2025年04月09日 星期三 首页   |    期刊介绍   |    编 委 会   |    投稿指南   |    期刊订阅   |    统合信息   |    联系我们
计量学报  2016, Vol. 37 Issue (5): 509-514    DOI: 10.3969/j.issn.1000-1158.2016.05.12
  力学计量 本期目录 | 过刊浏览 | 高级检索 |
优化HHT端点效应的新方法
赵军,李林峰,郭天太,王道档,孔明
中国计量学院计量测试工程学院, 浙江 杭州 310018
A New Method to Optimize Endpoint Effect in HHT
ZHAO Jun,LI Lin-feng,GUO Tian-tai,WANG Dao-dang,KONG Ming
College of Metrology & Measurement Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China
全文: PDF (2015 KB)   HTML (1 KB) 
输出: BibTeX | EndNote (RIS)      
摘要 在旋转机械的故障诊断中,希尔伯特-黄变换(HHT)方法常用于提取故障特征信号以及分解结果的时频分析,然而,在HHT中会出现端点效应问题,且导致模态混叠和虚假本征模态函数(IMF)等一系列问题。针对这一问题,提出了利用广义回归神经网络(GRNN)和边界局部特征尺度延拓(BLCC)相结合的方法先对信号延拓,再进行经验模式分解(EMD)。通过仿真与故障实验,在时域、频域和希尔伯特-黄谱的相关参数的情况下,对比镜像延拓优化的HHT分解结果,验证了所提方法的有效性。实验结果表明:所述方法能够有效地抑制HHT中的端点效应,且减轻了模态混叠和虚假IMF分量,同时能准确地表现信号的真实结构成分。
服务
把本文推荐给朋友
加入我的书架
加入引用管理器
E-mail Alert
RSS
作者相关文章
赵军
李林峰
郭天太
王道档
孔明
关键词 计量学故障诊断旋转机械希尔伯特-黄变换端点效应模态混叠边界局部特征尺度延拓法广义回归神经网络    
Abstract:In fault diagnosis of rotating machinery, Hilbert-Huang transform (HHT) is often used to extract the fault characteristic signal and analyze decomposition results in time-frequency analysis. However, end effect occurs in HHT, which leads to a series of problems such as modal aliasing and false intrinsic mode function(IMF). To solve this problem, a novel method to optimize end effect in HHT through combination of generalized regression neural network (GRNN) and boundary local characteristic-scale continuation (BLCC) to extend signal is proposed, then followed by empirical mode decomposition (EMD). Simulation and measurement experiment for the conditions of time domain, frequency domain and related parameters of Hilbert-Huang spectrum verified the effectiveness of the proposed method through comparison with the results obtained by mirror continuation. The experimental results show that the method can effectively inhibit end effect, reduce modal aliasing and false IMF components, and accurately show the real structure of signal components.
Key wordsmetrology    fault diagnosis    rotating machinery    HHT    end effect    modal aliasing    BLCC    GRNN
收稿日期: 2014-12-09      发布日期: 2016-07-29
PACS:  TB936  
  TB973  
基金资助:国家自然科学基金(51375467);质检公益性行业科研专项(201410009);浙江省公益性技术应用研究计划项目(2013C31098)
通讯作者: 李林峰     E-mail: lilinfeng_job@163.com
作者简介: 赵军(1960-),男,黑龙江哈尔滨人,中国计量学院教授级高工,主要研究方向为机械振动噪声控制与信号处理。teampaper209@cjlu.edu.cn
引用本文:   
赵军,李林峰,郭天太,王道档,孔明. 优化HHT端点效应的新方法[J]. 计量学报, 2016, 37(5): 509-514.
ZHAO Jun,LI Lin-feng,GUO Tian-tai,WANG Dao-dang,KONG Ming. A New Method to Optimize Endpoint Effect in HHT. Acta Metrologica Sinica, 2016, 37(5): 509-514.
链接本文:  
http://jlxb.china-csm.org:81/Jwk_jlxb/CN/10.3969/j.issn.1000-1158.2016.05.12     或     http://jlxb.china-csm.org:81/Jwk_jlxb/CN/Y2016/V37/I5/509
京ICP备:14006989号-1
版权所有 © 《计量学报》编辑部
地址:北三环东路18号(北京1413信箱)  邮编:100029 电话:(010)64271480
本系统由北京玛格泰克科技发展有限公司设计开发  技术支持:support@magtech.com.cn