|
|
Research on Dynamic Characteristics of Closed Process for New Control and Protection Switch |
SU Jin-zhou1,2,XU Zhi-hong1 |
1. University Fuzhou, Fuzhou, Fujian 350108, China
2. Fujian Inspection and Research Institute for Product Quality, Fuzhou, Fujian 350002, China |
|
|
Abstract Based on the structure of KB0 series products, a new dynamic test system of control and protection switch based on single-chip microcomputer and high-speed image processing technology is designed on the basis of its dynamic mathematical model. The system can test the displacement of the core and the contact of the protective switch, and verify the accuracy of the displacement test under no-load condition. The dynamic characteristics of the new control and protection switch closing process are studied. The closing action time of the switch is tested under different working voltage, working frequency and closing phase angle. It has be done that studing on the contact bounce phenomenon model control and protection switch process, analyzing the reason of a bounce and two bounce generated, and exploring its core and closed at the end of the speed inner link mechanism. The optimum phase obtained is about 30 degrees through the test results of the data statistics and chart analysis, considering the time of action, contact bounce, terminal velocity and core at the end of the contact speed parameters.
|
Received: 03 July 2017
Published: 11 February 2018
|
|
Corresponding Authors:
Zhi-Hong XU
E-mail: 641936593@qq.com
|
|
|
|
[1]林抒毅,许志红.交流接触器三维动态过程数值计算与分析[J].中国电机工程学报,2014,34(18), 2967-2975.
[2]陈弘,陈德为.基于LabVIEW的转动式交流接触器动态特性测试装置的研究[J].电气开关,2010, 48 (1) :37-39.
[3]刘向军,许雄,兰太寿.电磁机构三维动态特性测试及数据处理与分析[J].仪器仪表学报,2014, 35 (10) :2208-2215.
[4]顾建青,唐文献,谢心意.框架式断路器机构系统动态仿真与试验研究[J].低压电器,2006, (1) :16-19.
[5]陈德为,张培铭.基于高速摄像机的智能交流接触器动态测试与分析技术[J].仪器仪表学报,2010, 31(4) :878-884.
[6]鲍光海,张培铭.电器动态特性测试系统图像处理技术研究[J].郑州大学学报(工学版),2011, 32 (4) :72-75.
[7]陈聪,郭其一,黄世泽,等.控制与保护开关电磁系统动态仿真研究[J].低压电器,2013, (21) :27-30.
[8]王波 ,钮赛赛.一种基于图像处理的万能工具显微镜测量新方法[J].计量学报,2011,32 (5) :419-423.
[9]贾伟广, 吉建华 , 马志刚, 等. 基于数字图像处理的高精度海洋潮位计量检测技术[J]. 计量学报, 2015 , 36 (5):513-516.
[10]王卫东, 翟超 , 陈柯. 机床主轴回转精度的CCD测量系统[J].计量学报, 2006 , 27 (1) :18-21.
[11]杨国标, 王东方, 朱启荣. 双CCD数字图像相关测量系统精度影响因素的综合分析[J]. 计量学报, 2006, 27(z1):142-145. |
|
|
|