旋入式检验级测压器鉴选方法研究

doi:10.3969/j.issn.1000-1158.2014.04.08

Abstract
Figure/Table
References (9)
Related Citation (15)

Download: PDF (302 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The selection method using relative deviation to execute error processing is proposed to eliminate the fluctuation of stressors. With the crusher gauge of circumflex type with 1cm² and the conical copper cylinders withΦ6mm×9.8mm as the research objects, the test selecting are made for the testing-level crusher gauge of circumflex type. And with the analysis and treatment of the experimental data, the proposed assessment and the feasibility of the method has been validated. The results showe that the election method is more scientific and rational.

Key words： Metrology Testing-level crusher gauge of circumflex type Selection method Selection criterion

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Fang
	LI Jing
	KONG De-ren
	GAO Lu-peng

Cite this article:

WANG Fang,LI Jing,KONG De-ren, et al. Study on Selection Method for the Testing-level Crusher Gauge of Circumflex Type[J]. Acta Metrologica Sinica, 2014, 35(4): 339-343.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2014.04.08 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2014/V35/I4/339

［1］孔德仁, 狄长安, 范启胜. 塑性测压技术［M］. 北京:兵器工业出版社,2006,9-10.
［2］华东工学院《内弹道实验原理》编写组. 内弹道实验原理［M］. 国防工业出版社,1984,14-17.
［3］王昌明. 实用弹道学［M］. 北京:兵器工业出版社,1994,124-126.
［4］刘素洁. 测压铜柱的静态一致性及静动差研究［D］. 南京:南京理工大学. 2008.
［5］刘冰冰. 测压铜柱静态标定体制的研究［D］. 南京:南京理工大学. 2009.
［6］张超. 塑性测压器鉴选方法研究及实践［D］. 南京:南京理工大学. 2011.
［7］费业泰. 误差理论与数据处理［M］.第5版. 北京:机械工业出版社,2005,1-4.
［8］孔德仁, 朱蕴璞, 狄长安. 工程测试技术［M］. 北京:科学出版社,2004,107-109.
［9］邓欣伟. 内弹道的膛压检测方法研究［J］. 沈阳理工大学学报,2008,27(3):9-11.

[1]	XU Feng, LI Zhi-wei, FENG Jian. Analysis and Uncertainty Evaluation of Capacitance Measurement of Supercapacitors by Constant Current Discharge Method[J]. Acta Metrologica Sinica, 2020, 41(4): 489-493.