|
|
The Blade Surface Measurement Programming and Error Processing Skill |
LIN Xiao-jun,LI Yi-ming,LI Zheng-hui,GAO Chun |
The Key Laboratory of Contemporary Design and Integrated Manufacturing Technology,Northwest Polytechnical University, Xi’an, Shaanxi 710072, China |
|
|
Abstract To investigate the measurements of aero-engine blades using coordinate measuring machine(CMM), automatic measurement programming and error processing were studied. Based on CAD model of blade, a method to extract the theoretical coordinates of the measured point was proposed, and with micro-plane theory the normal vector was also calculated in this method. ICP algorithm was used to eliminate systematic errors during data processing, and then the surface error of blade was obtained. Finally the program to calculate the coordinate and vector of measured point, as well as the program for surface matching were developed. Practical example verified the validity and reliability of the proposed method.
|
|
|
|
|
[1]周保珍,平雪良,龚玉玲,等.基于CAD模型的复杂曲面三坐标自动测量[J].机床与液压,2008,36(4):125-127.
[2]平雪良.灰色系统理论及其在逆向工程数据测量与处理中的应用[D].南京:南京航空航天大学,2005.
[3]刘勇,吕彦明,童鹏鹏.基于UGCAD模型的CMM自动测量路径规划[J].工具技术,2011,(1):88-91.
[4]彭育辉,高诚辉,何炳蔚. 基于遗传算法和四元数法的曲面线扫描数据的配准[J].福州大学学报,2008,36(4):541-546.
[5]杨现辉,王慧南.ICP算法在3D点云配准中的应用研究[J].计算机仿真,2010,27(8):235-238.
[6]Teng Shuxin, lv Yanming. Measurement and Analysis of Tooth Profile of Turbine Blade Root with CMM[J]. Tool Engineering, 2010,44(12):91-94.
[7]Blais G, Levine M D. Registering multiview range data to create 3D computer graphics[J]. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1995, 17(8): 820-824.
[8]Okatani I S, Deguchi K. A method for fine registration of multiple viewing rang images considering the measurement error properties[C]// Proceedings. 15th International Conference on Pattern Recognition, 2000,Barcelona,Spain, 2000, 280-283.
[9]Tao-Hsien Hsu, Jiing-Yih Lai, Wen-Der Ueng. On the development of airfoil section inspection and analysis technique[J]. Int J Adv Manuf Technol, 2006,30(1-2): 129–140.
[10]蔺小军. 基于PC-DIMS 的测量机脱机编程[M]//海克斯康.2006年度坐标测量机应用技术论文集.海克斯康测量技术(青岛)有限公司,2006,31-34.
[11]李桂花,孙绍彬.基于微平面法的空间曲面在线检测的研究[J].控制与检测,2008,(8):68-74.
[12]刘元朋,刘晶,张力宁,等.复杂曲面测量数据最佳匹配问题研究[J].中国机械工程,2005,16(12):1080-1082.
[13]Horn B B P. Closed-form solution of absolute orientation using unit quaternion[J]. Optical Society of America, 1987,44(4):629-642. |
|
|
|