Acta Metrologica Sinica  2019, Vol. 40 Issue (6): 1000-1005    DOI: 10.3969/j.issn.1000-1158.2019.06.10
Current Issue | Archive | Adv Search |
Research on 3D Model Acquisition SystemBased on Multiple View
CAO Wen-yi1,2,CHEN Ji-min1,2,YUAN Yan-ping1,2,LIU Si-da1,2
1. Beijing Engineering Research Center of 3D Printing for Digital Medical Health, Beijing 100124, China
2. Institute of Laser Engineering, Beijing University of Technology, Beijing 100124, China
Download: PDF (1094 KB)   HTML (1 KB) 
Export: BibTeX | EndNote (RIS)      
Abstract  A new 3D model acquisition system is designed based on multiple view used the technology of 3D scanner and stereo vision, 3D model collection can be conducted using one camera combined with basic mechanical system. 3D model acquisition system was used for calibration experiments and the experimental results shown that the mean deviation in circumferential direction Rr=0.94 and in line direction Rl=0.87 which can meet the accuracy requirement in 3D printing reverse engineering areas. 3D model acquisition system based on multiple view can perform high accurate collecting task at low-cost compared to traditional system. This achievement was the foundation work to the depth study of 3D model acquisition system.
Key words： metrology      multiple view      3D printing      3D model      acquisition system      scanning      stereo vision     
Received: 06 August 2018      Published: 10 October 2019
PACS:  TB96  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
CAO Wen-yi
CHEN Ji-min
YUAN Yan-ping
LIU Si-da
Cite this article:   
CAO Wen-yi,CHEN Ji-min,YUAN Yan-ping, et al. Research on 3D Model Acquisition SystemBased on Multiple View[J]. Acta Metrologica Sinica, 2019, 40(6): 1000-1005.
URL:  
http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2019.06.10     OR     http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2019/V40/I6/1000
Copyright © Editorial Board of Acta Metrologica Sinica
Supported by:Beijing Magtech