Measurement Method of Large Ring Forgings Based on Point Cloud Simplification
ZHANG Yu-cun1,WANG Zhi-yu1,FU Xian-bin2
1. School of Electrical Engineering, Yanshan University, Qinhuangdao, Hebei 066000, China
2. Hebei University of Environmental Engineering, Qinhuangdao, Hebei 066000, China
Abstract Aiming at the problems of large amount of point cloud data and low quality of point cloud grid in the measurement of large ring forgings, a simplified point cloud measurement algorithm was proposed. Firstly, the target Gaussian curvature of the interior points and boundaries of each vertex on the forging mesh was set to zero.Then, according to the set target curvature, the Ricci flow equation was used to optimize the Ricci flow discrete entropy energy, and the planar target metric was calculated to obtain the parameterized coordinates of each point on the mesh.Finally, the vertex dimension was extended based on the obtained parametric coordinates, and a vertex constraint factor weighted cost function was introduced for mesh simplification measurements.The experimental results showed that the proposed algorithm could handle point cloud models with complex structures, and the simplified point cloud model boundary geometric features were well maintained, which could meet the measurement dimensional accuracy requirements of industrial digital manufacturing.
ZHANG Yu-cun,WANG Zhi-yu,FU Xian-bin. Measurement Method of Large Ring Forgings Based on Point Cloud Simplification[J]. Acta Metrologica Sinica, 2023, 44(7): 1027-1032.
Yao L, Huang S, Xu H, et al. Quadratic Error Metric Mesh Simplification Algorithm Based on Discrete Curvature［J］. Mathematical Problems in Engineering, 2015, 8: 1-7.
［17］
Fu X B, Miao S, Zhang Y C, et al. A new method of processing laser scanning data of radial section dimensions for ring forgings［J］. Measurement, 2020, 153: 107430.
Kong D M, Tian X Q, Cui Y Q, et al. Research on rapid high-precision detection and generation for machining information of cone component in reverse engineering［J］. Acta Metrologica Sinica, 2022, 43(6): 719-724.
［4］
Schuster H F. Segmentation of Lidar Data using the Tensor Voting Framework［J］. International Archives of Photogrammetry Remote Sensing & Spatial Information Sciences, 2004, 35(3): 1073-1078.
Rossignac J, Borrel P. Multi-resolution 3D approximations for rendering complex scenes［M］. Modeling in Computer Graphics: Methodsand Applications, 1993, 455-465.
［15］
Ozaki H, Kyota F, Kanai T. Out-of-core framework for QEM-based mesh simplification［J］. Eurographics Association, May 2015, 10: 87-96.
Tang Z Y, Gao B L, Dou M L. Point clouds simplification algorithm based on weighted least squares surface fitting for curvature computation［J］. Computer Engineering and Design, 2019, 40(6): 1606-1610.
Wei Z J, Xiao L. Parallel out-of-core model simplification algorithm based on improved vertex clustering［J］. Computer Engineering and Applications, 2018, 54(13): 181-190.
［11］
Hoppe H, Derose T, Duchamp T, et al. Mesh Optimization［C］// Proceedings of the 20th Annual Conference on Computer Graphics and Interactive Techniques. Seattle, Washington, USA, 1993.
［14］
Zhang Y C, Wu M L, Fu X B, et al. Reduced algorithm of laser measurement data for geometric parameters of ring forgings based on Artificial Immune Algorithm［J］. Measurement. 2019, 134: 527-538.
［3］
Sun W, Bradley C, Zhang Y F, et al. Cloud data modelling employing a unified, non-redundant triangular mesh［J］. Computer-Aided Design, 2001, 33(2): 183-193.
Chang J, Zhao L, Wang H, et al. Research on k-means clustering point cloud reduction algorithm based on boundary reservation［J］. Engineering of Surveying and Mapping, 2018, 27(7): 60-65.
［7］
Gao Y, Ping C, Wang L, et al. A Simplification Method for Point Cloud of T-Profile Steel Plate for Shipbuilding［J］. Algorithms, 2021, 14(7): 202-213.
Wu J H, Li C, Wang R, et al. The slope fitting method of sonar point cloud on the inner wall of sewer based on density algorithm and tangent slope fitting of the circle［J］. Acta Metrologica Sinica, 2023, 44(2): 231-237.
［12］
Garland M, Heckbert P S. Surface simplification using quadric error metrics［C］// The 24th annual conference on Computer graphics and interactive techniques. Los Angeles, USA, 1997.
Li S J, Jiang X T, Tang H. High-quality simplified algorithm of texture model for detailed features preserving［J］. Application Research of Computers, 2020, 37(01): 300-303.
2023, Vol. 44 
