|
|
Indoor Pass-by Noise Measurement Method Based on Acoustic Array Technology |
LIU Ce1,2,CHEN Jian1,2,LI Jia-zhu1,2,3 |
1. School of Mechanical Engineering, Hefei University of Technology, Hefei, Anhui 230009, China
2. Automotive NVH Engineering and Technology Research Center Anhui Province, Hefei, Anhui 230009, China
3. Jiangxi Province Key Laboratory of Vehicle Noise and Vibration, Nanchang, Jiangxi 330013, China |
|
|
Abstract The study of indoor pass-by noise test based on acoustic array technology was carried out. The synthetic algorithm of acoustic array signal was established. In view of the problem that the vehicles running state is different from the outdoors when the pass-by noise is tested indoors. A method for getting correct loading parameters of the chassis dynamometer by modifying the coast-by speed range was proposed to ensure the indoor vehicle running state agrees with the outdoors. Finally the absolute error between the indoor and outdoor pass-by noise test results was within±1dB.
|
Received: 06 January 2019
Published: 10 October 2019
|
|
|
|
|
[1]邱彬, 谢东明, 靳旗, 等. ISO 362-1: 2007 与 ISO 362: 1998标准的差异分析及测试结果对比 [J]. 汽车工程, 2010, 32(4): 363-368.
Qiu B, Xie D M, Jin Q, et al. Discrepancy Analysis and Testing Results Comparison Between Standards ISO362-1: 2007 and ISO362: 1998 [J]. Automotive Engineering, 2010, 32(4): 363-368.
[2]ISO362-1:2007 Measurement of Noise Emitted by Accelerating Road Vehicles—Engineering Method-Part 1: M and N Categories [S]. 2007.
[3]GB 1495-20XX, 汽车加速行驶车外噪声限值及测量方法(草案) [S].
[4]Milind A, Amol S, Reddy Y R k. A Practical Approach for Pass by Noise Testing of a Car Simulated in a Semi-Anechoic Chamber [J]. SAE Paper, DOI: 10. 4271/2011-26-0064, 2011.
[5]Huijssen J, Hallez R, Pluymers B. A synthesis procedure for pass-by noise of automotive vehicles employing numerically evaluated source-receiver transfer functions [J]. Journal of Sound and Vibration, 2013, 332(1): 3079-3802.
[6]王秀峰, 施杰, 瞿晓荣. 时域能量空气声源定量法在汽车加速通过噪声贡献量分析中的应用 [J]. 噪声与振动控制, 2015, 35(S1): 142-145.
Wang X F, Shi J, Qu X R. Time-domain Energetic Airborne Source Quantification Method and Its Application in the Vehicle Pass-by Noise Contribution Analysis [J]. Noise And Vibration Control, 2015, 35(S1): 142-145.
[7]Kim B K, Yoo S, Kim H, et al. Prediction of Vehicle Pass-By Noise Using Indoor Measurements [J]. SAE Paper, DOI: 10. 4271/2001-01-1536, 2001.
[8]Genuit K, Guidati S, Sottek R. Progresses in Pass-by Simulation Techniques [J]. SAE Paper, DOI: 10. 4271/2005-01-2262, 2005.
[9]Braun M E, Walsh S J, Horner J L, et al. Noise source characteristics in the ISO 362 vehicle pass-by noise test: Literature review [J]. Applied Acoustics, 2013, 74(4): 1241-1265.
[10]Morse P M, Ingard K U. Theoretical Acoustics [M]. NewYork: McGraw-Hill, 1968, 721-724.
[11]周新伟, 王问雄, 陈治颖, 等. 一种用于转鼓工况试验的汽车道路阻力系数测定方法 [J]. 汽车科技, 2017, (1): 70-73.
Zhou X W, Chen Z Y, Wang W X, et al. A Method of Determining Road Resistance coefficient for Chassis Dynamometer Duty Cycle Testing [J]. Auto Sci-Tech, 2017, (1)70-73.
[12]GB/T 12536-90 汽车滑行实验方法 [S]. 1990.
[13]ISO362-3:2016 Measurement of noise emitted by accelerating road vehicles—Engineering method-Part 3: Indoor testing M and N categories [S]. 2016. |
|
|
|