|
|
Study on Uncertainty Evaluation of Annual Performance Factor Based on Air-enthalpy Method |
HANG Chen-zhe1,2,XU Ding-hua2,MA Guo-yuan1,ZHANG Hai-yun1,2,TENG Jun-heng2 |
1. College of Environmental and Energy Engineering, Beijing University of Technology, Beijing 100124, China
2. Division of Energy and Environmental Measurement, National Institute of Metrology, Beijing 100029, China |
|
|
Abstract Based on air-enthalpy method model expressed in direct measurement parameters, the uncertainty of annual performance factor (APF) was evaluated using Monte Carlo method combined with GUM. As air-enthalpy method is nonlinear and GUM is only perfectly suitable for the linear model, the rated cooling capacity uncertainty and the rated heating capacity uncertainty obtained using GUM were verified primarily by MCM, and the differences between results obtained by GUM and MCM were lower than 2‰. On this basis, uncertainty results of five different measurement conditions were given, and these parameters were used as the inputs of simulation. The adaptive Monte Carlo method simulation flow chart of APF was given, and APF uncertainty of an air conditioner was evaluated, the result was 0.09 kW·h/(kW·h)(k=2).
|
Received: 25 February 2015
Published: 28 December 2016
|
|
|
|
|
[1]GB 21455—2013,转速可控型房间空气调节器能效限定值及能效等级[S].
[2]GB/T 7725—2004,房间空气调节器[S].
[3]张恺,张小松,陈向阳,等.空调器空气焓差法性能测试不确定度分析[J].流体机械,2006,34(11):72-75.
[4]李敏毅,刘定强,梁显有.空调器空气焓差法测量制冷(热)量方式及误差分析[J].实用测试技术,2002, (3):24-26.
[5]滕俊恒,杭晨哲,徐定华,等.空气焓值法制冷量测量的两种不确定度评定方法研究[J].计量学报,2011, 32(4):329-332.
[6]宋明顺,陈意华,陶靖轩,等.测量不确定度评定中忽略相关项所带来的风险评估[J].计量学报,2005,26(1):90-92.
[7]JJF 1261.4—2014, 转速可控型房间空气调节器能源效率标识计量检测规则[S].
[8]JJF 1059.2—2012,用蒙特卡洛法评定测量不确定度[S].
[9]张海滨,王中宇,刘志敏.测量不确定度评定的验证研究[J].计量学报,2007,28(3):193-197.
[10]Siebert B R L, Sibold D, Sommer K-D. The use of Monte Carlo techniques for metrology[C]∥NMIJ - BIPM Workshop on the Impact of Information Technology in Metrology,Japan, Tsukuba, 2005.
[11]陈晓怀,薄晓静,王宏涛.基于蒙特卡罗方法的测量不确定度合成[J].仪器仪表学报,2005,26(S1):759-761.
[12]崔孝海,曲璐.蒙特卡罗方法在微波功率测量不确定度分析中的应用[J].计量学报,2008,29(1):77-79. |
|
|
|