动量式气体流量计内部流场特性与测量性能研究

doi:10.3969/j.issn.1000-1158.2019.01.20

Abstract
Figure/Table
References (14)
Related Citation (15)

Download: PDF (873 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The numerical simulation and experiments are used to research internal flow characteristics of momentum gas flowmeter. The changing characteristic of drag coefficient for force-summing element is obtained, the influence of the structure and installation of force-summing element on the measurement performance are studied. The research results show the drag coefficient of momentum gas flowmeter changes greatly and the relationship between drag coefficient and Reynolds should be fitted, the rectangular force-summing element should be selected first because the fitting formula of drag coefficient for rectangular force-summing element has the least error. The maximum error between fitting formula and experimental data is 0.32%. Research results also show the installation error of force-summing element is no more than 0.32% and has little influence on the measurement accuracy and the momentum flowmeter is suitable for on-line installation.

Key words： metrology momentum gas flowmeter drag coefficient numerical simulation flow field

Received: 29 September 2017 Published: 07 January 2019

PACS:

TB937

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Zheng-gang
	DU Guang-sheng
	LIU Li-ping

Cite this article:

LIU Zheng-gang,DU Guang-sheng,LIU Li-ping. Study on Internal Flow Field and Measurement Performance of Momentum Gas Flowmeter[J]. Acta Metrologica Sinica, 2019, 40(1): 124-129.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2019.01.20 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2019/V40/I1/124

［1］张婉萍, 李世武. 基于FLUENT的靶式流量计数值模拟与研究［J］. 煤气与电力, 2011, 31(4):14-18.
Zhang W P, Li S W. Numerical Simulation and Research on Target Flowmeter Based on FLUENT［J］. Gas & Heat, 2011, 31(4):14-18.
［2］吴玉柏,张华,黄勇,等. 动量式流量计的开发研究［J］. 河海大学学报(自然科学版), 2011, 39(2):186-189.
Wu Y B, Zhang H, Huang Y, et al. Development of momentum type flow meter［J］. Journal of Hohai University(Natural Sciences), 2011, 39(2):186-189.
［3］张华, 陈凤, 黄勇, 等. 基于动量守恒原理的量水设施-动量式流量计的研制［J］. 节水灌溉, 2012, 2(2): 5-8.
［4］Lua A C, Zheng Z S. Numerical simulations and experimental studies on a target fluidicflowmeter［J］. Flow Measurement and Instrumentation, 2003, 14(2):43-49.
［5］Stringam B L, Olsen J. Design and analysis of a swinging drag body flowmeter for irrigation pipe［J］. Irrigation and Drainage Systems, 2009,23(4): 173-180.
［6］吴林华, 尹文庆, 王川. 液态肥扭力靶式流量计的研制及试验研究［J］. 传感技术学报, 2017, 30(2):224-229.
Wu L H, Yin W Q, Wang C. Development and Experimental Study of a Torque TargetFlowmeter for Liquid Fertilizer［J］. Chinese Journal of Sensors and Actuators, 2017, 30(2):224-229.
［7］沈培璐, 蒋庆, 陈翠武. 新型电容式靶式流量计的设计［J］. 中国计量学院学报, 2010, 21(1):38-41.
Shen P L, Jiang Q, Chen C W. Design of a new type of target flowmeter based on differential capacitance［J］. Journal of China University of Metrology, 2010, 21(1):38-41.
［8］李明东, 李世武. 新型靶式流量计的设计与研究［J］. 工业仪表与自动化装置, 2014, 5(5):108-111.
Li M D, Li S W. Design and research of the new type of target flowmeter［J］. Industrial Instrumentation & Automation, 2014, 5(5):108-111.
［9］Zhao Y, Chen K, Jian Y. Novel target type flowmeter based on a differential fiber Bragg grating sensor［J］. Journal of the International Measurement Confederation, 2005, 38(3):230-235.
［10］唐静远, 陈建明, 吴伟龙, 等. 三声道燃油超声波流量计内部流场数值研究［J］. 计量学报, 2013, 34(6):561-566.
Tang J Y, Chen J M, Wu W L, et al. Numerical Study of the Internal Flow Field in Three-channel Fuel Ultrasonic Flow-meter［J］. Acta Metrologica Sinica, 2013, 34(6): 561-566.
［11］赵伟国, 赵雪松, 黄朝川. 小管径超声波流量计的仿真与设计［J］. 计量学报, 2012, 33(6):513-518.
Zhao W G, Zhao X S, Huang C C. Simulation and Design of the Small Pipe Ultrasonic Flowmeter［J］. Acta Metrologica Sinica, 2012, 33(6): 513-518.
［12］方敏,徐科军,汪伟, 等. 基于FPGA和DSP的气体超声流量计驱动和数字信号处理系统［J］. 计量学报, 2017,38(2): 200-204.
Fang M, Xu K J, Wang W, et al. A Driving and Digital Signal Processing System of Ultrasonic Gas Flow-meter Based on FPGA & DSP［J］. Acta Metrologica Sinica, 2017,38(2): 200-204.

［13］魏灿, 谭超, 董峰. 内锥式流量计数值模拟及优化设计［J］. 工程热物理学报, 2011, 32(7): 1165-1168.
Wei C, Tan C, Dong F. Numerical Simulation and Optimal Design for Cone Flowmeter［J］. Journal of Engineering Thermophysics, 2011, 32(7): 1165-1168.
［14］住房和城乡建设部. GB 50093—2013自动化仪表工程施工及质量验收规范［S］. 2013.