Research on Traceability Methods for the Voltage Divider Ratio of Standard DC High-Voltage Dividers Based on Distributed Synchronous Data Acquisition Technique

LI Rui, WANG Jiafu, ZHANG Di, CAI Jinhui, SHAO Haiming, WANG Kun, LI Chuansheng, WANG Lixin

Acta Metrologica Sinica ›› 2026, Vol. 47 ›› Issue (3) : 449-458.

PDF(2594 KB)
PDF(2594 KB)
Acta Metrologica Sinica ›› 2026, Vol. 47 ›› Issue (3) : 449-458. DOI: 10.3969/j.issn.1000-1158.2026.03.17

Research on Traceability Methods for the Voltage Divider Ratio of Standard DC High-Voltage Dividers Based on Distributed Synchronous Data Acquisition Technique

Author information +
History +

Abstract

The measurement of the voltage coefficient of the division ratio of a DC high-voltage divider is a critical step in the metrological traceability of standard DC high-voltage dividers. A division-ratio traceability method based on distributed synchronous data acquisition is proposed, and a dedicated measurement system is developed to realize the proposed approach. Using the above method and system, three ±100 kV DC high-voltage dividers that can be connected in series were used to verify the effectiveness of the new traceability method at -300 kV. The experimental results show that compared with the direct comparison method, the relative error of the new traceability method is no more than 0.006%, with an uncertainty of U rel =3.7×10-4k=2, and the E n value comparison result of the two methods is 0.15. This system can also be used to monitor the leakage current of the divider during use in a simple and efficient manner. For the ±300 kV series DC high-voltage divider calibrated in the experiment, the difference between the top and bottom currents of the divider at each voltage measurement point is no more than 0.007%.

Key words

electrical measurement / DC high-voltage divider / distributed synchronous sampling / leakage current / voltage ratio / metrological traceability

Cite this article

Download Citations
LI Rui , WANG Jiafu , ZHANG Di , et al . Research on Traceability Methods for the Voltage Divider Ratio of Standard DC High-Voltage Dividers Based on Distributed Synchronous Data Acquisition Technique[J]. Acta Metrologica Sinica. 2026, 47(3): 449-458 https://doi.org/10.3969/j.issn.1000-1158.2026.03.17

References

[1]
翟少磊, 罗奕, 段怡, 等. 直流分压器暂态温升及冷却特性研究[J]. 高压电器202359(3): 140-149.
ZHAI S L LUO Y DUAN Y, et al. Study on Transient Temperature-rise and Cooling Characteristic of DC Voltage Divider[J]. High Voltage Apparatus202359(3): 140-149.
[2]
费烨, 王晓琪, 汪本进,等. ±1000 kV特高压直流互感器的选型与研制[J]. 高电压技术201036(10): 2380-2387.
FEI Y WANG X Q WANG B J, et al. Development on ±1000 kV UHVDC instrument transformer[J]. High Voltage Engineering201036(10): 2380-2387.
[3]
王奇, 谭炳源, 刘青松, 等. ±800 kV直流分压器校准分析计算模型研究与应用[J]. 高压电器201753(12): 163-167.
WANG Q TAN B Y LIU Q S, et al. Calibration Model for ±800 kV DC Divider[J]. High Voltage Apparatus201753(12): 163-167.
[4]
刘方明, 肖凯, 王海燕, 等. 关于表计输入阻抗在直流高压分压器检定校准中的影响分析[J]. 计量学报202344(5): 771-776.
LIU F M XIAO K WANG H Y, et al. The Influence of Digital Multimeter Input Impedance in DC High Voltage Dividers Measurement[J]. Acta Metrologica Sinica202344(5): 771-776.
[5]
林艳, 潘洋, 糜坚平. 直流高压标准装置国际近况[J]. 上海计量测试201138(4): 9-12.
LIN Y PAN Y MI J P. Review on the development of international study on standard instrument for the directcurrent high voltage measurement[J]. Shanghai Institute of Measurement and Testing Technology201138(4): 9-12.
[6]
KNIGHT R B D Martin P. A high voltage divider having an uncertainty of 5 mV/kV at 100 kV[J]. IEEE Transactions on Instrumentation and Measurement199342(2): 568~570.
[7]
KARPLUS W J. Design and error analysis of high-accuracy de voltage-measuring systems[J]. IEEE Transactions on Instrumentation and Measurement196413(2): 139-145.
[8]
LI Y MIYURU K E EMMS S F, et al. Development of precision DC high-voltage dividers[J]. IEEE Transactions on Instrumentation and Measurement201160(7): 2211-2216.
[9]
李前.高压直流电压计量标准和现场量值传递方法的研究[D].武汉:华中科技大学,2012.
[10]
刘开培, 李登云, 朱凯, 等. 基于2/1自校准法的1kV直流电压比例标准量值溯源[J]. 高电压技术202248(6): 2226-2233.
LIU K P LI D Y ZHU K, et al. Traceability of 1 kV DC Voltage Ratio Based on 2/1 Self-calibration Method[J]. High Voltage Engineering202248(6): 2226-2233.
[11]
LI D Y LIU K P LEI M, et al. Study on the ratio change measurement of 1000 kV HVDC divider based on improved DC voltage summation method[J]. High Voltage20205(2): 202-208.
[12]
雷民, 姜春阳, 李登云, 等. 高电压比例标准装置技术综述 [J]. 高电压技术202147(6): 1893-1904.
LEI M JIANG C Y LI D Y,et al. Review of High Voltage Ratio Standard Devices Technology[J]. High Voltage Engineering202147(6): 1893-1904.
[13]
KIM K T LEE S H JUNG J K, et al. Method to determine the voltage coefficient of a DC high-voltage divider[J]. IEEE Transactions on Instrumentation and Measurement200352(2): 469-473.
[14]
唐海涛, 王晓飞, 王家福, 等. 基于云服务的高压直流分压器远程校准系统[J].计量科学与技术202266(4): 120-124+73.
TANG H T WANG X F WANG J F, et al. Cloud-Based Remote Calibration System for High Voltage DC Voltage Dividers[J]. Metrology Science and Technology202266(4): 120-124+73.
[15]
蔡俊, 陈晓烽, 吴思汉,等. 基于STM32的电机振动信号采集检测系统[J]. 传感器与微系统201938(11): 108-110.
CAI J CHEN X F WU S H, et al. Motor vibration signal acquisition and detection system based on STM32 [J] Transducer and Microsystem Technologies201938(11): 108-110.
[16]
胡知川. 基于Golang和Android的电力巡检平台智能化研究和实现[D]. 武汉:武汉科技大学, 2017.
[17]
张煌辉, 林飞鹏, 邵海明, 等. 直流高压电阻分压器泄漏电流测量研究[J]. 计量学报201839(1): 83-88.
ZHANG H H LIN F P SHAO H M, et al. Research on Measuring Leakage Current of DC High-voltage Resistive Divider[J]. Acta Metrologica Sinica201839(1): 83-88.
PDF(2594 KB)

Accesses

Citation

Detail

Sections
Recommended

/