|
|
Research on Pipeline Crack Detection Based on Microwave Circular Antenna Arrays |
QIU Guo-hua1,2,TIAN Shan-shan1,2,YUAN Qin-wen1,2 |
1. Key Laboratory of Electromagnetic Wave Information Technology and Metrology of Zhejiang Province,Hangzhou,Zhejiang 310018,China
2. College of Information Engineering,China Jiliang University,Hangzhou,Zhejiang 310018,China |
|
|
Abstract A fast nondestructive testing method based on microwave circular antenna arrays has been proposed. It is used to detect longitudinal and transverse joints of pipes. The inner diameter of the pipe used in the experiment was 5.4cm and 8cm respectively. Firstly, the HFSS simulation software is used for simulation to determine the single-mode transmission of microwaves in TE11 mode. Thereafter, the experimental systems were built, the antenna arrays transmit the signal generated by the vector network analyzer into the pipeline, and the antenna arrays receive the reflected wave from the detection pipeline and turn to the vector network analyzer. Pipes with two diameters were detected by different circular antenna arrays. The results indicate that an array of two antenna arrays can detect cracks in pipes with a inner diameter of 5.4cm, and six antenna arrays can clearly detect cracks in pipes with a inner diameter of 8cm. The detection effect of the antenna array is better than that of single-rod antenna. It is a useful exploration for the antenna array to detect pipeline cracks.
|
Received: 18 April 2022
Published: 22 August 2023
|
|
|
|
|
[2] |
田勐, 张勇, 王丽萍, 等. 微焦点棒阳极射线检测技术在转向架激光电弧复合焊焊缝检测中的应用[J]. 电焊机, 2021, 51(6): 68-71.
|
[5] |
石东平, 吴超, 李孜军, 等. 红外热像技术在安全领域的研究进展[J]. 红外技术, 2015, 37(6): 528-535.
|
[15] |
倪彤元, 高超, 杨杨. 红外热像检测技术与应用研究进展[C]//2021年工业建筑学术交流会论文集(下册). 北京: 工业建筑杂志社, 2021: 961-967.
|
[1] |
林俊明, 蔡桂喜, 石银河, 等. 活塞杆涡流探伤与分选集成系统研究[J]. 无损探伤, 2022, 46(2): 14-17.
|
[7] |
张建平. 中国射线检测技术现状及研究进展[J]. 中国石油和化工标准与质量, 2019, 39(6): 58-59.
|
[14] |
李飞, 张甲鹏, 贾石. 管子管板角焊缝渗透检测应用及其影响因素浅析[J]. 电站系统工程, 2022, 38(2): 30-32.
|
|
Zeng X, Su J. Microwave Nondestructive Testing Technology and Application[J]. Instrument User, 2003, 10(2): 33-36.
|
|
Liu W, Liu B P, Bai J J. Key points and application of manual ultrasonic testing method for steel structure welds [J]. Technical Supervision of Petroleum Industry, 2022, 38(1): 9-12.
|
|
Shi D P, Wu C, Li Z J, et al. Research progress of infrared thermal imaging technology in the field of security [J]. Infrared Technology, 2015, 37(6): 528-535.
|
[13] |
张国丰, 严智, 袁光华, 等. 爬波检测技术的应用[J]. 无损检测, 2010, 32(1): 28-31.
|
|
Lu R L, Fei Y P, Bai B Q. The principle of microwave detection and its application in composite materials[J]. Fiberglass/Composite Materials, 2001(2): 40-41.
|
[25] |
梁铁柱, 黄文华, 朱四桃, 等. 一种无焊缝软圆波导仿真与测试[J]. 现代应用物理, 2015, 6(3): 197-201.
|
|
Tian M, Zhang Y, Wang L P, et al. Application of microfocus rod anode ray detection technology in welding seam detection of bogie laser arc hybrid welding [J]. Electric Welding Machine, 2021, 51(6): 68-71.
|
[4] |
曹雄兵. 超声波. 渗透无损检测技术在矿山机械设备上的应用[J]. 河北农机, 2016 (7): 39-40.
|
[8] |
García-Martín J, Gómez-Gil J, Vázquez-Sánchez E. Non-destructive techniques based on eddy current testing[J]. Sensors, 2011, 11(3): 2525-2565.
|
[9] |
刘乾. 激光全息技术在管道测量中的应用与研究[D]. 北京: 华北电力大学, 2013.
|
[16] |
鲍凯, 王俊涛, 吴东流. 新兴的无损检测技术——红外热波成像检测[J]. 无损检测, 2006, 28(8): 393-398.
|
[22] |
韩晓东, 黄珍元, 郑利颖. 基于chirp—z逆变换矢量网络分析仪时域测量技术[J]. 电子测量技术, 2003(3): 1-2.
|
[24] |
王一帮, 吴爱华, 霍晔, 等. 一种用于毫米波器件本征在片S参数校准的新方法[J]. 计量学报, 2022, 43(3): 293-298.
|
[3] |
刘薇, 刘保平, 白锦军. 钢结构焊缝手工超声波检测方法要点及应用[J]. 石油工业技术监督, 2022, 38(1): 9-12.
|
[10] |
卢明辉, 丁雷, 颜学俊, 等. 激光超声技术在工业检测中的应用与展望[J]. 振动, 测试与诊断, 2021, 41(4): 631-643.
|
[11] |
Carvalho A A, Rebello J M A, Souza M P V, et al. Reliability of non-destructive test techniques in the inspection of pipelines used in the oil industry[J]. International journal of pressure vessels and piping, 2008, 85(11): 745-751.
|
|
Bao K, Wang J T, Wu D L. Emerging Nondestructive Testing Technology——Infrared Thermal Wave Imaging Detection [J]. Nondestructive Testing, 2006, 28(8): 393-398.
|
|
Fang L D, Xu X X, Zhao J X, et al. Influence of constant current source on measurement uncertainty of near-infrared spectroscopy sensor[J]. Acta Metrology sinica, 2022, 43(3): 370-377.
|
[21] |
Liu L, Ju Y, Chen M. Optimizing the frequency range of microwaves for high-resolution evaluation of wall thinning locations in a long-distance metal pipe[J]. NDT & E International, 2013, 57: 52-57.
|
|
Han X D, Huang Z Y, Zheng L Y. Time domain measurement technology of vector network analyzer based on chirp-z inverse transform [J]. Electronic Measurement Technology, 2003(3): 1-2.
|
|
Lin J M, Cai G X, Shi Y H, et al. Research on Piston Rod Eddy Current Flaw Detection and Sorting Integrated System [J]. Nondestructive Testing, 2022, 46(2): 14-17.
|
|
Zhang J P. Status and research progress of radiographic inspection technology in China [J]. China Petroleum and Chemical Industry Standards and Quality, 2019, 39(6): 58-59.
|
|
Li F, Zhang J P, Jia S. Application of Penetration Testing for Fillet Welds of Pipe and Tube Sheets and Analysis of Influencing Factors [J]. Power Station System Engineering, 2022, 38(2): 30-32.
|
[20] |
傅文斌. 微波技术与天线[M]. 北京: 机械工业出版社, 2007: 113.
|
[6] |
Liu L, Ju Y. A high-efficiency nondestructive method for remote detection and quantitative evaluation of pipe wall thinning using microwaves[J]. NDT & E International, 2011, 44(1): 106-110.
|
|
Zhang G F, Yan Z, Yuan G H, et al. Application of creeping wave detection technology [J]. Nondestructive Testing, 2010, 32(1): 28-31.
|
[19] |
曾新, 苏杰. 微波无损检测技术及应用[J]. 仪器仪表用户, 2003, 10(2): 33-36.
|
|
Liang T Z, Huang W H, Zhu S T, et al. Simulation and testing of a soft circular waveguide without welds [J]. Modern Applied Physics, 2015, 6(3): 197-201.
|
|
Lu M H, Ding L, Yan X J, et al. Application and prospect of laser ultrasonic technology in industrial inspection [J]. Vibration. Testing and Diagnosis, 2021, 41(4): 631-643.
|
[12] |
Bolotina I, Borikov V, Ivanova V, et al. Application of phased antenna arrays for pipeline leak detection[J]. Journal of Petroleum Science and Engineering, 2018, 161: 497-505.
|
[17] |
方立德, 徐潇潇, 赵计勋, 等. 恒流源对近红外光谱传感器测量不确定度的影响[J]. 计量学报, 2022, 43(3): 370-377.
|
[18] |
陆荣林, 费云鹏, 白宝泉. 微波检测原理及其在复合材料中的应用[J]. 玻璃钢/复合材料, 2001(2): 40-41.
|
[23] |
Wilkinson E J. An N-way hybrid power divider[J]. IRE Transactions on microwave theory and techniques, 1960, 8(1): 116-118.
|
|
Wang Y B, Wu A H, Huo Y, et al. A new method for intrinsic on-chip S-parameter calibration of millimeter-wave devices [J]. Acta Metrology sinica, 2022, 43(3): 293-298.
|
|
|
|