［1］郭峰．坐标测量技术在航空制造中的应用［J］．航空制造技术,2013,(19): 26-29.
［2］Michael Bohnel, Andreas Gruber, Nils Reims．  Methods for quantitative characterization of large-scale high energy computed tomography systems［C］//iCT Conference 2014, Wels, Austria:2014,1-8.
［3］蔺小军,刘相柱,郭研,等.基于CMM测量的航空发动机叶片型面误差分离技术［J］.计量学报, 2014,35(1): 18-24.
［4］王义旭,施玉书,高思田,等.工业CT探测尺寸误差的校准及误差分析［J］.计量学报, 2014,35(3): 216-220.
［5］陈思,陈浩,李敬,等．一种工业CT测量精度评估方法［J］.强激光与粒子束, 2013,25(8): 2096-2100.
［6］李敬,陈浩,王远, 等．基于工业CT技术的结构尺寸测量精度研究［C］//第十三届中国体视学与图像分析学术会议,山西太原:2013,396-403.
［7］Nardelli V C,Arenhart F A,Donatelli G D, et al． Using calibrated parts and integral surface analysis to investigate dimensional CT measurements［C］//International Symposium on Digital Industrial Radiology and Computed Tomography,Berlin,Germany: 2011,185-192.
［8］Amirkhanov A, Frohler B, Reiter M, et al．  Uncertainty in CT metrology: visualizations for exploration and analysis of geometric tolerances［C］//iCT Conference 2014,Wels, Austria:2014,189-195.
［9］Bartscher M,Bremer H,Birth T, et al．  The resolution of dimensional CT- an edge-based analysis［C］//iCT Conference 2012,Wels, Austria:2012,191-200.
［10］Bartscher M,Staude A,Ehrig K, et al．  The influence of data filtering on dimensional measurements with CT［C］//18th World Conference on Nondestructive Testing,Durban, South Africa:2012,1-13.
［11］Tom B, Daniel E, David F．Metals affordability initiative consortium．Advanced Materials & Processes［J］．2002,160(5): 30-32.
［12］Takatsuji T,Abe M,Fujimoto H．Dimensinal X-ray CT in Japan, development,application and standardization［C］//iCT Conference 2014,Wels, Austria:2014,169-180.
［13］Kiekens K,Ye T,Welkenhuyzen F, et al． Uncertainty determination for dimensional measurements with computed tomography［C］//iCT Conference 2012,Wels, Austria:2012,183-190.
［14］Ye T,Kiekens K,Kruth J P, et al．Material dependent thresholding for dimensional X-ray computed tomography［C］//International Symposium on Digital Industrial Radiology and Computed Tomography,Berlin,Germany:2011,89-96.
［15］Carmignato S,Anna Pierobon． Preliminary results of the 'CT Audit' project:first international intercomparison of computed tomography systems for dimensional metrology［C］//International Symposium on Digital Industrial Radiology and Computed Tomography,Berlin,Germany:2011,25-32.
［16］ISO/IEC Guide 98-3:2008 Guide to the expression of uncertainty in measurement［S］.
［17］国家质量技术监督局计量司．测量不确定度评定与表示指南［Ｍ］．北京:中国计量出版社,2005.
［18］Wenig P.,Kasperl S．Examination of the measurement uncertainty on dimensional measurements by X-ray computed tomography［C］//ECNDT 2006,Berlin,Germany:2006,1-10.
［19］Hiller J,Kasperl S,Schon T, et al．Comparison of probing error in dimensional measurement by means of 3D computed tomography with circular and helical sampling［Ｃ］//NDT in Aerospace,Hamburg,Germany:2010,1-7.