1/66
Copyright © Editorial Board of Acta Metrologica Sinica
Supported by:Beijing Magtech