Research on High Frequency Reciprocating Friction System and Motion Control Strategy

YIN Li; HUANG Lu; SUN Miao; CHEN Shaohua; YANG Jiahui; CAI Jinhui; YAO Yan

doi:10.3969/j.issn.1000-1158.2025.05.15

PDF(3032 KB)

Acta Metrologica Sinica ›› 2025, Vol. 46 ›› Issue (5) : 723-729. DOI: 10.3969/j.issn.1000-1158.2025.05.15

Research on High Frequency Reciprocating Friction System and Motion Control Strategy

YIN Li ¹^,² ,
HUANG Lu ² ,
SUN Miao ² ,
CHEN Shaohua ³ ,
YANG Jiahui ¹^,² ,
CAI Jinhui ¹ ,
YAO Yan ¹

Author information +

History +

Abstract

To promote the localization process of the high frequency reciprocating friction and wear testing machine， using the research of high frequency reciprocating friction system， carry out the high frequency reciprocating friction and wear in the process of stable and drive control technology research. By establishing the vibration simulation model under friction resistance， the control process of high-frequency reciprocating motion was simulated， and the actual motion control strategy was optimized. On the basis of the above， friction and wear experiments under different working conditions were carried out. The results show that the self-developed motion control strategy can achieve stable displacement output， and the displacement indication error under typical test conditions is less than ±2%. The friction coefficient value is compared with the current international leading high-frequency reciprocating friction and wear equipment， and the difference between the two values is less than 1%.

Key words

mechanical metrology / friction and wear testing machine / high-frequency reciprocating motion / adaptive control of vibration signal / friction and wear / friction coefficient

Cite this article

EndNote

Ris (Procite)

Bibtex

Download Citations

YIN Li , HUANG Lu , SUN Miao , et al . Research on High Frequency Reciprocating Friction System and Motion Control Strategy[J]. Acta Metrologica Sinica. 2025, 46(5): 723-729 https://doi.org/10.3969/j.issn.1000-1158.2025.05.15

References

List( Publishing order | Descend order by publishing year | Descend order by cited within ) Chart analysis

1	王超会，王典亮，王铀. 硫化物自润滑涂层的制作方法及其前景展望［J］. 热加工工艺， 2005（11）： 75-77. WANG C H， WANG D， WANG Y. Preparation method and prospect of sulfide self-lubricating coating［J］. Hot Working Technology， 2005（11）： 75-77. Cited in this article [1]

2	张嗣伟. 摩擦学的进展与展望［J］. 摩擦学学报， 1994， 14（1）： 84-88. ZHANG S W. Recent Advances in Tribology and Future Trends［J］. Tribology， 1994， 14（1）： 84-88 Cited in this article [1]

3	HAN Y， WANG J， LI W， et al. Oil film variation and surface damage in the process of reciprocation-oscillation transformation［J］. Tribology International， 2019， 140（1）： 105827-105828. Cited in this article [1]

4	Srivastava V K， Parshant K， Till Q， et al. Friction and wear behavior of GNPs functionalized carbon fiber reinforced polymer matrix composites under high-frequency reciprocating conditions［J］. Materials Research Express， 2020， 6（12）： 125355-125357.

5	CHEN H， LEE S， ZHENG X， et al. Evaluation of unlubricated wear properties of plasma-sprayed nanostructured and conventional zirconia coatings by SRV tester［J］. Wear， 2005， 260（9）： 1053-1060. Cited in this article [1]

6	向晓汉. 往复式摩擦试验机的研制及摩擦试验［D］. 无锡：江南大学， 2005. Cited in this article [1]

7	王泽爱. 油脂润滑对钢材料微动磨损的影响及其作用机理研究［D］. 成都：西南交通大学， 2010. Cited in this article [1]

8	潘俊锋. 重负荷往复摩擦磨损试验机关键技术研究［D］. 合肥：合肥工业大学， 2015. Cited in this article [1]

9	朱峰，徐久军，孙健，等. 松孔镀铬缸套磨损机理研究［J］. 内燃机学报， 2017， 35（3）： 274-279. ZHU F， XU J J， SUN J， et al. Wear Mechanism of Loose-hole chrome-plated Cylinder Liner［J］. Transactions of CSICE， 2017， 35（3）： 274-279. Cited in this article [1]

10	郝飞. 基于柔性梁的往复式摩擦磨损试验机的结构优化与测控系统设计［D］. 淮南：安徽理工大学， 2020. Cited in this article [1]

11	李研. 往复式摩擦磨损试验机设计［D］. 青岛：中国石油大学（华东）， 2020. Cited in this article [1]

12	雷爱莲，宋萱仪，王爱香，等. 用SRV试验机评价柴油机油摩擦磨损性能［J］. 润滑与密封， 2020， 45（2）： 135-140. LEI A L， SONG X Y， WANG A X， et al. Evaluation of Friction and Wear Performance of Diesel Engine Oil using SRV Testing Machine［J］. Lubrication & Seals， 2019， 45（2）： 135-140. Cited in this article [1]

罗海棠，孔晓伟，卢智聪，等. SRV摩擦磨损试验机在发动机油及车辆齿轮油研究中的应用［J］. 合成润滑材料， 2022， 49（1）： 13-17.

LUO

H T

， KONG

X W

， LU

Z C

， et al. Application of SRV Friction and wear testing Machine in the Research of Engine Oil and Vehicle Gear oil［J］. Journal of Synthetic Lubrication Materials， 2019， 49（1）： 13-17.

Cited in this article [1]

14	刘恩，郭纯. 摩擦磨损试验机研究综述［J］. 现代制造技术与装备， 2020， 56（12）： 35-36. LIU E， GUO C. Review of research on Friction and Wear Testing Machines［J］. Modern Manufacturing Technology and Equipment， 2019， 56（12）： 35-36. Cited in this article [1]

15	YAN H， XU Z， LU J， et al. A Reciprocating Motion Control Strategy of Single-Cylinder Free-Piston Engine Generator［J］. Electronics， 2020， 9（2）： 244-245. Cited in this article [1]

16	蒋强. 浅析直线电机控制的技术与应用分析［J］. 科技展望， 2016， 26（33）： 99. JIANG Q. Analysis on Technology and Application of linear Motor Control［J］. Science and Technology Outlook， 2016， 26（33）： 99.

17	JIA B， ZUO Z， FENG H， et al. Effect of closed-loop controlled resonance based mechanism to start free piston engine generator： Simulation and test results［J］. Applied Energy， 2016， 164（15）： 532-539. Cited in this article [1]

18	仇静. 基于PID的直线电机控制方法及实验研究［D］. 合肥：合肥工业大学， 2015. Cited in this article [1]

19	Alter D M， Tsao T C. Stability of turning processes with actively controlled linear motor feed drives［J］. ASME Journal of Engineering for Industry， 1994， 116（3）： 298-307. Cited in this article [1]

20	郝飞，何涛，王传礼，等. 往复式摩擦磨损试验机的振动分析与优化［J］. 科技通报， 2019， 35（11）： 63-66. HAO F， HE T， WANG C L， et al. The vibration analysis and optimization of the reciprocating friction and wear testing machine［J］. Science and technology， 2019， 35 （11）： 63-66. Cited in this article [1]

21	Lakhlani B， Yadav H. Development and Analysis of an Experimental Setup of Spring-Mass-Damper System［J］. Procedia Engineering， 2017（173）： 1808-1815. Cited in this article [1]

22	艾金婷，富立，郑玉. 库仑摩擦对机械振动的影响［J］. 长春理工大学学报（自然科学版）， 2014， 37（2）： 49-52. AI J T， FU L， ZHENG Y. Effect of Coulomb Friction on Mechanical Vibration［J］. Journal of Changchun University of Science and Technology （Natural Science Edition）， 2014， 37（2）： 49-52. Cited in this article [1]

23	Morales A C. Complete results for free and forced vibrations of inerter-added one-degree-of-freedom systems［J］. Journal of Vibroengineering， 2019， 21（6）： 1564-1573. Cited in this article [1]

24	GAO G. A new single degree-of-freedom resonance device［J］. Journal of Central South University， 2012， 19（10）： 2782-2787. Cited in this article [1]