|
|
|
| The New Vertical Calculable Cross-capacitor by Adoptingthe Novel Electrical Compensation Approach |
| HUANG Lu,YANG Yan,LU Zu-liang,WANG Wei |
| National Institute of Metrology, Beijing 100029, China |
|
|
|
|
Abstract To compensate the end effect error in a vertical calculable cross-capacitor (VCCC) with a fixed and a movable guard electrode, an electrical compensation approach is adopted by the National Institute of Metrology, China (NIM). After continuous improvements and modifications, the latest optimal hollow active auxiliary electrode (OHAAE) was developed, which was different from a nosepiece used by other national institutes of metrology in the world, and its electrical performances including the compensation effectiveness, eccentricity effect and so on were investigated on the NIMs model capacitor device.Instead of the nosepiece, the latest OHAAE was successfully applied and the relative standard uncertainty of the reproduction of 1 pF capacitance unit from the new NIMs VCCC was 1.0×10-8.
|
|
|
|
|
|
|
|
［1］Thompson A M, Lampard D G. A new theorem in electrostatics and its application to calculable standards of capacitance［J］. Nature, 1956, 177(4515): 888.
［2］周琨荔,屈继峰,张钟华,等. 交流量子电压标准研究综述［J］. 计量学报, 2017, 38(4): 486-491.
Zhou K L,Qu J F,Zhang Z H, et al . The Status of AC Quantum Voltage Standards［J］. Acta Metrologica Sinica, 2017, 38(4): 486-491.
［3］Clothier W K. A calculable standard of capacitance［J］. Metrologia, 1965, 1(2): 36-55.
［4］Jeffery A, Lee L H, Shields J Q. Model tests to investigate the effects of geometrical imperfections on the NIST calculable capacitor［J］. IEEE Trans Instrum Meas, 1999, 48(2):356–359.
［5］Small G W, Fiander J R. Design of a calculable cross-capacitor［C］// 2004 Conference on Precision Electrom-agnetic Measurements Digest. London, UK, 2004.
［6］Lu Z L, Huang L, Yang Y, et al. An initial reproduction of SI capacitance unit from a new calculable capacitor at NIM［J］. IEEE Trans Instrum Meas, 2015, 64(6): 1496-1502.
［7］张钟华,陆祖良.降低可动屏蔽型计算电容端部效应误差的一个新方法［J］.计量学报,1982, 3(4):250-258.
Zhang Z H, Lu Z L. A new method for reducing the end-effect error of the cross-capacitor with a movable guard rod［J］. Acta Metrologica Sinica, 1982, 3(4): 250-258.
［8］Huang L, Small G W, Lu Z L, et al. Model tests of electrical compensation method for the new calculable cross-capacitor at NIM［J］. IEEE Trans Instrum Meas, 2013, 62(6): 1789-1794.
［9］Huang L, Lu Z L, Yang Y, et al. A novel hollow active auxiliary electrode applied for the vertical calculable cross-capacitor at NIM［J］. IEEE Trans Instrum Meas, 2015, 64(6): 1657-1662.
［10］Huang L, Lu Z L, Yang Y, et al.The optimal hollow active auxiliary electrode and its additional functions research［C］// Proc CPEM Dig. Ottawa, Canada, 2016.
［11］Huang L, Yang Y, Lu Z L, J et al. Practical application of latest optimal hollow active auxiliary electrode in vertical calculable cross-capacitor at NIM［J］. IEEE Trans Instrum Meas, 2019, 68(6): 2144-2150.
［12］陆祖良, 黄璐, 杨雁, 等. 可动屏蔽型计算电容复现电容单位的方法研究［J］. 计量学报, 2014, 35(6): 521-527.
Lu Z L, Huang L, Yang Y, et al. Research for Reproducing SI Unit of Capacitance by the CaIcuIabIe Capacitor with a MovabIe Guard Rod［J］. Acta Metrologica Sinica, 2014, 35(6): 521-527.
［13］Wang J B, Qian J, Liu Z Y, et al. Displacement determination of the guard electrode for the new calculable capacitor at NIM［J］. IEEE Trans Instrum Meas, 2016, 65(11): 2569-2577. |
|
|
|
