基于XGBoost模型的多缺陷点阵结构性能参数预测方法

doi:10.3969/j.issn.1000-1158.2024.04.15

Abstract
Figure/Table
References (19)
Related Citation (5)

Download: PDF (8000 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To address the problem that the diversity and randomness of defects in additively manufactured metal lattice structures make it difficult to accurately predict their mechanical properties, a model for predicting the yield stress of lattice structures based on the parameter optimization XGBoost model was proposed. Based on CT test data, a threshold judgement criterion was proposed for the rapid detection and classification of multiple defects. Focusing on the problems of strut diameter size and angular deviation defects, the number of defects dominated by oversized struts, undersized struts, and waviness struts were used as input features of the model, respectively. The number of layers was used as another input feature, considering the randomness of defect locations. Based on the measured data, a simulation model of the defect-containing lattice structure was established, and its yield stress was simulated. Using the parameter optimization method to optimize the prediction model hyperparameters and combining the results of the yield stress simulation, the prediction of the yield stress of the structural member is achieved with an R2 of 0.81 and an RMSE of 18.87. A comparison between the prediction results and the actual sample test results was provided in the experimental section, and the deviation is 7.6%, which shows that the prediction model can accurately predict the yield stress of the structure.

Received: 09 November 2022 Published: 03 April 2024

PACS:

TB931

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Zhiwei
	ZHANG Yuyan
	WEN Yintang
	REN Yaxue

Cite this article:

ZHANG Zhiwei,ZHANG Yuyan,WEN Yintang, et al. Multi-defective Lattice Structure Performance Parameter Prediction Method Based on XGBoost Model[J]. Acta Metrologica Sinica, 2024, 45(4): 559-564.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2024.04.15 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2024/V45/I4/559

［2］	张玉燕, 李永保, 温银堂, 等. 基于CT图像的金属点阵结构内部缺陷检测方法［J］. 计量学报, 2020, 41(5):544-550.
［14］	李梦娜, 吕承泽, 王蕾, 等. 基于机器学习算法的超声流量计使用中检验［J］. 计量学报, 2022, 43(12):1627-1633.
［19］	SHI R, XU X, LI J, et al. Prediction and analysis of train arrival delay based on XGBoost and Bayesian optimization［J］. Applied Soft Computing, 2021, 109:107538.
［18］	程淑红, 张仕军, 李雷华, 等. 基于鱼群运动特征和XGBoost的异常水质监测［J］. 计量学报, 2018, 39(4): 572-577.
［1］	HERTLEIN N, DESHPANDE S, VENUGOPAL V, et al. Prediction of selective laser melting part quality using hybrid Bayesian network［J］. Additive Manufacturing, 2020, 32:101089.
	ZHANG Y Y, LI Y B,WEN Y T, et al. Method for Detecting Internal Defects of Metal Lattice Structure Based on CT Images［J］. Acta Metrologica Sinica, 2020, 41(5): 544-550.
［5］	YU W H, SING S L, CHUA C K, et al. Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: A state of the art review［J］. Progress in Materials Science, 2019, 104: 330-379.
［6］	SING S L, HUANG S, GOH G D, et al. Emerging metallic systems for additive manufacturing: In-situ alloying and multi-metal processing in laser powder bed fusion［J］. Progress in Materials Science, 2021, 119: 100795.
［8］	ECHETA I, DUTTON B, LEACH R K, et al. Finite element modelling of defects in additively manufactured strut-based lattice structures［J］. Additive Manufacturing, 2021, 47:102301.
［10］	LOZANOVSKI B, DOWNING D, TINO R, et al. Non-destructive simulation of node defects in additively manufactured lattice structures［J］. Additive Manufacturing, 2020, 36:101593.
［12］	LEI H, LI C, MENG J, et al. Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis［J］. Materials and Design, 2019, 169:107685.
［3］	CHEN L Y, LIANG S X, LIU Y, et al. Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges［J］. Materials Science and Engineerings, 2021, 146:100648.
［13］	金柯, 陈晓荣. 基于机器视觉的光纤端面几何参数测量研究［J］. 计量学报, 2023, 44(2): 165-170.
	LI M N, LYU C Z, WANG L, et al. In-use Measurement of Ultrasonic Flowmeter Based on Machine Learning Algorithms［J］. Acta Metrologica Sinica, 2022, 43(12): 1627-1633.
［16］	CHEN J, LIU Y. Fatigue property prediction of additively manufactured Ti-6Al-4V using probabilistic physics-guided learning［J］. Additive Manufacturing, 2021, 39:101876.
［4］	SANAEI N, FATEMI A. Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review［J］. Progress in Materials Science, 2021, 117:100724.
	JIN K, CHEN X R. Research on Measurement of Geometric Parameters of Optical Fiber Endface Based on Machine Vision［J］. Acta Metrologica Sinica, 2023, 44(2):165-170.
［7］	BARNES B, BABAMIRI B B, DEMENEGHI G, et al. Quasi-static and dynamic behavior of additively manufactured lattice structures with hybrid topologies［J］. Additive Manufacturing, 2021, 48: 102466.
［9］	LI C, LEI H, ZHANG Z, et al. Architecture design of periodic truss-lattice cells for additive manufacturing［J］. Additive Manufacturing, 2020, 34:101172.
［11］	MCGREGOR D J, TAWFICK S, KING W P. Automated metrology and geometric analysis of additively manufactured lattice structures［J］. Additive Manufacturing, 2019, 28:535-545.
［15］	ZHANG M, SUN C N, ZHANG X, et al. High cycle fatigue life prediction of laser additive manufactured stainless steel: A machine learning approach［J］. International Journal of Fatigue, 2019, 128:105194.
［17］	WANG C, TAN X P, TOR S B, et al. Machine learning in additive manufacturing: State-of-the-art and perspectives［J］. Additive Manufacturing, 2020, 36:101538.
	CHENG S H, ZHANG S J, LI L H, et al. Water Quality Monitoring Based on Fish Movement Characteristics and XGBoost［J］. Acta Metrologica Sinica, 2018, 39(4):572-577.