|
|
|
| Load Cell Loading Pad of Surface to Surface Contact Form with Bearing Ball |
| LIANG Wei1,2,YANG Xiao-xiang1,YAO Jin-hui2,XU Hang2 |
1. School of mechanical engineering and automation, Fuzhou University, Fuzhou, Fujian 350108, China
2. Department of intelligent measurement, Fujian Institute of Metrology, Fuzhou, Fujian 350003, China |
|
|
|
|
Abstract To eliminate the contact stress of the traditional loading pad of load cell and enhance the accuracy and longtime stability of the load cell, a loading pad of surface to surface contact form with bearing ball was designed. The contrast experiment was carried out to verify its performance. The testing results of a 20MN force transducer with the loading pad showed that the repeatability error and position error was less than 0.005% and 0.04%, respectively. The loading pad of surface to surface contact form with bearing ball was confirmed with better specification compared with the loading pad of surface to surface contact form without bearing ball. With smaller frictional resistance, the ball could rotate itself around the cup to compensate the angular misalignment between the upper and bottom contact platen of the load cell. It would uniform the outputs of the load cell loaded in different positions and get better position error. Besides that, the contact stress of this style loading pad was much low, which made the loading pad strong enough to bear large load.
|
|
Received: 10 October 2018
Published: 29 June 2020
|
|
|
|
|
|
［1］Kumar R, Maji S. Force transducers—A review of design and metrological issues［J］. Engineering Solid Mechanics, 2016,4: 81-90.
［2］Stefanescu D M, Anghel M A. Electrical methods for force measurement—A brief survey［J］. Measurement, 2013, 46(2): 949-959.
［3］Palumbo S, Germak A, Mazzoleni F, et al. Design and metrological evaluation of the new 5MN hexapod-shaped multicomponent build-up system［J］. Metrologia, 2016, 53(3): 956-964.
［4］池辉. 基于均力结构60MN叠加式力值传递系统［J］. 计量学报, 2015, 36(2): 221-224.
Chi H. The 60MN build-up force delivery system based on compensating structure［J］. Acta Metrologica Sinica, 2015, 36(2): 221-224.
［5］华劲松, 经福谦, 谭华. 动载荷下材料的屈服强度变化［J］. 固体力学学报, 2001,22(4): 421-426.
Hua J S, Jing F Q, Tan H. The Variation of Yield Strength Under Dynamic Loading［J］. Acta Mechanica Solida Sinica, 2001, 22(4): 421-426.
［6］王有贵, 吴双双, 陈红江. 称重传感器蠕变误差的神经网络补偿方法［J］. 计量学报, 2018, 39(4): 510-514.
Wang Y G, Wu S S, Chen H J. Compensation Method for Creep Error of Load Cell Based on Neural Networks［J］. Acta Metrologica Sinica, 2018, 39(4): 510-514.
［7］施昌彦. 动态称重测力技术的现状和发展趋势［J］. 计量学报, 2001, 22(3): 201-205.
Shi Y C. State of Arts and Trends for the Dynamic Weighing and Force Measuring Technology［J］. Acta Metrologica Sinica
, 2001, 22(3): 201-205.
［8］陈俊翔, 梁伟, 杨晓翔, 等. 球头接触副对柱式负荷传感器方位误差的影响研究［J］. 机电工程, 2018, 35(4): 341-346.
Chen J X, Liang W, Yang X X, et al. Spherical contact pairs influence on azimuth error of the column load sensor［J］. Mechanical & Electrical Engineering Magazine, 2018, 35(4): 341-346.
［9］Tegtmeier F, Rosk D, Liang W. Practical Applications of an Enhanced Uncertainty Model for Build-up Systems［C］//IMEKO 23rd Conference on the Measurement of Force, Mass and Torque Measurement facing new challenges, Helsinki, Finland, 2017.
［10］Tegtmeier F, Wagner M, Kumme R. Investigations of transfer standards in the highest range up to 50 MM within EMRP Project SIB 63［C］//XXI IMEKO World Congress Measurement in Research and Industry. Prague, Czech Republic, 2015.
［11］Wagner M, Tegtmeier F. Processing and evaluation of measured data from Buil-up systems with special regard to various designs［C］//AMA Conferences 2015 SENSOR 2015 and IRS2 2015. Nürnberg Exhibition Centre, Germany, 2015.
［12］Johnson K L. Contact Mechanics［M］. London: Cambridge University Press, 1985.
［13］Ferrero C, MarinarI C, Kumme R, et al. PTB and Inrim High Force Intercomparison up to 9MN［C］//XVIII IMEKO World Congress Metrology for a Sustainable Development. Rio de Janeiro, Brazil, 2006.
［14］ISO 376-2011. Metallic materials-Calibration of force proving instruments used for the verification of uniaxial testing machines［S］. 2011. |
|
|
|
2020, Vol. 41 
