|
|
|
| Geometric Error Measurement and Identification for Rotary Table Using Double Ballbar |
| CHEN Jian-xiong1, LIN Shu-wen1, HAN Guo-qiang1, 2 |
1. School of Mechanical Engineering and Automatic, Fuzhou University, Fuzhou, Fujian 350108, China;
2. Fujian Institute of Research on the Structure of Matter, Chinese Academy of Science, Fuzhou, Fujian 350002, China |
|
|
|
|
Abstract The derivations of the center of the ball installed on the rotary table are measured by double ballbar with circular paths in the error sensitive directions. Hence, there are nine results measured from three mounting positions of the ball at the same rotation angle, to form four axis location and six motion errors identification model using homogeneous transformation. In addition, the condition number is applied to select the optimum installation parameters of the ballbar. Finally, the measurement and verification experiments are conducted on the four-axis machining center. All the elements of the geometric error can be identified by the proposed method from the measured results with high accuracy and measuring effectively. Then, comparing the predicted value from the identified errors with the measured results by ballbar, it shows that the absolute residual error is less than 0. 003 mm.
|
|
|
|
|
|
［1］ Schwenke H, Knapp W, Haitjema H, et al. Geometric error measurement and compensation of machines-An update ［J］. CIRP Annals-Manufacturing Technology, 2008, 57(2): 660-675.
［2］ 杨建国, 许黎明, 刘行, 等. 加工中心的几何误差和热误差综合补偿模型［J］. 计量学报, 2001, 22(2):90-94.
［3］ ISO 230-7. Test Code for Machine Tools-Part 7: Geometric accuracy of axes of rotation［S］. Geneva: International Organization for Standardization, 2011.
［4］ Tsutsumi M, Saito A. Identification and compensation of systematic deviations particular to 5-axis machining centers ［J］. International Journal of Machine Tools and Manufacture, 2003, 43(8): 771-780.
［5］ 张大卫, 商鹏, 田延岭, 等. 五轴数控机床转动轴误差元素的球杆仪检测方法［J］. 中国机械工程, 2008, 19(22): 2737-2741.
［6］ Lee K I, Lee D M, Yang S H. Parametric modeling and estimation of geometric errors for a rotary axis using double ball-bar ［J］. International Journal of Advanced Manufacturing Technology, 2012, 62(5): 741-750.
［7］ Lei W T, Hsu Y Y. Accuracy enhancement of five-axis CNC machines through real-time error compensation ［J］. International Journal of Machine Tools and Manufacture, 2003, 43(9): 871-877.
［8］ Weikert S, Knapp W. R-Test, a New Device for Accuracy Measurements on Five Axis Machine Tools［J］. CIRP Annals-Manufacturing Technology, 2004, 53(1):429-432.
［9］ Zargarbashi S H H, Mayer J R R. Single setup estimation of a five-axis machine tool eight link errors by programmed end point constraint and on the fly measurement with Capball sensor ［J］. International Journal of Machine Tools and Manufacture, 2009, 49(10): 759-766.
［10］ Suh S H, Lee E S, Jung S Y. Error modeling and measurement for the rotary table of five-axis machine tools ［J］. International Journal of Advanced Manufacturing Technology, 1998, 14(9): 656-663.
［11］ 王金栋, 郭俊杰, 费致根,等. 基于激光跟踪仪的数控机床几何误差辨识方法［J］. 机械工程学报, 2011,47 (14): 13-19.
［12］ 王一丁, 张国雄,臧艳芬,等. 数控加工中心的位置误差补偿模型［ J］. 计量学报, 1995, 16(3) : 200-205.
［13］ 李庆扬, 王能超, 易大义. 数值分析［M］. 北京: 清华大学出版社, 2008, 8-12. |
|
|
|
