水平仪测试竖直轴系倾角回转误差的数据处理

doi:10.3969/j.issn.1000-1158.2018.03.05

Abstract
Figure/Table
References (17)
Related Citation (15)

Download: PDF (408 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to accurately appraise the wobble errors of the vertical axis system measured by two orthogonal levels, the readouts of the levels were analyzed and the error compositions are expounded.And the coupling relationships among the harmonic components of the readouts, and of the wobble errors, the plumb error of the vertical axis line, are analyzed.According to the two existing methods, transforming the processed readouts into the expressions in the fixed coordinate system, thus the two processing methods are put forward.The orthogonal and the correlative first harmonic errors are separated from the total first harmonic, namely the correlative first harmonic which is the composition of wobble errors is retained.In the end, by modifying the plumb errors, and measuring wobble errors eight times correspondingly, and the correctness of the proposed method is verified by the comparison with the identified parameters.

Key words： metrology wobble errors level vertical axis system first harmonic resonance error separation technique

Received: 17 May 2017 Published: 12 April 2018

PACS:

TB92

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Zi-hao
	REN Shun-qing

Cite this article:

WANG Zi-hao,REN Shun-qing. A Novel Data Processing Method of Measuring Wobble Errors of Vertical Axis System with Levels[J]. Acta Metrologica Sinica, 2018, 39(3): 310-315.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2018.03.05 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2018/V39/I3/310

［1］陈剑雄,林述温,韩国强.基于球杆仪的旋转轴几何误差测量和辨识［J］.计量学报,2014,35(3):198-203.
［2］郭天太,王晓晓,洪博,等. 二维精密工作台离散点测量结果误差分离的新方法研究［J］.计量学报,2014,35(2):113-119.
［3］Zhu J B,Zhang J H,Guo J K.Research of the influence of geometrical factors on rotary accuracy of high-precision spindle［C］//IEEE International Symposium on Assembly and Manufacturing,Xian, China,2013:264-269.
［4］王欣,赵宏.轴类偏心零件偏心量测量方法及探测头误差分析研究［J］. 计量学报, 2015,36 (4): 360-364.
［5］Cappa S, Reynaerts D, Al-Bender F. A sub-nanometre spindle error motion separation technique［J］.Precision Engineering,2014,38(3):458-471.
［6］夏瑞雪,陈晓怀,卢荣胜,等.新型纳米三坐标测量误差检定方法的研究［J］.电子测量与仪器学报,2010,24(3):250-256.
［7］于博,于正林,顾莉栋,等.切线法数控成形非球面机床的定位误差补偿研究［J］.计量学报, 2014,35 (6): 555-558.
［8］孙艳玲,常素萍. 接触式表面轮廓测量的非线性误差分析与补偿［J］. 计量学报, 2016,37(6): 563-568.
［9］Jin L, Yan Z Y, Xie L M, et al. An experimental investigation of spindle rotary error on high-speed machining center［J］.International Journal of Advanced Manufacturing Technology,2014, 70(4):327-334.
［10］Ma P, Zhao C M, Lu X H, et al. Rotation error measurement technology and experimentation research of high-precision hydrostatic spindle［J］. International Journal of Advanced Manufacturing Teconology,2014,73(9-12):1313-1320.
［11］张景和,冯晓国,刘伟.用反向法测轴系回转误差［J］.光学精密工程,2001,9(2):155-158.
［12］雷贤卿,高作斌,马文锁,等.基于几何搜索逼近的球度误差最小区域评定［J］.计量学报, 2016, 37 (2): 123-127.
［13］Chen D J, Fan J W, Zhang F H. An identification method for spindle rotation error of a diamond turning machine based on the wavelet transform［J］. International Journal of Advanced Manufacturing Technology,2012,63:457-464.
［14］任顺清,王俊柱.用水平仪测试倾角回转误差的数据处理［J］.哈尔滨工业大学学报, 2006,38(6):837-839.
［15］任顺清,房振勇,吴广玉,等.竖直轴系倾角回转误差的两种测试方法的比较［J］. 中国惯性技术学报,2000,8(3):74-78.
［16］孙方金,陈世杰.精密轴系回转精度测试［M］.黑龙江:哈尔滨工业大学出版社, 1997:32-34.
［17］GJB1801-1993 惯性技术测试设备主要性能测试方法［S］. 1993.