|
|
Calibrate of Ultra-low Frequency Acceleration by Mathematical Pendulum-vibration Generator Method |
HE Yi-cai,LIAO Jian-ping,ZHAO Jun-zhe |
Changcheng Institute of Metrology & Measurement, Beijing 100095, China |
|
|
Abstract The calibration device of ultra-low frequency acceleration is established based on the mathematical pendulum-vibration generator. According to theory of low frequency noise, based on the spectral density function of laser interferometer, the method of quantitative evaluation for displacement noise is proposed. The validity of the proposed method is identified by experiment. The virtual pendulum-arm and excitation-transfer coefficient of mathematical pendulum-vibration generator is measured experimentally, the measurement uncertainty of the calibration device is evaluated. The accelerometers calibration of absolute method is realized, which is established in 0.001~0.1Hz frequency range, 5×10-7 ~0.01m/s2 acceleration range.
|
Received: 10 February 2017
Published: 16 June 2017
|
|
|
|
|
[1]于梅, 何闻, 刘爱东, 等. 超低频振动国家计量基准装置的研究与建立[J].计量学报, 2011, 32(2):97-100.
[2]von Martens H J, Link A, Schlaak H J,et al.Recent advance in vibration and shock measurements and calibrations using laser interferometry[J].Proceedings of SPIE - The International Society for Optical Engineering, 2005, 5503:1-15.
[3]胡红波, 于梅. 低频振动台激励系统负反馈控制的研究与应用[J]. 计量学报, 2010, 31(6):513-516.
[4]刘爱东, 于梅. 振动自动校准系统的研究与实现[J]. 计量学报, 2009, 30(2):141-143.
[5]陈群. 长行程超低频水平向电磁振动台中关键技术问题的研究[D]. 杭州:浙江大学, 2013.
[6]杨巧玉, 舒毓龙. 低频标准振动台技术指标测试方法探讨[J]. 世界地震工程, 2008, 24(2):97-101.
[7]高晋占. 微弱信号检测[M]. 北京:清华大学出版社, 2004.
[8]于梅, 孙桥, 冯源, 等. 正弦逼近法振动传感器幅相特性测量技术的研究[J]. 计量学报, 2004, 25(4):344-348.
[9]ISO 16063-11 Methods for the calibration of vibration and shock transducers-Part 11:Primary vibration calibration by laser interferometry(third edition)[S]. |
|
|
|