|
|
|
| Research on Measurement of Medical Micro Flow Rate Technology Based on Constant Volume Displacement Increment Method |
| LIAO Xu-hui1,CHEN Yu-qiao2,YANG Yong1,WANG Yao-jun3,ZHANG Qiu-chen3,RAN Wen-jie3,YANG Jun-jie3,LI Peng1 |
1. National Institute of Measurement and Testing Technology, Chengdu, Sichuan 610021, China
2. Leshan Metrological Measurement Institute, Leshan, Sichuan 614000, China
3. Sichuan Zhongce Radiation Technology Co. Ltd, Chengdu, Sichuan 610021, China |
|
|
|
|
Abstract Using the principle of measuring the micro-flow rate of a fixed-volume piston cavity, based on the relationship between the piston displacement and the flow rate, the measurement model, theoretical calculation method, hardware design and corresponding software system of medical micro-flow are introduced. The micro-flow measurement technology can complete the calibration of medical infusion pump and injection pump in a short time. The experimental results show that the flow detector can measure the micro-flow rate from 1mL/h to 1500mL/h, and can not only respond to the micro-flow rate of 1mL/h quickly, but also the maximum allowable error of instantaneous flow rate is less than ±1%. The maximum allowable error of cumulative flow rate is less than ±1% when the volume of liquid in the injection chamber is larger than 5mL.
|
|
Received: 07 January 2019
Published: 13 August 2020
|
|
|
|
|
|
［1］曹阳. 浅析输液泵的临床应用［J］. 医疗卫生装备, 2012, 33(9): 103-104.
Cao Y. Clinical Application of Infusion Pump［J］. Chinese Medical Equipment Journal, 2012, 33(9): 103-104.
［2］张勇. 液体微小流量测量方法的研究［D］. 上海大学, 2007.
［3］谢苏江, 谢文谦. 石墨烯/聚四氟乙烯复合密封材料的制备及性能研究［J］. 润滑与密封, 2018, 43(9): 104-107.
Xie S J, Xie W Q. The Preparation and Performance Study of Graphene/PTFE Composites Sealing Materials ［J］. Lubrication Engineering, 2018, 43(9): 104-107.
［4］朱沛, 张大伟, 黄元申, 等. 精密定位光栅尺的研究进展［J］. 激光杂志, 2010, 31(1): 1-3.
Zhu P, Zhang D W, Huang Y S, et al. Review on the precision positioning grating scale［J］. Laser Journal, 2010, 31(1): 1-3.
［5］国家质量监督检验检疫总局. JJF 1259-2018 医用注射泵和输液泵校准规范［S］. 2018.
［6］国家质量监督检验检疫总局. JJF 1104-2003 国家计量检定系统表编写规则［S］. 2003.
［7］何安国, 喻洪麟, 朱传新, 等. 光栅莫尔条纹细分及辨向方法研究［J］. 光电工程, 2007, 34(10): 45-49.
He A G, Yu H L, Zhu C X, et al. Subdivision and direction judgment of grating Moiré fringes［J］. Opto-electronic Engineering, 2007, 34(10): 45-49.
［8］张竟月,孙斌,谢玄达, 等. 基于激光和机器视觉的微量液体容量计量方法［J］. 计量学报, 2018, 39(4): 504-509.
Zhang J Y, Sun B, Xie X D, et al. Volume Metrology Method for Micro Liquid Based on Laser and Machine Vision［J］. Acta Metrologica Sinica, 2018, 39(4): 504-509.
［8］张百海, 柴森春, 贾媛媛, 等. 数据采集系统中光栅尺信号处理方法的研究［J］. 机床与液压, 2003, (2): 118-119.
Zhang B H, Chai S C, Jia Y Y, et al. Study of Linear Encoder Signal Processing Methods in Data Acquisition Systems［J］. Machine Tool & Hydraulics, 2003, (2): 118-119.
［9］刘刚, 凌强, 徐骏, 等. 基于STM32的输液监控系统设计与实现［J］. 信息技术与网络安全, 2016, (1): 91-94.
Liu G, Ling Q, Xu J, et al. Design and implementation of transfusion monitoring Systems based on STM32［J］. Information Technology and Network Security, 2016, (1): 91-94.
［10］周森, 徐健, 陶磊, 等. 用于圆柱体工件分段截面直径高精度测量方法［J］. 计量学报, 2017, 38(6A): 76-79.
Zhou S, Xu J, Tao L, et al. A High-precision Diameter Measuring Method for Multi-sections of Cylinder Workpiece［J］. Acta Metrologica Sinica, 2017, 38(6A): 76-79. |
|
|
|
2020, Vol. 41 
