[1]Bayón A, Gascón F, Medina R, et al. On the flexural vibration of cylinders under axial loads: Numerical and experimental study [J]. Journal of sound and vibration, 2012, 331(10): 2315-2333.
[2]Khramshin V R, Evdokimov A S, Kornilov G P, et al. System for speed mode control of the electric drives of the continuous train of the hot-rolling mill [C]// Control and Communications (SIBCON), 2015 International Siberian Conference on. IEEE, 2015: 1-6.
[3]Stürmer M, Dagner J, Manstetten P, et al. Real-time simulation of temperature in hot rolling rolls [J]. Journal of Computational Science, 2014, 5(5): 732-742.
[4]刘彬, 姜甲浩, 刘飞, 等. 基于轧件水平振动的轧机辊系振动补偿模型[J]. 计量学报, 2018, 39(1): 56-60.
Liu B, Jiang J H, Liu F, et al. Compensative Vibration Model of Roll System Based on Horizontal Vibration of Rolled Piece [J]. Acta Metrologica Sinica, 2018, 39(1): 56-60.
[5]谢长贵, 曾海. 1220冷连轧机带钢表面振纹机理的研究[J]. 计量学报, 2015, 36(6): 595-599.
Xie C G, Zeng H. Mechanism of the Strip Surface Chatter Marks of the 1220 Cold Rolling Mill [J]. Acta Metrologica Sinica, 2015, 36(6): 595-598.
[6]朱勇, 姜万录, 刘思远, 等. 非线性液压弹簧力对电液伺服系统非线性动力学行为影响的研究[J]. 中国机械工程, 2015, 26(8): 1086-1098.
Zhu Y, Jiang W L, Liu S Y, et al. Research on Influences of Nonlinear Hydraulic Spring Force on Nonlinear Dynamic Behaviors of Electro-hydraulic Servo System [J]. China Mechanical Engineering, 2015, 26(8): 1085-1091,1104
[7]范小彬, 臧勇, 王会刚. 热连轧机垂直振动特性研究[J]. 中国机械工程, 2010, 21(15): 1801-1804.
Fan X B, Zang Y, Wang H G. Research on Vertical Vibration of Hot Rolling Mill [J]. China Mechanical Engineering, 2010, 21(15): 1801-1804.
[8]孙建亮, 刘宏民, 李琰赟, 等. 热连轧机水平振动及其与轧制参数影响关系[J]. 钢铁, 2015, 50(1): 43-49.
Sun J L, Liu H M, Li Y Y, et al. Horizontal vibration of hot rolling mill and its relationship with rolling parameters [J]. Iron and Steel, 2015, 50(1): 43-49.
[9]高强, 房祥波, 赵艳青, 等. 变质量动力吸振器及其减振性能[J]. 长安大学学报(自然科学版), 2013, 33(5): 90-120.
Gao Q, Fang X B, Zhao Y Q, et al. Variable mass dynamic vibration absorber and its performance of vibration reduction [J]. Journal of Changan University (Natural Science Edition), 2013, 33(5): 90-120.
[10]孟宗, 付立元, 宋明厚. 一类非线性相对转动系统的组合谐波分岔行为研究[J]. 物理学报, 2013, 62(5): 54501.
Meng Z, Fu L Y, Song M X. Bifurcation of a kind of nonlinear-relative rotational system with combined harmonic excitation [J]. Acta Physica Sinica, 2013, 62(5): 54501.
[10]刘彬,姜佳磊,潘贵翔,等. 液压缸非线性弹簧力约束下轧机吸振器参数的优化[J]. 计量学报, 2019, 40(3): 378-384.
Liu B, Jiang J L, Pan G X, et al. Optimization of Parameters of Vibration Absorber of Rolling Mill System under the Nonlinear Spring Force of Hydraulic Cylinder[J]. Acta Metrologica Sinica, 2019, 40(3): 378-384.
[11]Grigorios A P, Andrew M S. 多尺度计算方法:均匀化和平均化[M]. 郑健龙, 李友云, 钱国平, 译. 北京:科学出版社, 2010. |