角膜曲率计轴位标准器的研制

doi:10.3969/j.issn.1000-1158.2017.03.05

Abstract
Figure/Table
References (10)
Related Citation (15)

Download: PDF (532 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to resolve the axis calibration of ophthalmometers, aixal standard device is developed which consists of axial model eye, axial sleeve and measurement support. Axial model eye is a square cylinder whose front surface is toroidal and back surface is scrub plane, which is located in the square through hole of axial sleeve, and axial sleeve is located on the trapezoid groove of measurement support. By assembly and mechanical positioning,the measurement of four axes of 0°, 45°, 90° and 135° are achieved and axis uncertainty is about 0.5° with coverage factor of 2, which meets the requirement of axis calibration for different kinds of ophthalmometers. Moreover, the developed axial standard device not only expands measurement capabilities of the existing working standard of ophthalmometers, but also provides technical support for revision of related verification regulations.

Key words： metrology ophthalmometer axial standard device toroidal surface calibration

Received: 11 June 2015 Published: 19 April 2017

PACS:	计量学
	角膜曲率计
	轴位标准器
	环曲面
	校准

Corresponding Authors: ZHANG JiJiyan E-mail: zhangjy@nim.ac.cn

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Ji-yan
	LI Jiao
	GAO Ming-liang
	DING Xiang

Cite this article:

ZHANG Ji-yan,LI Jiao,GAO Ming-liang, et al. The Development of Axial Standard Device for Calibration of Ophthalmometers[J]. Acta Metrologica Sinica, 2017, 38(3): 276-279.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2017.03.05 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2017/V38/I3/276

[1]	ZHANG Yong-zhuo, WANG Jing, FU Bo-qiang, HUANG Xiang, DONG Lian-hua, NIU Chun-yan, YANG Jia-yi. Nucleic Acid Detection of the SARS-CoV-2[J]. Acta Metrologica Sinica, 2020, 41(4): 393-398.