|
|
|
| The Preprocessing Method of the Blade Tip-timing Measurement without a Once-per-revolution Sensor and Error Analysis |
| ZHANG Ji-long,DUAN Fa-jie,NIU Guang-yue |
| State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, China |
|
|
|
|
Abstract A method for preprocessing tip-timing signals that does not require a once-per-revolution (OPR) sensor is proposed.The method measures the difference in the blades vibration displacement when it arrives at different tip-timing sensors to identify the blades vibration parameters and the rotational speed of the rotor.Error analysis indicates that the method can reduce the rotational speed measurement error and its impact on the vibration displacement measurement.The measurement error of the difference in vibration displacement is analyzed and compared with the method that requires an OPR sensor.Experiment results show that the method is feasible for BTT signal preprocessing without an OPR sensor and is very accurate.
|
|
Received: 03 July 2017
Published: 06 July 2018
|
|
|
|
|
|
［1］Kumar S, Roy N, Ganguli R. Monitoring low cycle fatigue damage in turbine blade using vibration characteristics［J］. Mechanical Systems & Signal Processing, 2007, 21(1):480-501.
［2］Rao A R, Dutta B K. Vibration analysis for detecting failure of compressor blade［J］. Engineering Failure Analysis, 2012,25(25):211-218.
［3］Salhi B, Lardiès J, Berthillier M, et al. Modal parameter identification of mistuned bladed disks using tip timing data［J］. Journal of Sound & Vibration, 2008,314(3-5):885-906.
［4］Guru S S, Shylaja S, Kumar S, et al. Pre-emptive rotor blade damage identification by blade tip timing method［J］. Journal of Engineering for Gas Turbines & Power, 2013,136(7):072504-072507.
［5］Dimitriadis G, Carrington I B, Wright J R, et al. Blade-tip timing measurement of synchronous vibrations of rotating bladed assemblies［J］. Mechanical Systems & Signal Processing, 2002,16(4):599-622.
［6］Diamond D H,Heyns P S,Oberholster A J.A comparison between three blade tip timing algorithms for estimating synchronous turbomachine blade vibration［M］.Cham Switzerland:Springer International Publishing,2015:215-225.
［7］方志强, 段发阶,孙宇扬,等.非接触式叶片振测系统的叶尖定时传感器的研究［J］.计量学报, 2003, 24(2):119-121.
［8］Lawson C P, Ivey P C. Tubomachinery blade vibration amplitude measurement through tip timing with capacitance tip clearance probes［J］. Sensors & Actuators A Physical, 2005,118(1):14-24.
［9］王维民, 尚文, 姚剑飞,等.基于电涡流技术的叶尖间隙及定时测量研究［J］.北京化工大学学报(自然科学版), 2014, 41(3):102-107.
［10］Ferraris G, Maisonneuve V, Lalanne M. Prediction of the dynamic behavior of non-symmetrical coaxial co-or coun-terrotating rotors［J］. Journal of Sound & Vibration, 1996,195(4):649-666.
［11］Heath S, Imregun M. An improved single-parameter tip-timing method for turbomachinery blade vibration meas-urements using optical laser probes［J］. International Journal of Mechanical Sciences, 1996,38(10):1047-1058.
［12］Guo H, Duan F, Zhang J. Blade resonance parameter identification based on tip-timing method without the once-per revolution sensor［J］. Mechanical Systems & Signal Processing, 2016, 66-67:625-639. |
|
|
|
2018, Vol. 39 
