精密电阻器热阻分析及测定方法研究

doi:10.3969/j.issn.1000-1158.2015.03.16

Abstract
Figure/Table
References (10)
Related Citation (15)

Download: PDF (876 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract A new method of measuring thermal resistance for manganese-copper wire precision resistance is developed. The thermal resistance calculation formula which is suitable for manganese-copper wire precision resistance is derived. A test system for temperature characteristic of resistance and load effect of resistance is built. The phenomenon of zero load effect point is explained. The repeatability of measuring results for of zero load effect point got in experiment is about several parts in 10-8. Finally, the load effect testing method for other resistors with rated power is introduced, in which the reference resistor is the manganese-copper wire precision resistor with measured zero effect point.

Key words： Metrology Thermal resistance calculation Temperature characteristic Load effect Manganese-copper wire resistor Reference resistor

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WU Jian
	LI Zheng-kun
	CHEN Le
	ZHANG Zhong-hua

Cite this article:

WU Jian,LI Zheng-kun,CHEN Le, et al. Research on Analysis and Measurement Method for Thermal Resistance of Precision Resistor[J]. Acta Metrologica Sinica, 2015, 36(3): 299-303.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2015.03.16 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2015/V36/I3/299

［1］唐统一.近代电磁测量［M］.北京:中国计量出版社,1992.
［2］Jones G R,Elmquist R E. Characterization of loading effects in precision 1Ω resistors［C］//Conf Digest of CPEM 2008,Broomfield ,2008.
［3］胡毅飞,赵伟,朱珠,等.直流数字纳伏表校准装置研究［J］.计量学报,2007,28(1):5-9.
［4］Schumacher B. CCEM-K10 Key Comparison of Resistance Standards at 100Ω［C ］//Conf Digest of CPEM 2008, Broomfield,2008.
［5］任子生,施大申.电阻负载系数的精密测量［J］.电测与仪表,2000,37(415):19-21.
［6］Tadros N N. Investigation into the effect of loading on the NIS primary group of standard resistors ［C］//Instrumentation and Measurement Technology Conference,St Paul, MN,1998.
［7］董亮,林鸿,张金涛.基于LabVIEW8.0的铜电阻温度系数的测量方法研究［J］.计量技术,2008,(7):13-16.
［8］李艳强.基于LabVIEW的标准电阻温度系数测试系统［J］.机械工程与自动化,2012,174(5):155-157.
［9］张钟华,李辰,贺青,等.能量天平研究进展［J］.计量学报,2014,35（4）:305-310.

［10］Lan J,Zhang Z H,Li Z K,et al. High precision measurement of the load effect of the resistor［C］//Conf Digest of CPEM 2012,Washington D C,2012.

[1]	XU Feng, LI Zhi-wei, FENG Jian. Analysis and Uncertainty Evaluation of Capacitance Measurement of Supercapacitors by Constant Current Discharge Method[J]. Acta Metrologica Sinica, 2020, 41(4): 489-493.