|
|
|
| Study on Tobocco Critical Flow Orifice |
| JIANG Zhi-cai1,SU Zhong-di2,HAN Bin2,YIN Zhao-qin2,DING Xue1,FANG Ting1 |
1. China Tobacco Zhejiang Industrial Co., Ltd, Hangzhou, Zhejiang 310000, China;
2. College of Metrology Technology & Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China |
|
|
|
|
Abstract To measure draw resistance of cigarette and pressure drop of filter better, a new perspective based on computational fluid dynamics(CFD) about critical flow orifice is studied. Three dimensional numerical simulation with the finite volume method and Realizable k-ε model has been carried out in order to get the internal flow phenomenon in critical flow orifice. Further research is conducted from the three parts: theoretical analysis, numerical simulation and experimental. Experimental data is compared with the experimental data of the volume flow rate of the critical flow orifice inlet which is measured in China Tobacco Zhejiang standardized laboratory, from the comprehensive analysis, CFO can maintain a constant volume flow rate at its front.
|
|
|
|
|
|
［1］GB/T 16447—2004调节和测试的大气环境［S］.
［2］GB/T 18767—2002卷烟吸阻和滤棒压降标准条件和测量［S］.
［3］刘丁伟,胡建军,熊燕,等. 总粒相物与烟支重量、吸阻和抽吸口数的相关分析、通径分析 ［J］.烟草科技/烟草工艺, 2005,(8): 3-5.
［4］宋旭艳,尤庆亮,罗诚浩,等. 新型选择性减害滤棒的研制 ［J］. 烟草科技/烟草工艺, 2008,(12): 14-18.
［5］倪建彬.卷烟吸阻稳定性的研究［D］. 咸阳:西北农林科技大学,2008.
［6］Benson J M, Hawk C E. Testing small orifices ［J］. Instruments and Control Systems, 1960, 33:996-998.
［7］Kim J H, Kim H D, Park K A. Computational/experimental study of a variable critical nozzle flow ［J］. Flow Measurement and Instrumentation, 2006, 17:81-86.
［8］Halder M R, Dash S K, Som S K. Initiation of air core in a simplex nozzle and the effects of operating and geometrical parameters on its shape and size ［J］. Experimental Thermal and Fluid Science, 2002, 26: 871-878.
［9］Halder M R, Dash S K , Som S K. Influence of nozzle flow and nozzle geometry on the shape and size of an air core in a hollow cone swirl nozzle［J］. Journal of Mechanical Engineering Science, 2002, 217:207-217.
［10］任静霞,曾波,孟庆华,等. 标准恒流孔的研究 ［J］. 烟草科技/设备与仪器, 2004,（10）: 15-17.
［11］CORESTA RECOMENDED METHOD No41. Determination of the draw resistance of cigarettes and filter rods［S］. 2007. |
|
|
|
2013, Vol. 34 
