基于改进型两次平衡对检法的感应分压器自校准方法

doi:10.3969/j.issn.1000-1158.2022.05.13

Abstract
Figure/Table
References (16)
Related Citation (15)

Download: PDF (731 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The design method of reference voltage transformer and null detection transformer was introduced. The influence of leakage current between shielding of the transformers was analyzed. The classic incremental buildup calibration method was improved. Both the reference voltage and voltage difference measurement circuit got equipotential protection in zero balance and section voltage balance measurement procedures. The process of self-calibration method was derived. Calibration result was only related to the voltage difference measured by the lock-in amplifier during two balance procedures. The influences of reference voltage transformer, null detection transformer, auxiliary transformer and leakage current between shielding were removed. The calibration results of 1kV inductive voltage divider was presented, and the measurement uncertainty was evaluated, the relative expanded uncertainty was 5.4 × 10^-8(k=2).

Key words： metrology;inductive voltage divider incremental buildup calibration method self-calibration reference voltage leakage between shielding uncertainty

Received: 16 August 2021 Published: 18 May 2022

PACS:

TB971

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	FENG Jian
	SUN Jian
	PAN Yang

Cite this article:

FENG Jian,SUN Jian,PAN Yang. Self-calibration Method of Inductive Voltage Divider Based on Improved Incremental Buildup Method[J]. Acta Metrologica Sinica, 2022, 43(5): 643-648.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2022.05.13 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2022/V43/I5/643

［1］Avramov S, Oldham N M, Jarrett D G, et al. Automatic Inductive Voltage Divider Bridge for Operation from 10 Hz to 100 kHz［J］. IEEE Transactions on Instrumentation & Measurement, 2002, 42(2):131-135.
［2］杨雁, 黄璐, 王维,等. NIM新一代二端对电容电桥装置［J］. 计量学报, 2020,41(3):284-289.
Yang Y, Huang L, Wang W, et al. The new two terminal-pair capacitance bridge at NIM［J］. Aata Metrologica Sinica, 2020,41(3):284-289.
［3］许峰, 冯建, 孙健,等. 高准确度有源双级感应分压器的研制［J］. 中国计量, 2019(5):83-85.
Xu F, Feng J, Sun J, et al. Development of high accuracy active two-stage inductive voltage divider［J］. China Metrology, 2019(5):83-85.
［4］冯建, 胡俊杰, 胡斌. 交流注入式电池内阻测试仪电阻参数的校准方法［J］. 计量学报, 2020, 41(5):83-87.
Feng J, Hu J J, Hu B. Calibration Method for AC Internal Resistance Measurement Function of Battery Testers［J］. Acta Metrologica Sinca, 2020, 41(5):83-87.
［5］Small G W, Budovsky I F, Gibbes A M, et al. Precision three-stage 1000V/50 Hz inductive voltage divider［J］. IEEE Transactions on Instrumentation & Measurement, 2005, 54(2):600-603.
［6］Zhao J, Yan Y, Lu Y, et al. An improved bootstrap method for the calibration of inductive voltage dividers［C］//IEEE. 2012 Conference on Precision Electromagnetic Measurements. 2012.doi:10.1109/CPEM.2012.6251133.
［7］JJG 244—2003 感应分压器检定规程［S］.
［8］Feng J,Pan Y, Lai L, et al. Incremental Buildup Calibration Method of Inductive Voltage Divider［C］//IEEE. 2020 Conference on Precision Electromagnetic Measurements.2020.doi:10.1109/CPEM49742.2020.9191690.
［9］Feng J, Lai L, Shi L B, et al. Two calibration methods for inductive voltage divider［C］// IEEE.2014 Conference on Precision Electromagnetic Measurements.2014.doi:10.1109/CPEM.2014.6898508.
［10］王维, 刘夏, 张欣. 1000V多盘感应分压器标准建立［J］. 计量学报, 2020,41(7):852-856.
Wang W, Liu X, Zhang X. Research on 1000V Multi-decade Inductive Voltage Divider Standard［J］. Acta Metrologica Sinica, 41(7):852-856.
［11］Sze W C, Dunn A F, Zapf T L. An International Comparison of Inductive Voltage Divider Calibrations at 400 and 1000Hz［J］. IEEE Transactions on Instrumentation and Measurement, 1965, IM-14(3):124-131.
［12］冯建, 石雷兵, 刘文芳,等. 二进制感应分压器及其在高速采样器线性度校准中的应用［J］. 电测与仪表, 2013, 50(11A):112-114.
Feng J, Shi L B, Liu W F, et al. Binary Inductive Voltage Divider and its Application in Calibration of the Linearity of Wideband Digitizer［J］. Electrical Measurement & Instrumentation, 2013, 50(11A):112-114.
［13］任士焱, 张智杰, 周术,等. 电流比较仪磁屏蔽效能的计算［J］. 计量学报, 2003, 24(4):321-324.
Ren S Y, Zhang Z J, Zhou S, et al. Calculation of Magnetic Shielding Effectiveness of Current Comparator［J］. Acta Metrologica Sinica, 2003, 24(4):321-324.
［14］李龙女, 李岩, 井永腾,等. 电力变压器漏磁场与杂散损耗计算的研究［J］. 电工技术学报, 2013, 28(S2):122-127.
Li L N, Li Y, Jing Y T, et al. Research of Leakage Magnetic Field and Stray Loss Calculation in Power Transformer［J］. Transactions of China Electrotechnical Society, 2013, 28(S2):122-127.
［15］宋文涛,陈川,周新华. 实负荷下容性泄漏对标准电能计量的影响分析［J］. 计量科学与技术,2021, 65(8): 71-75 .
Song W T, Chen C, Zhou X H. Influence of Capacitive Leakage on Electric Energy Measurement with a Standard Meter Under Real-Load Conditions［J］. Metrology Science and Technology, 2021, 65(8): 71-75 .
［16］刘罡, 姜春阳, 曾辉. 工频电压比例标准多盘感应分压器校准线路分析及校准结果不确定度评定［J］. 东北电力技术, 2017, 38(11):60-62.
Liu G, Jiang C Y, Zeng H. Circuit Analysis and Uncertainty Evaluation of Multiple Winding Inductive Voltage Divider for Apparatus of Voltage Ratio Standards at Power Frequency［J］. Northeast Electric Power Technology, 2017, 38(11):60-62.