串联式制动阀静特性仿真及测试方法研究

doi:10.3969/j.issn.1000-1158.2019.06.24

Abstract
Figure/Table
References (12)
Related Citation (15)

Download: PDF (1899 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The static characteristics of the series brake valve are applied to evaluate the relationship between the output pressure of an air-brake system and the brake stroke during the state of braking balance. The effect of the structural on static characteristics was analyzed by a parameter model based on the AMEsim. A static response process of the series brake valve was built both by its industry standards and the working principle of the linear load system in a simulation environment. In order to reproduce the response process under braking state, a measurement system of static characteristics for the series brake valve was designed by LabVIEW platform utilizing a high-accuracy data acquisition system. Both the MSA and comparative analytical method were introduced to verify the reliability of the system. The experimental result show that the measurement ability index Cg is less than 1.67, and system accuracy indexes are less than 30%, which meet the acceptance requirements of new equipment.

Key words： metrology series brake valve static characteristics test measurement system analysis

Received: 25 June 2018 Published: 10 October 2019

PACS:

TB931

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	HU Xiao-feng
	JIANG Wen-song
	GUO Bin
	ZHAO Jing
	LUO Zai

Cite this article:

HU Xiao-feng,JIANG Wen-song,GUO Bin, et al. Study on the Simulation and Test Method of Static Characteristics for Series Brake Valve[J]. Acta Metrologica Sinica, 2019, 40(6): 1088-1095.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2019.06.24 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2019/V40/I6/1088

［1］马恩. 活塞弹簧式气制动阀静特性的研究［J］. 农机化研究, 2012, (6): 215-218.
Ma E. Study on the Static Characteristic of Piston Spring Pneumatic Brake Valve［J］. Journal of Agricultural Mechanization Research, 2012, (6): 215-218.
［2］马恩, 李素敏. 新型气制动阀特性的试验研究［J］. 液压与气动, 2016, (12): 54-60.
Ma E, Li S M. Experimental Study on Characteristics of New-type Pneumatic Brake Valves［J］. Chinese Hydraulics & Pneumatics, 2016, (12): 54-60.
［3］陈勇, 王世耕, 陈国聪,等. 新型汽车气制动阀静特性自动测试系统［J］. 重庆大学学报(自然科学版), 2006, 29(1): 19-21.
Chen Y, Wang S G, Chen G C, et al. Development of Static Characteristic Automatic Testing System About Brake Valves of Automobile［J］. Journal of Chongqing University(Natural Science Edition), 2006, 29(1): 19-21.
［4］Zbigniew K, Krzysztof K. Measurement and evaluation of the quality of static characteristics of brake valves for agricultural trailers［J］. Measurement, 2017, 106: 173-178.
［5］陆艺, 徐博文, 吴佳伟, 等. 基于模糊PID的客车防抱死制动系统硬件在环测试试验研究［J］. 计量学报, 2018, 39(2): 163-167.
Lu Y, Xu B W, Wu J W, et al. Research on Hardware-in-the-Loop Test of Bus Antilock Brake System Based on Fuzzy PID［J］. Acta Metrologica Sinica, 2018, 39(2): 163-167.
［6］范伟军, 赵晨鑫, 毛民, 等. 四回路保护阀启闭特性检测系统建模仿真与验证［J］. 农业机械学报, 2017, 48(2): 385-392.
Fan W J, Zhao C X, Mao M, et al. Modeling and Experiment Verification of Open and Shut CharacteristicDetection System for Four-circuit Protection Valve ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2017, 48(2): 385-392.
［7］宗长富, 万滢, 赵伟强, 等. 气压电控制动系统仿真平台及补偿控制策略开发［J］. 吉林大学学报(工学版), 2015, 46(3): 711-717.
Zong C F, Wan Y, Zhao W Q, et al. Development of simulation platform and hysteresis control strategy of pneumatic braking system for commercial vehicles ［J］. Journal of Jilin University(Engineering and Technology Edition), 2015, 46(3): 711-717.
［8］陆艺, 郭斌, 潘小旺, 等. 直动型气动电磁阀综合性能测试系统研制［J］. 仪器仪表学报, 2011, 32(4): 795-800.
Lu Y, Guo B, Pan X W, et al. Study on integrative performance test system for direct-driven pneumatic solenoid valve ［J］. Chinese Journal of Scientific Instrument, 2011, 32(4): 795-800.
［9］谢康康, 郭斌, 胡晓峰, 等. 基于视觉定位的四保阀开启压力自动调节系统［J］. 电子测量与仪器学报, 2018, 32(3): 9-17.
Xie K K, Guo B, Hu X F, et al. Automatic adjustment system of opening pressure of four-circuit protection valve based on visual localization ［J］. Journal of Electronic Measurement and Instrumentation, 2018, 32(3): 9-17.
［10］JBT 10633-2006 专用检测设备评定方法指南［S］. 2006.
［11］方兴华, 宋明顺, 顾龙芳, 等. 基于自适应蒙特卡罗方法的测量不确定度评定［J］. 计量学报, 2016, 37(4): 452-456.
Fang X H, Song M S, Gu L F, et al. Application of Adaptive Monte Carlo Method on Measurement Uncertainty Evaluation ［J］. Acta Metrologica Sinica, 2016, 37(4): 452-456.
［12］Aguado S, Perez P, Albajez J A, et al. Monte Carlo Method to Machine Tool Uncertainty Evaluation ［J］. Procedia Manufacturing, 2017, 13: 585-592.