|
|
Study on the Influence of Ambient Pressure on Liquid Density Transmission |
ZHANG Jing-yue1,2,WANG Jin-tao1,SHI Wen-cai1,LIU Xiang1,LI Zhan-hong1,TONG Lin1,MA Xin-yu1,2 |
1. National Institute of Metrology, Beijing 100029, China
2. China Jiliang University, Hangzhou, Zhejiang 310018, China |
|
|
Abstract As an important part of density standards, liquid density standard plays a significant role in quantity transfer and traceability. In order to correct the influence of pressure, a method is proposed to measure the compressibilities of density standard liquids at low pressure. The relationship between the density of liquid and pressure is established by a calibration measuring which device of pure water and air standard density. Compressibilities of density standard liquids were measured by vibrating-tube densimeter calibrated. According to the result, the relative change is about 1×10-6 in the density of the liquid caused by the elevation of 100 m, which verified the necessity of the correction.
|
Received: 27 October 2017
Published: 11 February 2018
|
|
Corresponding Authors:
Jintao Wang
E-mail: wangjt@nim.ac.cn
|
|
|
|
[1]Fujii K. Present state of the solid and liquid density standards [J]. Metrologia, 2004, 41:S1-S15.
[2]Fujii K. Precision density measurements of solid materials by hydrostatic weighing [J]. Measurement Science & Technology, 2006, 17(10):2551-2559.
[3]Bettin H, Toth H. Solid density determination by the pressure-of-flotation method [J]. Measurement Science & Technology, 2006, 17(10):2567-2573.
[4]Fehlauer H, Wolf H. Density reference liquids certified by the Physikalisch-Technische Bundesanstalt [J]. Measurement Science & Technology, 2006, 17(10):2588-2592.
[5]罗志勇, 杨丽峰, 陈允昌. 基于多光束干涉原理的相移算法研究[J]. 物理学报, 2005, 54(7): 3051-3057.
[6]罗志勇. 单晶硅球密度的绝对测量[J]. 计量学报, 2012, 33(5):428-431.
[7]王金涛, 刘子勇. 基于静力悬浮原理的单晶硅球间微量密度差异精密测量方法研究[J]. 物理学报, 2013, 62(3): 374-381.
[8]WANG J T, LIU Z Y, XU C H, et al. Measurement method of compressibility and thermal expansion coefficients for density standard liquid at 2329 kg/m3 based on hydrostatic suspension principle [J]. Chinese Journal of Mechanical Engineering, 2014, 27(4):779-784.
[9]崔英伟, 孙坤, 刘振兴. 油液体积弹性模量的测量[J]. 液压气动与密封, 2012, 32(3):17-19.
[10]Pena M D, Tardajos G. Isothermal compressibilities of n-alkanes and benzene [J]. Journal of Chemical Thermodynamics, 1978, 10(1): 19-24.
[11]Picard A, Davis R S, Glser M, et al. Revised formula for the density of moist air (CIPM-2007)[J]. Metrologia, 2008, 45(2):149-155.
[12]Sanmamed Y A, Dopazo-Paz A, González-Salgado D, et al. An accurate calibration method for high pressure vibrating tube densimeters in the density interval (700 to 1600) kg· m 3[J]. Journal of Chemical Thermodynamics, 2009, 41(9):1060-1068.
[13]YIN J, WU J, MENG X, et al. Compressed liquid density measurements of dimethyl ether with a vibrating tube densimeter [J]. Journal of Chemical Thermodynamics. 2011, 43(9):1371-1374.
[14]Tanaka M, Girard G, Davis R, et al. Recommended table for the density of water between 0 °C and 40 °C based on recent experimental reports[J]. Metrologia, 2001, 38(4):301-309.
[15]文晓林, 何家骏. 二组分系统的压缩系数和热压力系数[J]. 物理化学学报, 1992, 8(6): 804-808.
[16]李之昊, 王金涛, 刘翔, 等. 基于Karl Fischer电位滴定原理的超微量液体容积精密测量方法[J]. 计量学报, 2017, 38(3): 296-299.
[17]Aicart E, Tardajos G, Pea M D. Isothermal compressibility of cyclohexane + n-tridecane and + n-pentadecane at 298.15, 308.15, 318.15, and 333.15 K[J]. Journal of Chemical Thermodynamics, 1981, 13(8):783-788.
[18]Fehlauer H, Wolf H. Density reference liquids certified by the Physikalisch-Technische Bundesanstalt[J]. Measurement Science & Technology, 2006, 17(10):2588-2592. |
|
|
|