1.National Institute of Metrology, Beijing 100013, China
2.Hebei Provincial Metrological Supervision and Inspection Institute, Shijiazhuang, Hebei 050051, China
Abstract:DN1000 Three Gorges power station penstock model experiment was conducted in Kaifeng national large water flow facility to research on the measurement accuracy of 18-path ultrasonic flowmeter.The measurement errors are obtained, which verified the flowmeter had high measurement accuracy even in a complex flow field.The flow field in model penstock was inferred by analyzing the flow velocity distribution obtained from flowmeter.Measurement errors were not sensible to installation angle and average flow velocity.The reliability of the model experiment would be enhanced by using Computational fluid dynamic (CFD)-aided design.
张亮,孟涛,王池,刘文生,胡鹤鸣. 18声道超声流量计在DN1000三峡流道模型中的测量准确度研究[J]. 计量学报, 2011, 32(z1): 91-95.
ZHANG Liang,MENG Tao,WANG Chi,LIU Wen-sheng,HU He-ming. Study on the Accuracy of 18-path Ultrasonic Flowmeter Used in DN1000 Three Gorges Power Plant Penstock Model. Acta Metrologica Sinica, 2011, 32(z1): 91-95.
[1]Gawne K D,Doering J C.Marquez Santos.Developing an Acoustic Method of Turbine Calibration[C].International Group for Hydraulic Efficiency Measurement, Montreal,Canade:1996.
[2]Wiliam Biela, Antonio E.Marquez Santos.Installation of 4 and 8-Path Acoustic Flow Meters in Guri Hydroelectric Power Plant[C].//International Group for Hydraulic Efficiency Measurement Montreal,Canade:1996.
[3]Alois Nichtawitz, Peter Grafenberger, et al.Discussion on acoustic flow measurement method[C].International Group for Hydraulic Efficiency Measurement,Lucerne,Switzerland 2004.
[4]IEC41, International Code for the Field Acceptance Test of Hydraulic Turbines[S].
[5]ASME PTC 18-2002(Revision of PTC18-1992), Hydraulic Turbines Performance Test Codes[S].
[6]孟涛,王池,陈海滨,等.用模型实验方法研究三峡电站流量计准确度[J].计量学报.2010,31(6): 509-512.