基于点云精简的大型环锻件外形尺寸测量方法

doi:10.3969/j.issn.1000-1158.2023.07.03

Abstract
Figure/Table
References (17)
Related Citation (15)

Download: PDF (28796 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Aiming at the problems of large amount of point cloud data and low quality of point cloud grid in the measurement of large ring forgings, a simplified point cloud measurement algorithm was proposed. Firstly, the target Gaussian curvature of the interior points and boundaries of each vertex on the forging mesh was set to zero.Then, according to the set target curvature, the Ricci flow equation was used to optimize the Ricci flow discrete entropy energy, and the planar target metric was calculated to obtain the parameterized coordinates of each point on the mesh.Finally, the vertex dimension was extended based on the obtained parametric coordinates, and a vertex constraint factor weighted cost function was introduced for mesh simplification measurements.The experimental results showed that the proposed algorithm could handle point cloud models with complex structures, and the simplified point cloud model boundary geometric features were well maintained, which could meet the measurement dimensional accuracy requirements of industrial digital manufacturing.

Key words： metrology dimension measurement ring forging point cloud simplification Ricci flow QEM algorithm

Received: 28 January 2023 Published: 17 July 2023

PACS:

TB92

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Yu-cun
	WANG Zhi-yu
	FU Xian-bin

Cite this article:

ZHANG Yu-cun,WANG Zhi-yu,FU Xian-bin. Measurement Method of Large Ring Forgings Based on Point Cloud Simplification[J]. Acta Metrologica Sinica, 2023, 44(7): 1027-1032.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2023.07.03 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2023/V44/I7/1027

［10］	魏子衿, 肖丽. 改进顶点聚类方法的并行核外模型简化算法［J］. 计算机工程与应用, 2018, 54(13): 181-190.
［2］	孔德明, 田小强, 崔永强, 等. 逆向工程中圆锥体组件加工信息快速高精度检测与生成方法研究［J］. 计量学报, 2022, 43(6): 719-724.
［13］	Yao L, Huang S, Xu H, et al. Quadratic Error Metric Mesh Simplification Algorithm Based on Discrete Curvature［J］. Mathematical Problems in Engineering, 2015, 8: 1-7.
［17］	Fu X B, Miao S, Zhang Y C, et al. A new method of processing laser scanning data of radial section dimensions for ring forgings［J］. Measurement, 2020, 153: 107430.
［1］	孔涛. 基于拓扑同胚变换的复杂环形锻件自由曲面特征提取方法研究［D］. 秦皇岛: 燕山大学, 2019.
［8］	吴俊豪, 李琛, 王蓉, 等. 基于密度聚类和圆外切线斜率拟合的埋地排水管道声呐点云去噪技术［J］.计量学报, 2023, 44(2): 231-237.
［16］	李世俊, 姜晓彤, 唐慧. 保持细节特征的带纹理模型的高质量简化算法［J］. 计算机应用研究, 2020, 37(1): 300-303.
	Kong D M, Tian X Q, Cui Y Q, et al. Research on rapid high-precision detection and generation for machining information of cone component in reverse engineering［J］. Acta Metrologica Sinica, 2022, 43(6): 719-724.
［4］	Schuster H F. Segmentation of Lidar Data using the Tensor Voting Framework［J］. International Archives of Photogrammetry Remote Sensing & Spatial Information Sciences, 2004, 35(3): 1073-1078.
［6］	唐泽宇, 高保禄, 窦明亮. 基于加权最小二乘法曲率计算的点云精简算法［J］. 计算机工程与设计, 2019, 40(6): 1606-1610.
［9］	Rossignac J, Borrel P. Multi-resolution 3D approximations for rendering complex scenes［M］. Modeling in Computer Graphics: Methodsand Applications, 1993, 455-465.
［15］	Ozaki H, Kyota F, Kanai T. Out-of-core framework for QEM-based mesh simplification［J］. Eurographics Association, May 2015, 10: 87-96.
［5］	常俊飞, 赵利民, 王瀚斌. 基于边界保留的k-means聚类点云精简算法研究［J］. 测绘工程, 2018, 27(7): 60-65.
	Tang Z Y, Gao B L, Dou M L. Point clouds simplification algorithm based on weighted least squares surface fitting for curvature computation［J］. Computer Engineering and Design, 2019, 40(6): 1606-1610.
	Wei Z J, Xiao L. Parallel out-of-core model simplification algorithm based on improved vertex clustering［J］. Computer Engineering and Applications, 2018, 54(13): 181-190.
［11］	Hoppe H, Derose T, Duchamp T, et al. Mesh Optimization［C］// Proceedings of the 20th Annual Conference on Computer Graphics and Interactive Techniques. Seattle, Washington, USA, 1993.
［14］	Zhang Y C, Wu M L, Fu X B, et al. Reduced algorithm of laser measurement data for geometric parameters of ring forgings based on Artificial Immune Algorithm［J］. Measurement. 2019, 134: 527-538.
［3］	Sun W, Bradley C, Zhang Y F, et al. Cloud data modelling employing a unified, non-redundant triangular mesh［J］. Computer-Aided Design, 2001, 33(2): 183-193.
	Chang J, Zhao L, Wang H, et al. Research on k-means clustering point cloud reduction algorithm based on boundary reservation［J］. Engineering of Surveying and Mapping, 2018, 27(7): 60-65.
［7］	Gao Y, Ping C, Wang L, et al. A Simplification Method for Point Cloud of T-Profile Steel Plate for Shipbuilding［J］. Algorithms, 2021, 14(7): 202-213.
	Wu J H, Li C, Wang R, et al. The slope fitting method of sonar point cloud on the inner wall of sewer based on density algorithm and tangent slope fitting of the circle［J］. Acta Metrologica Sinica, 2023, 44(2): 231-237.
［12］	Garland M, Heckbert P S. Surface simplification using quadric error metrics［C］// The 24th annual conference on Computer graphics and interactive techniques. Los Angeles, USA, 1997.
	Li S J, Jiang X T, Tang H. High-quality simplified algorithm of texture model for detailed features preserving［J］. Application Research of Computers, 2020, 37(01): 300-303.