|
|
Study on the Influence Rule of Different Imaging Distance to Distortion Coefficients |
PAN Hui, WANG Min, XU Jian-liang, LIU Xiao-hui, XU Si-xiang |
Engineering Practice and Innovation Education Center, Anhui University of Technology, Maanshan, Anhui 243002, China |
|
|
Abstract Based on the approach to estimate the image distortion coefficients through a set of collinear pints,the influence of the distance between the object plane and the lens plane on the image distortion coefficients is studied. Combined with the experimental result,the change rule of the distortion coefficients is explored. Then,the influence of the distortion coefficients (under various distances between the object plane and the lens plane) on the correction of the same gauge block is experimentally researched. The experimental results show that the correction results of gauge block image are different under different parameters of distortion coefficients. Only when the chosen distance in the distortion parameters is the same as the real imaging distance,the correction precision is the highest,and the measured accuracy of the gauge is also the highest.
|
|
|
|
|
[1] 段发阶,张健新,叶声华. CCD摄像机参数标定新技术[J]. 计量学报,1997,18(4):294-299.
[2] Weng J, Cohen P, Herniou M. Camera calibration with distortion models and accuracy evaluation [J]. IEEE Trans. Pattern Analysis Machine Intelligence,1992,14(10):965-980.
[3] Ahmed M, Farag A. Nonmetric calibration of camera lens distortion: Differential methods and robust estimation [J].IEEE Transaction on Image Processing,2005,14(8):1215-1230.
[4] 黄桂平,李广云,王保丰,等. 单目视觉测量技术研究[J].计量学报,2004, 25(4): 314-317.
[5] 杨必武,郭晓松. 摄像机镜头非线性畸变校正方法综述[J ].中国图象图形学报,2005,10(3): 269-274.
[6] Weng J, Cohen P, Herniou M. Camera calibration with distortion models and accuracy evaluation[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1992,14(10): 956-980.
[7] Chao Zhang, Helferty J P, McLennan G, et al. Nonlinear distortion correction in endoscopic video images[C]//Image Processing 2000 International Conference.2000,2:439-442.
[8] 姜大志,孙俊兰,郁倩,等. 标准图形法求解相机镜头非线性畸变的研究[J]. 东南大学学报,2001,31 (4):111-116.
[9] 孔明,王式民.共轴法立体视觉三维测量的研究[J].计量学报,2004,25(4):294-297.
[10] 周富强,胡坤,张广军.基于共线特征点的摄像机镜头畸变校正[J].机械工程学报,2006,42(9):174-177.
[11] 郑毅,刘上乾.利用直线特征的定标图像非线性畸变校正[J]. 仪器仪表学报,2007,28(6):1129-1133.
[12] 李欢,孙茂印,汤晓安,等.一种新的基于规则点阵的图像畸变校正方法[J]. 仪器仪表学报,2004,25(4):581-582.
[13] 周富强 蔡斐华. 基于非量测畸变校正的摄像机标定方法[J].机械工程学报,2009,45(8):228-232. |
|
|
|