［1］IEC 60618 Inductive voltage dividers［S］.  1978.
［2］Small G W, Budovsky I F,  Gibbes A M, et al.Precision Three-stage 1000 V/50 Hz Inductive Voltage Divider［J］. IEEE Trans. Instrum. Meas., 2005, 54(2):600-603.
［3］BudovskyI  F, Small G W,  Gibbes A M,  et al. Calibration of 1000 V/50 Hz Inductive Voltage Dividers and Ratio Transformers［C］// CPEM 2004. London, 2004: 322-323.
［4］何小兵. 基于参考电势法校验感应分压器的几种校验方法综述与分析［C］// 第4届全国电磁计量大会. 桂林, 2007.

［5］Wang W. Establishing of 1000 V Multi-decade Inductive Voltage Divider Standard at NIM［C］// Proc CPEM 2016. Ottawa, Canada, 2016.
［6］Zhao J, Yang Y, Lu Y,  et al. An Improved Bootstrap Method for the Calibration of Inductive Voltage Dividers［C］// CPEM 2012. Washington D.C., 2012: 690-691.
［7］王雪,郑天宇,项琼, 等.气隙对电流比较仪磁屏蔽屏蔽效能影响的研究［J］.  计量学报, 2018, 39(4): 549-553.
Wang X, Zheng T Y, Xiang Q, et al. Research on Air Gap Influence on Magnetic Shielding Effectiveness for Current Comparator［J］. Acta Metrologica Sinica, 2018, 39(4): 549-553.
［8］张煌辉,林飞鹏,邵海明, 等.直流高压电阻分压器泄漏电流测量研究［J］.  计量学报, 2018, 39(1): 83-88.
Zhang H H, Lin F P, Shao H M, et al. Research on Measuring Leakage Current of DC High-voltage Resistive Divider［J］. Acta Metrologica Sinica, 2018, 39(1): 83-88.
［9］Deacon T A . Accurate (2 parts in 107) inductive voltage divider for 20~200Hz［J］.Proceedings of the Institution of Electrical Engineers , 1970, 117(2):634-640.
［10］He X B, Zhang X. A new error compensation method of inductive voltage divider［C］//  Proc CPEM 2008. Colorado, USA, 2008:238-239.
［11］Homan D N, Zapf T L. Two stage, guarded inductive voltage divider for use at 100 kHz［J］.ISA Transactions, 1970, 9:201-209.
［12］Hanke R. An improved straddling method with triaxial guards for the calibration of inductive voltage dividers at 1592 Hz［J］. IEEE Trans Instrum Meas,1989, 38(5):974-978.
［13］Zhang G M, Zhao F Z. Generalized Injected Voltage Method for the Establishment of Multidecade Inductive Voltage Divider Standard［J］. IEEE Trans Instrum Meas,1987,36(1): 9-12.