|
|
Capacity Improvement of Natural Gas Flow Standard Device |
YANG Yan-ping1,LIU Bo-tao2,XU Ming2 |
1. Sinopec Natural Gas Company, Beijing 100029
2. Wuhan Metrology Researth Center of Pipe China West to East Gas Transmission Company, Wuhan, Hubei 430073, China |
|
|
Abstract Introduced the composition,measurement principle,traceability method of measurement value and key measures to improve the calibration capacity of the working flow standard device of Wuhan Branch of National Station of Petroleum & Natural Gas flow Measurement,and evaluated its uncertainty. The uncertainty of absolute pressure and differential pressure measurement, the uncertainty of experimental evaluation of compression factor ratio and the uncertainty of standard turbine flowmeter correction are analyzed. The uncertainty of the standard device is 0.13%~0.16%(k=2),which can meet the verification requirements of the natural gas flowmeter of level 0.5 and below.
|
Received: 11 January 2020
Published: 23 March 2021
|
|
|
|
|
[1]宋进, 刘夷平, 陈超, 等. 标准表法气体流量标准装置标定方法的研究 [J]. 计量学报, 2018, 39 (6A): 101-103.
Song J, Liu Y P, Chen C, et al. Investigation on the Calibration Methods of Gas Flow Standard Facilities by Master Method [J]. Acta Metrologica Sinica, 2018, 39 (6A): 101-103.
[2]陈群尧, 赵矛. 国内外天然气流量计检定流程及水平比较 [J]. 石油工业技术监督, 2018, 36 (11):37-42.
Chen Q Y, Zhao M. Comparison of verification process and level of natural gas flowmeter at home and abroad [J]. Technology Supervision in Petroleum Industry, 2018, 36 (11): 37-42.
[3]徐明, 闫文灿, 陆玉城. 基于HPPP法的高压大流量天然气计量检定站系统工艺 [J]. 油气储运, 2018, 37 (7): 96-101.
Xu M, Yan W C, Lu Y C. Technologies based on HPPP method used in high pressure and high flowrate natural gas metrological verification station[J]. Oil & Gas Storage and Transportation, 2018, 37 (7): 96-101.
[4]闫文灿, 李振林, 徐明. 高压天然气计量检定站工艺设备技术与操作维护 [M]. 北京:中国石化出版社, 2019.
[5]国家质量监督检验检疫总局. JJG 1037—2008 涡轮流量计检定规程 [S]. 2008.
[6]闫瑞锋, 徐志鹏. 并联式标准表法气体流量标准装置测控系统及其不确定度评定研究 [J]. 中国计量, 2017, (2): 82-85.
[7]张翰, 李春辉, 崔骊水,等. 高压环道气体流量标准装置 [J]. 计量学报, 2017, 38(3): 324-327.
Zhang H, Li C H, Cui L S, et al. The Close Loop Standard Facility of High Pressure Gas Flow[J]. Acta Metrologica Sinica, 2017, 38 (3): 324-327.
[8]宗健, 樊勇, 肖丽华, 等. 天然气压缩因子研究与应用策略 [C]// 中国燃气运营与安全研讨会 (第九届) 暨中国土木工程学会燃气分会2018年学术年会论文集 (上). 2018.
[9]Yan W C, Xu M, Pei Y T. Establishment Of natural Gas Flow Measurement Primary Standard With High Pressure Piston Prover (HPPP) [C]// IMEKO International Seminar on Measurement 4-5, Hangzhou, China, 2017.
[10]李春辉, 李鹏. 作为标准表非定点使用的涡轮流量计评定方法探析 [J]. 计量学报, 2015, 36 (6): 610-612.
Li C H, Li P. The Investigation on the Evaluation for the Turbine Meter by the Use of Non-fixed Point as Master Meter [J]. Acta Metrologica Sinica, 2015, 36 (6): 610-612.
[11]刘喆, 蒋兴鹏, 刘译文, 等. 基于线性回归的涡轮标准装置不确定度研究 [J]. 计量技术, 2019, (4): 47-50.
[12]Bremser W, Hasselbarth W, Hirlehei U, et al. Uncer-tainty analysis and long-term stability investigation of the German primary high pressure natural gas test facility Pigsar [C]//11th International Conference on Flow Measurement, FLOMEKO2003, Groningen, The Neth-erlands, May 2003.
[13]国家质量监督检验检疫总局. JJF 1059.1—2012 测量不确定度评定与表示 [S]. 2012.
[14]国家质量监督检验检疫总局. JJF 1033—2016 计量标准考核规范 [S]. 2016. |
|
|
|