1.Key Lab for Thermal Science and Power Engineering of Ministry of Education, Department of Thermal Engineering,Tsinghua University, Beijing 100084,China
2. National Research Center of Gas turbine and IGCC Technology,
Department of Thermal Engineering, Tsinghua University, Beijing 100084, China
Abstract:The model for radiation temperature measurement of turbine blades is established considering the effect of reflected thermal radiation. The effective emissivity of blade surface is introduced and the temperature measurement method based on the effective emissivity is discussed. The radiative view factors of blade surfaces are determined by the finite element method using the temperature distribution data. Then the effective spectral emissivity distribution of the blade surface is calculated based on the radiative view factors. The analysis provides a reference in the applications of temperature measurements based on the effective emissivity.
[1]蒋洪德,任静,李雪英等.重型燃气轮机现状与发展趋势[J].中国电机工程学报, 2014,34(29):5096-5102.
[2]蒲星星,刘尚明,蒋洪德.重型燃气轮机状态能观度分析及其在故障诊断中的应用[J].中国电机工程学报,2012,32(02):117-122.
[3]Yuri M, Masada J, Tsukagoshi K, et al. Development of 1600 C-class high-efficiency gas turbine for power generation applying J-Type technology [J]. Mitsubishi Heavy Industries Technical Review, 2013, 50(3):1.
[4]丁林. 涡轮叶片热分布测量方法研究[D].哈尔滨:哈尔滨工程大学,2013.
[5]冯驰,丁林,胡杨.涡轮叶片表面温度分布测量方法[J].应用科技,2013,40(04):17-20.
[6]萧鹏,孙晓刚,戴景民.多波长法金属防热瓦表面温度及发射率的测量[J].光电工程, 2007,34(8):59-63.
[7]符泰然,程晓舫,钟茂华.谱色测温法相关应用问题的理论预测分析[J].中国科学(G辑:物理学 力学 天文学),2008,28(02):194-205.
[8]符泰然,程晓舫,陆少松,等.三波长温度测量方法[J].计量学报,2004,25(2):123-126.
[9]Payri F, Pastor J V, García J M, et al. Contribution to the application of two-colour imaging to diesel combustion [J]. Measurement Science and Technology, 2007, 18(8): 2579.
[10]Khatami R, Levendis Y A. On the deduction of single coal particle combustion temperature from three-color optical pyrometry [J]. Combustion and Flame, 2011, 158(9): 1822-1836.
[11]Kappagantula K, Crane C, Pantoya M. Determination of the spatial temperature distribution from combustion products: A diagnostic study [J]. Review of Scientific Instruments, 2013, 84(10): 104902.
[12]Simmons D F, Fortgang C M, Holtkamp D B. Using multispectral imaging to measure temperature profiles and emissivity of large thermionic dispenser cathodes [J]. Review of scientific instruments, 2005, 76(4): 044901.
[13]Fu T, Duan M, Liu J, et al, Spectral stray light effect on high-temperature measurements using a near-infrared multi-wavelength pyrometer [J]. Infrared Physics & Technology 2014,67: 590–595,
[14]Fu T, Liu J, Duan M, et al. Temperature measurements using multicolor pyrometry in thermal radiation heating environments[J]. Review of Scientific Instruments, 2014, 85(4): 044901.
[15]De Lucia M, Masotti G. A scanning radiation thermometry technique for determining temperature distribution in gas turbines[J]. Journal of Engineering for Gas Turbines and Power, 1995, 117(2): 341-346.
[16]Gao S, Wang L, Feng C. Multi-spectral pyrometer for gas turbine blade temperature measurement[C]//SPIE Optical Engineering Applications. International Society for Optics and Photonics, San Diego, CA, US,2014: 920217-15.
[17]Kerr C, Ivey P. An overview of the measurement errors associated with gas turbine aeroengine pyrometer systems[J]. Measurement science and technology, 2002, 13(6): 873.
[18]Mori M, Novak L, Sekav?nik M. Measurements on rotating blades using IR thermography[J]. Experimental Thermal and Fluid Science, 2007, 32(2): 387-396.
[19]Estevadeordal J, Wang G, Nirmalan N, et al. Multicolor techniques for identification and filtering of burst signals in jet engine pyrometers[J]. Journal of Turbomachinery, 2014, 136(3): 031004.
[20]张涛,孙冰.复杂结构角系数计算方法[J].航空动力学报,2009,24(04):753-759.